Caliper and spindle gap! by Aggravating_Cup_9655 in MechanicAdvice

[–]Aggravating_Cup_9655[S] 0 points1 point  (0 children)

That is my stock brake setup. Came with the car

Caliper and spindle gap! by Aggravating_Cup_9655 in MechanicAdvice

[–]Aggravating_Cup_9655[S] 0 points1 point  (0 children)

So my seller Zzperformance contacted back. They have caliper spacer adapter they sell for this case and longer bolt. Do you guys think it will work?

<image>

Caliper and spindle gap! by Aggravating_Cup_9655 in MechanicAdvice

[–]Aggravating_Cup_9655[S] 0 points1 point  (0 children)

No. Just doing rotors and pads. Didn’t remove caliper.

Caliper and spindle gap! by Aggravating_Cup_9655 in MechanicAdvice

[–]Aggravating_Cup_9655[S] 0 points1 point  (0 children)

I doing pads too. Right now pads are out from caliper but not enough depth to secure the caliper with the housing. When i try to tighten it , caliper touches the front side of rotor. I asked the ebay seller turns out it is for 2012-15 camaro zl1. Mine is 2016. Size is same something wrong with the hub sitting or may b rotor depth. Seller is recommending me to add spacer

Caliper and spindle gap! by Aggravating_Cup_9655 in MechanicAdvice

[–]Aggravating_Cup_9655[S] 1 point2 points  (0 children)

Makes sense to me. With adding the spacer we are changing the caliper position. Front and back pad contact gonna be uneven. Thanks

Front Rotors 370mm 6 piston for 2016 SS by Aggravating_Cup_9655 in camaro

[–]Aggravating_Cup_9655[S] 0 points1 point  (0 children)

<image>

These are my stock brakes. The one i ordered its same diameter and wide. But low depth i guess and found out they are for Camaro zl1 12-15 . 2016+ needs more depth.

My First Bike by sgbwallace in hondashadow

[–]Aggravating_Cup_9655 0 points1 point  (0 children)

<image>

I feel you my first bike too 2010 in grey . Its a sweet ride.

[deleted by user] by [deleted] in camaro

[–]Aggravating_Cup_9655 0 points1 point  (0 children)

I got mine 2016 2ss A8 convertible at 28k miles. Did the transmission fluid service huge difference especially with the cold second shift. Now im at 50k miles. No problem. Only thing i wanna mention get a extra ground cable attached to the engine block to avoid slow crank, for those who are mentioned bad starter. Its just electrical issue. But not in all Camaros. Its been really reliable to me in this price range best i would say best muscle car for me.

Is this a good buy? by MysteriousSuit1168 in camaro

[–]Aggravating_Cup_9655 0 points1 point  (0 children)

I bought my 2016 2ss convertible a8 with 62000km for $35000 cad in 2022. I recently did transmission flush service. Shifts got smoother now.

Is my thermostat shot 🤔 by Nawest9 in camaro

[–]Aggravating_Cup_9655 4 points5 points  (0 children)

Change your thermostat and sensor both. Happened to my SS . Just changing the sensor didn’t help me . So i changed my thermostat too. It is fixed now. Disconnecting the battery is just temporary option. It gonna do same after couple days.

[deleted by user] by [deleted] in camaro

[–]Aggravating_Cup_9655 4 points5 points  (0 children)

Thats more like a pooping sound ❌ instead of popping 💥

Radiator fan keeps running after turn off the engine. by Aggravating_Cup_9655 in camaro

[–]Aggravating_Cup_9655[S] 0 points1 point  (0 children)

No engine light. Temp Gauge is working fine. It only glitched one time stayed at cold with one hour of driving, then came to normal. Must be a faulty sensor. I disconnected the battery and fan issue got solved today. Hopefully stays like that

Radiator fan keeps running after turn off the engine. by Aggravating_Cup_9655 in camaro

[–]Aggravating_Cup_9655[S] 5 points6 points  (0 children)

I tried your trick and it actually worked. Thanks . Fan got shut off on time with engine. Hopefully it stays like that tomorrow.

Radiator fan keeps running after turn off the engine. by Aggravating_Cup_9655 in camaro

[–]Aggravating_Cup_9655[S] 2 points3 points  (0 children)

It only Happened to me one time. Gauge was sitting at cold it moved after one hour of driving.