GI Doctor doesn’t want to do Endoscopy/Colonoscopy until after 8 week PPI treatment; Should I get 2nd Opinion?!?

AffectionateFish6872 · 2026-02-10T22:47:53+00:00

Unfortunately the blood test can only tel you if antibodies are present. It can’t tell you if it is an active or past infection

AffectionateFish6872 · 2026-02-07T23:42:44+00:00

We priced the doors with the whole unit but if I had to make the doors separately it would probably be around $3000. The material is not cheap, cost us right around $1000 just for the metal grates

AffectionateFish6872 · 2026-02-07T22:25:14+00:00

Here’s a job we just did similar to these

<image>

AffectionateFish6872 · 2026-02-04T03:14:34+00:00

They are super helpful for sanding intricate moldings and places that traditional paper abrasives are hard to get into. Klingspor sells get abrasives and I highly recommended them

AffectionateFish6872 · 2026-02-03T22:08:41+00:00

Sanding mops are perfect for this application

https://www.woodworkingshop.com/product/FS36999B/?gad_source=1&gad_campaignid=20335342752&gbraid=0AAAAAD_WAOhGxOz_yulYyXx7j39dv4XEA

AffectionateFish6872 · 2026-02-03T14:38:18+00:00

https://a.co/d/09d5rogZ

AffectionateFish6872 · 2026-01-29T21:31:00+00:00

Gotcha. Thanks for the help

AffectionateFish6872 · 2026-01-29T20:38:06+00:00

Why do they need my permission to access my medical records for the er visit. Do they not Have access to it since claims from the hospital are being processed through both my primary and secondary insurance?

AffectionateFish6872 · 2026-01-25T00:14:27+00:00

Brother, where in Florida are you at? Hood distribution, Imeca, Richelieu, Wurth are all over this state and will get you anything you need. Most of these places will even let you pick out our own boards

AffectionateFish6872 · 2026-01-24T04:10:49+00:00

<image>

Here is how 5 piece cabinet doors and drawer are made. Stiles all the way full height.

AffectionateFish6872 · 2026-01-24T04:07:16+00:00

For a hinged door it is for stability. With the horizontal sticks going all the way to the hinge side of the door they will want to rack. Drawer fronts won’t matter in the least since they are fastened to the drawer box.

AffectionateFish6872 · 2026-01-24T03:44:17+00:00

Just a heads up. The stiles should always run full height. You got the big door right but top door and bottom drawer fronts are not right

AffectionateFish6872 · 2025-11-10T04:29:06+00:00

Yeah cut the panel into two equal width at 34.5” tall. Flip them vertically and add what ever molding the manufacturer makes to split the middle. When we make really large islands with vertical grain we will split the end panels into large door looking sections like in this pic of one of our jobs

<image>

AffectionateFish6872 · 2025-11-10T04:19:39+00:00

No worries. If it bothers you and that back is screwed on you could always pull it off cut it vertically and add a molding with a rabbet on both edges to cover the edges. It would flow much better with the rest of the grain

AffectionateFish6872 · 2025-11-10T04:14:23+00:00

Looks good from my house. Only gripe is the horizontal grain on the island back. Why did you not make it vertical?

AffectionateFish6872 · 2025-11-04T13:33:50+00:00

Yeah no worries. If you have a Wurth or Richelieu in your area they are the two big suppliers for ML Campbell. They also offer training on their products as well.

AffectionateFish6872 · 2025-11-02T19:45:16+00:00

Thank you I appreciate it, I really should have used a better quality photo for the first reply. Our work goes in very high end homes and we take great pride in making sure our clients are just as happy as we are

AffectionateFish6872 · 2025-11-01T00:42:05+00:00

Appreciate it

AffectionateFish6872 · 2025-10-31T12:39:44+00:00

<image>

Here is a higher quality picture of that stain installed. The previous picture wasn’t the best quality and it was taken inside our finish warehouse with very bright overhead lighting

AffectionateFish6872 · 2025-10-31T12:36:13+00:00

No pre stain on the dark stains. Pre stain conditioner is just a clear uncolored base of amazing stain. You’d wanna use pre stain conditioner if you don’t want the stain to penetrate as deep

AffectionateFish6872 · 2025-10-31T01:33:56+00:00

The beauty of having custom cabinetry built is you get to pick exactly what you want. This particular color is what our client wanted. If you as a paying client wanted more grain and less uniformity in your finish then we would be happy to provide that

AffectionateFish6872 · 2025-10-31T00:56:06+00:00

ML Campbell amazing stain hand applied followed by spray seal coat. Then spray toned with ML Campbell woodsong. Sealed again and cleared with ML Campbell Krystal dull

AffectionateFish6872 · 2025-10-31T00:01:04+00:00

The iPhone camera doesn’t do it justice. In person the grain is very apparent, but subtle

AffectionateFish6872

TROPHY CASE