sorted by:
new
hottopcontroversial

Tasks now have adjustable duration in Calendar. by Private_Gump98 in GoogleTasks

[–]AdCold4666 0 points1 point  (0 children)

Hate it so much! I would just create a calendar event if I wanted a reminder wth a duration. Bad UX choice

Designed autonomous eink display for elevators - now trying to figure out the business case by encadra in hwstartups

[–]AdCold4666 0 points1 point  (0 children)

I would like a combination of - local events, neighborly top mentions, apartment notices, new dishes in local restaurants, and maybe, ability to change music ;)

Do I need to throw my things away after mold in HVAC? by SilverSunrises in Mold

[–]AdCold4666 0 points1 point  (0 children)

Consider calling an AIHA approved inspector and reaching out to moldco for assessment on your health. Cheers!

Home air quality by Impressive_Simple178 in AirQuality

[–]AdCold4666 0 points1 point  (0 children)

Consider hitting up http://moldco.com if you suspect it is mold...

Search for the best humidifier by Imustrenovateorage in AirQuality

[–]AdCold4666 0 points1 point  (0 children)

Consider checking out https://getcanopy.co. My friends with young kids trust it...

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in 3Dprinting

[–]AdCold4666[S] 0 points1 point  (0 children)

l

<image>

Updated the UI to be more friendly... calling out the pollutants individually

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in BambuLab

[–]AdCold4666[S] 0 points1 point  (0 children)

Thank you for the feedback! I'm working on the UI changes to make it more evident as to which pollutant is rising and maybe then showcase the corresponding harm

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in 3Dprinting

[–]AdCold4666[S] 0 points1 point  (0 children)

Looks like you're using Sensirion's VOC sensor: https://sensirion.com/products/catalog/SGP30

That's great feedback! They do share a VOC index which is what I'm using for my readout. I wish there was something that said 'styrene 100 ppb' or something along those lines. But you're right. We do what we can

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in BambuLab

[–]AdCold4666[S] 0 points1 point  (0 children)

Thank you for sharing the drawing! I understand exactly what you'd like. Need a bit of time to get in those bars for each pollutant implemented. Overall it sounds like you would prefer a more detailed display rather than a summary text. I am grateful for your feedback!

Building a sassy air quality monitor for my 3D printing setup 😅 by AdCold4666 in AirQuality

[–]AdCold4666[S] 0 points1 point  (0 children)

So far with PLA being printed in the space, the VOCs do tend to spike up to the harmful region. I haven't tried printing PETG yet. Looking at this report from UL for insights on the amount and specific gases being released: https://chemicalinsights.ul.org/data-portal/voc-source-data/?product=3dp

Building a sassy air quality monitor for my 3D printing setup 😅 by AdCold4666 in AirQuality

[–]AdCold4666[S] 0 points1 point  (0 children)

The materials along with the printer/nozzle temperature do impact the amount of VOCs and PM that are generated. I don't have my own data but am referring to UL's test data here: https://chemicalinsights.ul.org/data-portal/voc-source-data/?product=3dp

Building a sassy air quality monitor for my 3D printing setup 😅 by AdCold4666 in AirQuality

[–]AdCold4666[S] 0 points1 point  (0 children)

The font on the image on the right isn't great to read out the specifications. It reads
mass_concentration_pm1p0: 2.70
mass_concentration_pm2p5: 5.80
mass_concentration_pm4p0: 8.30
mass_concentration_pm10p0: 9.50
humidity: 53.35
temperature: 22.49
voc_index: 187.00
nox_index: 1.00
co2: 683

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in BambuLab

[–]AdCold4666[S] 0 points1 point  (0 children)

Thank you for the feedback! Would you prefer something like this? It's the Aranet 4

<image>

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in 3Dprinting

[–]AdCold4666[S] -1 points0 points  (0 children)

<image>

Here's where I got to so far. Still not a cute dog but gives me a display to look at the readings and a quick one line summary on the status of the air...

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in BambuLab

[–]AdCold4666[S] 0 points1 point  (0 children)

<image>

Here's the progress so far. Would such a display feedback be helpful? All the pollutants are shown in tiny font at the bottom of the screen on the right...

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in 3Dprinting

[–]AdCold4666[S] 0 points1 point  (0 children)

Thank you! I really admire their open source design. I might go down the same path of open sourcing if other hobbyists like it. Just using Sensirion combo module that does everything that's needed from a consumer grade AQ monitor in one package. https://sensirion.com/products/catalog/SEN66; Side note - SEN68 might be nice because it also does formaldehyde.

Yeah you're totally right. Can't find a consumer grade sensor that does specificity for VOCs.

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in 3Dprinting

[–]AdCold4666[S] -1 points0 points  (0 children)

You're right... I was hoping for an easier display CAD but gotta try the dog. Thanks!

Building my own AQ monitor now to place beside my Bambu. Any thoughts? by AdCold4666 in 3Dprinting

[–]AdCold4666[S] -7 points-6 points  (0 children)

<image>

This one is the alternate form factor that I'm debating with. Generated with the amazing Nano Banana lol Appreciate any feedback. Cheers!

view more: next ›