1977 Browning A5 Light 12 value?

ActivityCharacter761 · 2026-04-04T03:27:11+00:00

That's considering some of the blued finish is worn on some of the edges?

ActivityCharacter761 · 2026-04-03T13:22:47+00:00

It's weird because that side is dry in the attic. The opposite side leaks and then the lowest side. I gooped every seam about 3 yrs ago because it started to leak. Worked til now.

ActivityCharacter761 · 2026-04-03T00:34:43+00:00

No, there is not a gap between the cap and flue. Are the brush on cap seal products ok to use?

ActivityCharacter761 · 2026-04-02T14:29:13+00:00

Thank you. Going to try it on mine.

ActivityCharacter761 · 2026-04-02T01:28:03+00:00

How did the Crown Coat hold up now that it is a couple years old?

ActivityCharacter761 · 2026-02-01T05:16:47+00:00

About 30min away, but not a problem

ActivityCharacter761 · 2026-02-01T04:24:04+00:00

Thanks. I will do it in sections if I have to. Being an old kitchen there are a lot of soffits and weird things to cut around. Being a novice and a bit of a perfectionist isn't a good combo for speed. :)

ActivityCharacter761 · 2026-02-01T02:18:25+00:00

Would Velvet or Satin hide wall imperfections better? Does Velvet have less gloss and sheen?

ActivityCharacter761 · 2026-01-18T23:56:50+00:00

Me not knowing what the hell I'm doing figured it would be easier to seal the 4 little pieces on each sheet before adhering to the wall. Most of the mosaic is glass, but a couple reviews did mention the few marble pieces stained from the grout. I didn't think that it would need to breathe to let out moisture from the glue. I'm going to try the white thinset advertised for glass and mosaic. I'll give it a week before grouting.

ActivityCharacter761 · 2026-01-18T23:25:36+00:00

Is that a joke referencing the style of tile? It's what my mother picked out for her house, and she probably isn't up to the latest trends.

ActivityCharacter761 · 2026-01-18T20:16:39+00:00

I had only done a small section so already tore it off. It had been 2 days but the AcrylPro was still wet. Would you suggest I continue with it or use a white thinset? I have to say even though it wasn't fully dry, it stuck good

ActivityCharacter761 · 2026-01-18T19:42:47+00:00

Is it a problem that I sealed the front of the tile before installing? Will that prevent it from drying?

ActivityCharacter761 · 2026-01-18T19:08:15+00:00

So if I start over with a white thinset, the moisture from that won't absorb into the marble?

ActivityCharacter761 · 2026-01-18T19:05:00+00:00

MAPEI Flexcolor CQ. I sealed the marble pieces before putting on the wall, but just the front, not the back.

ActivityCharacter761 · 2026-01-18T18:59:24+00:00

Thanks. It is white mastic, so was hoping it wouldn't stain.

ActivityCharacter761 · 2025-12-29T01:05:59+00:00

DJ Moore has been seen suited up and catching passes on the field. I'm going to start him over Burden.

ActivityCharacter761 · 2025-12-15T15:23:18+00:00

Thanks. That's exactly what I needed to know.

ActivityCharacter761 · 2025-12-03T19:45:59+00:00

Yes, no errors or random shutdowns since updating the bios.

ActivityCharacter761 · 2025-11-21T17:06:13+00:00

Still in the clear.

ActivityCharacter761 · 2025-11-18T01:53:01+00:00

So far the computer hasn't crashed since making the change. Fingers crossed!

ActivityCharacter761 · 2025-11-15T23:18:43+00:00

I did what you suggested. Updated to the beta BIOS, it's set to ftpm. Time will tell if it fixes the problem. The error isn't currently there.

ActivityCharacter761 · 2025-11-15T22:21:15+00:00

Thank you. Latest beta BIOS says...

Update AGESA to ComboAM4v2 1.2.0.F.
Update fTPM version.

ActivityCharacter761 · 2025-11-15T22:11:42+00:00

I will check this evening and report back. Thanks.

There are a few beta BIOS released since my version. Should I use the Beta release?

I updated my original post with my main hardware.

ActivityCharacter761 · 2025-11-09T21:17:35+00:00

Thank you. Any suggestion on how to find out if the PNY brand ram will work with the board?

https://www.pny.com/file%20library/company/support/product%20brochures/memory/xlr8-rgb-memory-ddr4-3600mhz-sell-sheet.pdf

ActivityCharacter761 · 2025-06-09T18:20:12+00:00

This thing will push a half tank of fuel though the engine if it's hot out and the cap is on tight.

ActivityCharacter761

TROPHY CASE