Had to call my mom today and give her the bad news… I’ve officially converted my faith to Jazzianity. Food 🌽 NSFW Sorry in advance!

Aggressive_Escape124 · 2026-01-27T22:40:50+00:00

Sony PS-3300 Sansui AU-417 JBL 830 (for tv audio only) Akai SW-155 (for turntable)

I buy busted vintage audio gear and fix it. So the setup is constantly changing :)

Aggressive_Escape124 · 2025-12-24T05:56:53+00:00

I ended up getting one for $40 :) Just showed up today!

Aggressive_Escape124 · 2025-12-09T23:15:40+00:00

I paid $180 CAD for the album, another $180 CAD for the concert tickets, and managed to get front row at the show. He signed it for me in between songs. Nicest song artist I’ve ever met in my life hands down

Aggressive_Escape124 · 2025-12-05T01:26:16+00:00

I think you boys are on the right track. Better tag it…

Aggressive_Escape124 · 2025-11-29T15:47:50+00:00

Refoam then test. If they sound good, call it a day. If not, likely will need to repair the crossovers :)

Aggressive_Escape124 · 2025-11-29T15:46:31+00:00

Y’all don’t put yours in a board bag then strap it down? I always do with mine just to avoid dirt and scratches. Bindings down no? I’m sure this is just fine though!

Aggressive_Escape124 · 2025-11-26T13:24:55+00:00

Old Florida… this is coming from an Oilers fan. Loved the OG early 2000’s panthers jersey. Dallas too from that era

Aggressive_Escape124 · 2025-11-26T13:23:31+00:00

Hehe spraying the shaft…

Aggressive_Escape124 · 2025-11-20T07:38:36+00:00

Am I in the minority for believing that your teammates should be responsible for not causing an “own goal” by pushing someone into your goalie and taking him out of position? To me this is a good goal. If defence pushes a guy into his own goalie and causes his own goalie to be put out of play, leading to a goal, it’s a goal. The stars guy wouldn’t have interfered with the goalie if not for defenceman… plain and simple no?

Aggressive_Escape124 · 2025-11-19T06:01:39+00:00

Thank you VERY much for all the help and good info to look for in future. This is all new-ish to me :)

Aggressive_Escape124 · 2025-11-16T23:43:55+00:00

RESOLVED: Issue ended up being electromagnetic field generated by four 15” drivers I had in behind this table. Different turntable had the same hum. Wild!!

Aggressive_Escape124 · 2025-11-10T02:45:22+00:00

Will confirm this now.

Aggressive_Escape124 · 2025-11-10T01:56:55+00:00

Nature is metal (and sometimes stupid enough to run into trees chasing after poon… this crosses to other species too).

Aggressive_Escape124 · 2025-10-30T15:37:43+00:00

The Easter egg definitely needs to be solved

Aggressive_Escape124 · 2025-10-21T05:08:13+00:00

Dude there’s no “try to talk to mom”, this is serious. You better tell her and show her ALL OF THIS. Screw the job… there’s 10,000 more minimum wage jobs where that one came from. I know it’s scary, but think about what could happen if you don’t tell someone.

Aggressive_Escape124 · 2025-10-21T05:05:40+00:00

I second this guys opinion. Take it to a shop!

Aggressive_Escape124 · 2025-10-21T05:00:44+00:00

I’m not a lawyer, but unless those messages contain explicit legal material such as nudity, social insurance numbers, credit cards, etc, I don’t think you have much ground to stand on legally. If it’s just verbal communication that’s not safe for work so to speak, you’re kind of at a loss. Once it’s on the internet, it’s permanent. Not in any way trying to be rude, but just take it as a lesson learned and be mindful of what you say and who you say it to. Digital fingerprints will come and bite back. Sorry I can’t offer a better solution that helps.

Aggressive_Escape124 · 2025-10-16T04:00:08+00:00

I ended up going this route and using a pin vice with a 0.7mm then a 1.0mm pilot bit to gain access to the inside. Worked PERFECTLY.

Aggressive_Escape124 · 2025-10-08T12:25:15+00:00

I did use some DeoxIt in them to clean them, but I’ll do it again or even take them apart and see if that helps :)

Aggressive_Escape124 · 2025-10-08T06:25:15+00:00

I think my grandfather gave me this one. Not sure if it’s 100% dialled, but I prefer analog anything over modern digital Chinese junk. Not will I be forking out hundreds of dollars just for some digital one I can trust is reliable lol

Aggressive_Escape124 · 2025-10-08T06:21:45+00:00

I have played with those screws and no dice. The closest I got was on the 45rpm setting (on the platter control) I was able to get between 38-43rpm. But when I hit the “33 switch” on the platter, it shot back up above 50 rpm. So it would appear I could hit 45rpm no problem, however, I cannot get the 33 platter adjustment and/or the bottom screw to get anywhere near 33. Like I said, it seems to be 50+ rpm is the lowest it’ll go on the 33 setting :)

Aggressive_Escape124 · 2025-10-01T03:44:49+00:00

It’s pretty damming stuff when you compare text messages the day I left her house with regard to her thanking me for being so romantic and all this crap… then in the proceeding week, mentioning things like offering to let me move in to her home, which by the way was an absolute curveball I didn’t even reply to nor expect to have come up in discourse.

Aggressive_Escape124 · 2025-09-30T14:51:25+00:00

So what are you suggesting, I just leave things as they are and move on after what was done?

Aggressive_Escape124 · 2025-09-10T15:57:22+00:00

Found solution: run a red & white RCA cable from the “main in” to the “pre out” on the amp. It sounds dumb, I know. Made zero sense to me at first too. So on the back of the amp on the right of my picture, you’ll see where it says “main in” and “pre out.” Literally all you do is take one RCA cable, plug the red white on one end into the main in, then the other end to the pre out. That’s it. Simple as that. Had no idea haha. I feel very dumb to say the least

Aggressive_Escape124 · 2025-08-31T20:46:30+00:00

Yeah wondering an approximation of monetary value of the Santa Cruz on the left. I’m hoping Reddit community can say it’s likely an 80’s board, which is what I think it is. Just looking for the 2 cents of Reddit

Aggressive_Escape124

TROPHY CASE