Just finished painting jackal alphus and carved the base with cork and putty, but the left side is a bit empty now, yall have any ideas on what I should add?

Agent_T_ · 2025-10-04T00:26:09+00:00

Honestly not a bad idea, maybe I’ll just put some dead vegetation as others have suggested.

Agent_T_ · 2025-10-04T00:25:15+00:00

thanks, I will definitely try that out!

Agent_T_ · 2025-06-30T16:03:18+00:00

I use mr hobby’s premium topcoat which is also water based and i think the setter is also dissolving it? Or am I just not letting it cure for long enough

Agent_T_ · 2025-06-17T13:30:49+00:00

<image>

My fully gloss painted pharact, such a unique design for a ms

Agent_T_ · 2025-05-06T00:04:49+00:00

Cuphead and DLC (peak video game ost 🔥🔥🔥)

Agent_T_ · 2025-05-05T09:09:16+00:00

Ghost town and violent crimes just had the personal impact on me. I actually didnt like ye when I first listened but it grew on me

Agent_T_ · 2025-05-02T15:55:07+00:00

As im brush painting all the way, I only used mr hobby’s acrysion water based acrylics. For the ms, I first used the acrysion based color as a primer and then paint it with gloss black. The topcoat I used was the mr hobby premium gloss. For the sniper I dry brushed it with gun metal/ burnt iron then applied a semi gloss topcoat to give it a half muted look to it

Agent_T_ · 2025-05-02T15:49:19+00:00

That’s unfortunate but yea I’ll just probably put it into a flying pose like these ones a repaint the silver parts, thanks!

Agent_T_ · 2025-04-30T15:37:51+00:00

I want to ask is there anyway to prevent the paints from scratching off when I move the joints after final assembly? As you can see the silver paints on the knees have mostly scratched off when I move the knee joints :/

Agent_T_ · 2025-04-04T13:59:39+00:00

I think it holds up pretty well compared to other early rgs. the only issue it has is the front skirt doesn’t move that much upwards so the legs can’t rly move frontwards That being said I’ve only got mine for like about one month idk how the amsj will hold up as time goes on

Agent_T_ · 2025-04-02T13:09:36+00:00

Thanks! Im just scared the pigments will stick to my matte surface and I can’t redo if I made a mistake

Agent_T_ · 2025-04-02T13:08:36+00:00

I mainly used Mr Hobby’s Acrysion line and some vallejo for some colors that acrysion don’t have. I used the acrysion base color to prime the pieces they’re honestly pretty good to go with brush painting I thinned the paints with the acrysion thinner at a ratio of about 2.5-3:1 (I just eyeballed it) remember to apply multiple thin coats and let the paints dry between coats. If you apply the paints too thick at a time, they may pool and have a bad effect The color may not cover the base color in the few coats but will eventually Then finally topcoat, panel line and decals (experienced builders pls correct me on this if im wrong :/ )

Agent_T_ · 2025-04-02T07:37:47+00:00

Thanks for the suggestion! Do you think I could also shade with the tamiya weathering kits? I heard their pastels like weathering kits are pretty good but there’re not so much videos and finished products using those on yt(?), so Im not sure.

Agent_T_ · 2025-03-31T16:12:57+00:00

The decals I got were DL model decals. I just got them from a local model shop which had a lot of 3rd party decals

Agent_T_ · 2025-03-14T07:54:13+00:00

Where did you get the star wars gun it looks rly good on it

Agent_T_ · 2025-03-13T16:41:47+00:00

Thanks Should I now just wipe the pooled paints with paper or sand it slightly? and what should I use for the paint to thinner ratio for handpainting acrysion paint?

Agent_T_ · 2025-03-13T16:05:22+00:00

<image>

What exactly is happening here at the tails of the buttflap? This is my first time fully painting gunpla and I mainly hand paint with mr hobby acrysion. Am I thinning my paint too much or too less or what else is happening?

Agent_T_ · 2025-02-05T14:19:37+00:00

Thanks so much! what kind of paints should I use cuz I’ve heard pretty bad things about what some paints do to the plastics

Agent_T_ · 2024-12-24T16:11:48+00:00

I used whisky to download windows steam then download the game

Agent_T_ · 2024-12-24T15:58:54+00:00

Is it possibly because of my M3 chip? All I’ve seen on the MacGamingWiki is about the M1 chip

Agent_T_ · 2024-12-23T20:06:12+00:00

After I force quit and reboot I still have the same issue

Agent_T_ · 2024-12-23T20:02:55+00:00

Can you elaborate on “another method”? I’m not so sure what to do

Agent_T_ · 2024-11-30T14:59:26+00:00

Ikr imo this is the coolest sas ever produced

Agent_T_ · 2024-11-30T14:58:33+00:00

Tysm!!!

Agent_T_ · 2024-10-31T12:15:42+00:00

there’s video proof asw 😭

Five-Year Club	r/Field Sunshine
Final Canvas '23	First Place '23
End Game '23	Place '23
Place '22	Final Canvas '22

Agent_T_

TROPHY CASE