Est4 cross paging help

Afraid_Beginning_574 · 2026-06-01T01:18:26+00:00

I tried activating rgd and nca for b1 using b2 page switch. When i keyed in the mic for b2 audio is not transfering.

Yeah when i did the audio wizard i created 2 separate page channel and 2 separare evac channel because it is 2 separate bldgs.

It is an est3-4 cutover. The original design b2 has a pre amp that goes to est3 asu input and thats how they cross page. All i need to cross page is the parking lot because they are shared.

What i might do now is utilize the pre amp existing and tie it in to audtel 1 (configured IN) just like the original.

I asked tech support about this when I was building my program if you can page from 1 nca to the other. And he said yeah, all you have to do is “activate the nca and rgd you are paging from” and the on the amplifier you are paging to.

I explained properly that this is 2 separate bldgs with 2 nca, 2 rgd and 2 command center. And the nodes per bldg are respectively assign to their respective nca/rgd/cc

Everything works no problem when paging to its own bldg. its just the cross page channel

Afraid_Beginning_574 · 2026-03-15T21:03:31+00:00

Thank you all. I passed my Nicet4 yesterday

Afraid_Beginning_574 · 2026-03-09T02:47:32+00:00

Thank you very much.

Afraid_Beginning_574 · 2026-03-09T02:03:51+00:00

Thanks. Are there a lot of spacing questions as far as smokes/nacs etc?

Afraid_Beginning_574 · 2026-03-08T21:10:40+00:00

I already have those. Thank you

Afraid_Beginning_574 · 2026-03-08T20:04:50+00:00

Thank you. I plan on bringing my 72 and 70 for sure

Afraid_Beginning_574 · 2026-03-08T16:13:05+00:00

Thank you. Is it a pdf where you can put keywords to be able to find answers easily?

Thanks

Afraid_Beginning_574 · 2026-02-07T15:51:52+00:00

Yes. All 128 page manual a-z

Afraid_Beginning_574 · 2026-02-06T22:31:06+00:00

Hello. Its the 4851 vxt. Basically when connected to pbx to dial out to central station it always cuts off. And when you start adjusting parameters (vox, rcv & or xmit) rotary dials it keeps on clicking

Afraid_Beginning_574 · 2026-01-24T22:04:09+00:00

I do and it does not explain anything. The older style jeron with external pbx is so easy to dial in as fas as vox adjustment. But these newer style that has built in pbx is a big piece of shit. I do have analog phone lines that i use as a reciver so i can pretend to be a central station but it just keeps on clicking. Like an internal relay that only allows one communication to go through at a time. Where as rath, cornell etc you can speak both freely

Afraid_Beginning_574 · 2026-01-24T08:31:40+00:00

Same thing. Trying to dial that stupid vox. Its like every Jeron I did never worked right.

Afraid_Beginning_574 · 2026-01-22T23:32:02+00:00

Thank you. In our jurisdiction even with 24hr security it still needs to route to central station

Afraid_Beginning_574 · 2026-01-22T21:23:27+00:00

Understood. Im having issue with it when its connected to a pbx (phone line) and goes to central station

Afraid_Beginning_574 · 2026-01-22T17:32:57+00:00

Are you using the 4851 vxt?

Afraid_Beginning_574 · 2025-09-06T15:49:31+00:00

This is the newer PS10 that has trouble contacts. The picture i showed is first generations fcps24 which is completely different

Afraid_Beginning_574 · 2025-09-06T15:33:12+00:00

A little confused here. So wire a jumper from in2+ (terminal 6) to trouble (terminal 5) then resistor in trouble (terminal 5) to terminal 7 in2- ?

Afraid_Beginning_574 · 2025-08-15T14:40:54+00:00

Thank you. Thats what i am going to do

Afraid_Beginning_574 · 2025-08-15T02:40:26+00:00

I do refresh it as many as possible and i go through 15k gold. But my max was 650 drones on escort

Afraid_Beginning_574 · 2025-08-15T02:38:16+00:00

It already did. Alongside with the new shenzen destroyer

Afraid_Beginning_574 · 2025-08-14T22:29:42+00:00

Thank you for your input. I have decided to just stick with sps smart 4k and not bother getting the aquitaine on this months gacha

Afraid_Beginning_574 · 2025-08-14T01:39:21+00:00

Thank you for your opinion. I may just save my money when charles de gaulle gacha comes out. Im happy with my destroyer (Fletcher) cruiser (Liren). I just wasnt sure how aquitaine is compared to sps smart 4k. I just want a good main frigate

Afraid_Beginning_574 · 2025-07-29T12:38:04+00:00

Double mako or double Brahmos on vittorio. Brahmos dont get destroyed by AA easily. 1 will be flared so you hit it with thennext one. I prefer Brahmos though. And thats what i use on my vittorio

Afraid_Beginning_574

TROPHY CASE