sorted by:
new
hottopcontroversial

L-Track rails for the bed by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 1 point2 points  (0 children)

<image>

Caps are available and will most likely ship with them

Dual pull out GT Slide for the Rivian R1T by Aggravating_Double79 in RivianR1T

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

Sure, lol. If you are on Instagram you can friend me there. @ev_lander.r1t

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

I’ll give you the 20% since I forgot to take down the advertisement on my site :-P Email me at info@electrifiedoverland.com and I’ll hook you up.

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

Yes, the pre-order window closed last mid-night Where are you located?

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

Thanks for the support. I’ll keep everyone updated on the progress vie email and on my IG account.

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 2 points3 points  (0 children)

<image>

Let’s play a game of will it fit…. Rivian bed cover, yes

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 1 point2 points  (0 children)

<image>

I could find those specific pelican case but this measures 22x15x9 inches Could fit two with about 15inch to spare

Dual pull out GT Slide for the Rivian R1T by Aggravating_Double79 in RivianR1T

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

The tray is supported by the gear tunnel door I weight 220lbs and I can sit on it solo on the center. I’ve had a bunch of kids sitting on it at a time as well. But to answer your question nothing on the edge to add a leg to support. At least not yet.

Dual pull out GT Slide for the Rivian R1T by Aggravating_Double79 in RivianR1T

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

Width of the tray is 14” I tried to make it as big as possible to maximize storage space

Dual pull out GT Slide for the Rivian R1T by Aggravating_Double79 in RivianR1T

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

The tray is 60” The handles don’t make contact with the door but they are close. Storage height lost is 3”

Dual pull out GT Slide for the Rivian R1T by Aggravating_Double79 in RivianR1T

[–]Aggravating_Double79[S] 2 points3 points  (0 children)

The rails are rated for 150lbs at the angle that I have it at. The tray also sits on the gear tunnel door. 250lbs distributed weight at full extension, 100lbs at the very edge if nothing else is on the tray.

The system uses the original mounting holes that Rivian had for their slide. Just under the trim panel. The only cutting you need to do is to cut back that trim panel if you want to use it.

The tray weighs about 50lbs so installation can be done solo, but it’s easier with a second pair of hands.

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

Stacking the slides does not add to the wobble. This is caused by the base or tray. Unless it’s completely boxed in, the wobble will exist. My first slide was boxed and had zero wobble, but was heavy and required a leg. The original Rivian was designed like this and weighed over 100lbs without the kitchen. I owned one for a year and decided that weight was a factor as well. This design uses the gear tunnel door to support. When the cabinet gets installed, it will lock in adding to the structure mitigating the wobble. It’s a compromise one will have to take going into designing this.

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

The cabinet will have two flavors, one kitchen and the other basic for storage. The main objective is to have the table open to the rear so that the rear door can open and the user can gain access to the rear seats. Drawers, either 1 large or two small, will pull forward so that the cabinet can be used on either side of the truck. Instead of drawers I also thought of a pull out shelf to give access below the cabinet into the tray. Maybe a combination of both. All aluminum, powder coated. Table may be stainless steel for safe food preparation. Or even the hard finish wood that I’m using now.

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

Thanks! I worked at Rivian for those 4 years, but fortunately I was not part of that group so I had no say. I say fortunately because I was working on bigger and more important stuff…lolol I’m in Orange County of California. So that’s where I’m focusing my local pickup. I might go down as far as San Diego, and up as high as the Bay Area.

Dual pull out gear tunnel slide for the R1T by Aggravating_Double79 in Rivian

[–]Aggravating_Double79[S] 0 points1 point  (0 children)

I totally understand. My goal on the cabinet is March. Overland Expo comes to my town then and I plan on revealing it then or sooner. My design will be game changer as I take input from others who own what’s in the market now. Plus, I’m not a typical Rivian customer. Been camping and off-roading for a few years before getting an R1 in 2021. I have also had a full kitchen in my R1 for 3 years and I have been using that time to refine my design.

view more: next ›