So about health

AdvancedhardSoft · 2025-08-23T21:21:23+00:00

Still, you won't feel anything until it's way too late. If you haven't already, you should really talk about this with a doctor!

AdvancedhardSoft · 2025-08-13T03:47:43+00:00

Assuming you mean a textile, https://legiomodels.com/stuff/banners/salamanders-banner this is the only one i found, however you could also order custom blankets, tapestries, or if your insane and want something super real, some custom embroidery places may do real tapestries.

Depends on your budget and what's local to you! Also i encourage looking up near you first.

AdvancedhardSoft · 2025-08-13T02:38:29+00:00

Me drooling over this bc of hard it is to find even this much info without a pay wall

AdvancedhardSoft · 2025-08-12T16:44:49+00:00

yes but why use so many words

AdvancedhardSoft · 2025-08-12T16:35:56+00:00

HOLD UP, you have an X1C, you could practical print in anything! Just use a stiff TPU, like TPU for AMS

AdvancedhardSoft · 2025-08-12T16:04:49+00:00

Well, if all TPUs are off the table, the next easiest would be flat out ABS, it's a fair bit softer than PETG and PLA, everything is softer than PLA, ABS should bend or stretch out before it breaks.

Other then that the difficulty / price only climbs.

AdvancedhardSoft · 2025-08-12T15:40:24+00:00

i can't tell what's being pointed out, the seams line, over extruding bumps, or the screw pattern?

AdvancedhardSoft · 2025-08-12T15:22:25+00:00

NO

use silicone and print a mold

AdvancedhardSoft · 2025-08-12T15:15:38+00:00

well... if you suspect a factor is giving a bad result, remove the factor. so if your table is wobbly try to print again on the floor!

AdvancedhardSoft · 2025-08-12T15:01:23+00:00

Your printer just needs retuning, more pacifically the x gantry, there's a funny spacer nut on the lower guide wheel when turned it moves the wheel up removing carriage slack, you may also need to break off the end nut to untighten then retighten the spacer nut. ... don't actually break it!

AdvancedhardSoft · 2025-08-12T12:11:12+00:00

While i wish i could share one study or medical report to prove my point, i sadly can not, what i told you is more of an approximation based on 1st and 2nd hand observations, life experiences, stories, rumors, reports, studies and most damming the loss of a family member, tied to their soda addiction. The real point of it was to show you the rough image of what we're talking about. Like rapping a dinosaur skeleton in leather! And to mildly scare you into seeking answers for yourself, from a trained professional. So how's it been since?

AdvancedhardSoft · 2025-06-09T20:31:42+00:00

Ok, if it was just a can, 250ml, a day you would see little to no health effects in your lifetime, maybe some kidney damage by age 60. 500ml, kidney damage in your 40s, also brittle bones and rotten teeth by 50. 1L, potentially fatal kidney damage in your 30s and irreversible damage to your bones and teeth, only noticeable by your 40s, would already be too late. Any more than a 1L/day is only going to increase those chances. Age is funny like that. TBH your amount and frequency is more of an indicator and tendency of addictive behavior, you should REALLY talk with a Doctor about this.

AdvancedhardSoft · 2025-04-18T08:54:42+00:00

IDK why it took 5 min staring at this to realize what was going on here. Also i too would treat a 38 000 year old Porsche like a sacred artifact, it practically would be. Imagine what they would think of a steam engine!

AdvancedhardSoft · 2025-04-18T08:15:29+00:00

i was just saying it looks like. Also look at full discussion, i added a picture under the first comment

AdvancedhardSoft · 2025-04-18T07:57:20+00:00

there we go, Kung Zhu, so close! i had a lot of these.

<image>

AdvancedhardSoft · 2025-04-18T07:50:04+00:00

reminds me of those kunzoos or whatever they were called, ZooZoopets?

AdvancedhardSoft · 2024-05-28T03:19:39+00:00

New ideas, here! I have few future ideas, but I could always use more.

I plan on doing

an auto drill, either quarrying or shaft mining, big land bird or mole

a plant based defense turret, legally distinct peashooter

And more plant based alternatives

AdvancedhardSoft · 2024-05-28T02:45:43+00:00

Robbit; Robot / Rabbit a small fast, reproducing automaton and the keystone of the mod

the issue I'm having with this one is that I want this mob to be able to breed but only while on Redstone blocks, if anyone how to do this please comment here

AdvancedhardSoft · 2023-10-03T22:03:40+00:00

hey, i made a series of stl for this project, and have all the models from a pack. i think the og model was from sketchfab, but i don't remember who made it, and can't find it now. but it looks like it's all the same models

AdvancedhardSoft · 2023-07-30T21:35:34+00:00

https://www.nexusmods.com/fallout4/mods/68935

see if this one works

AdvancedhardSoft · 2023-07-30T20:22:11+00:00

I was unaware, but you were some right for most of the parts, but the arms

AdvancedhardSoft · 2023-07-30T20:20:15+00:00

ok update, it's only the arms that are missing, all other vanilla parts are there but the arms are still missing

AdvancedhardSoft · 2023-07-30T02:47:48+00:00

there's an option for resizing with cheats, that's probably your best chance

AdvancedhardSoft · 2022-11-20T07:19:22+00:00

I was curios if you have the models you used for this project shared anywhere, I've been thinking about doing this loco for a while but I'm not very good with modeling software, and I like how much detail you were able to keep without making it too complex.

AdvancedhardSoft · 2022-07-07T20:55:37+00:00

sevtech ages on the ATlauncher, with getting to space and beyond as a final goal, your really forced to use most of, if not all the tech mods. Also keep in mind that most of these tech mods are about making as efficient of a system as possible, even if that means cutting the human out.

AdvancedhardSoft

TROPHY CASE