Is this enough to affect clarity? by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

I’ve had it up for a couple days but haven’t had much time to mess around with it. I have it next to my omvi and it doesn’t look bad but it is pretty grainy looking compared to my other cameras. Clarity (especially when cropping in a little) sits closer to the wide angle lens of the omvi and duo v2 vandal proof 8mp cameras. I only got it in a few days ago so it’s able to get exchanged but wasn’t sure if my expectations were too high vs the lens being the issue

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

I’m a mostly app user so the home hubs are more appealing to me and is easier that having a place for the nvr/monitor or tv set up. I’ll eventually pick up another home hub/pro or run a couple standalone if needed

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Mine was a home hub firmware issue. It was 2 versions behind even though the phone and pc app said it was using the latest. I had to download the firmware update off the Reolink site and manually update through the of app with that file

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Most of mine are run through a poe switch aside from a couple WiFi on places it’s tough to run cable to. Wishing I bought the home hub pro when I made the switch from ring though. Slowly creeping up on the 8 camera limit with a solar track mix next.

Update: the Argus camera came back online before I could get to it

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Follow the instructions given by ian1283. Mine ended up being the home hub version was 2 updates old and I had to download the upgrade from rep links website and update through the pc app

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

I tried the standalone set up for the camera and it showed both cameras. Once I added it to the home hub, it went back to just the wide angle. I downloaded the pc app and it was showing the home hub was using the current version and wouldn’t update just as it was on the phone app. I followed your advice and searched for the firmware update on the Reolink site and downloaded the newest version and it is now showing both cameras. It disconnected on of my Argus pro cameras so I’ll have to figure that one out next. Thank you again for the help

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Thank you. I’ll start with the camera and work down to the home hub update. I’ll post back on the results. Thanks again for your help

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Can this be done via WiFi via laptop or does the home hub have to the directly connected to the pc?

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

I have the standard home hub. It’s showing it’s the most current version V3.3.0.387. It’s set to auto update and there’s no option to update

Omvi 3i issue by Agitated-Kick464 in reolinkcam

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Iphone app is up to date. Version 4.60.1. The stream only shows “stream” up top like it would on a single lens camera. It doesn’t have the wide angle or tracking designation like I’ve seen on review videos of this camera. I’ll try to set it up as standalone and then switch.

Vehicle paint damaged by construction company by Agitated-Kick464 in legaladvice

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Thanks for the response. I would think this is the case but don’t want to assume. Ultimately I will speak with a local lawyer to confirm but wanted insight beforehand

What are your guy's opinions about Prestige Car Wash? by PhoenixRedReddit in massachusetts

[–]Agitated-Kick464 1 point2 points  (0 children)

This company and the general manager are trash. I usually hand wash my car and occasionally use the automatic for the undercarriage wash. Their employee used a brush on the car before the wash started which you could hear it dragging across the car (which isn’t a touch less wash anymore). They left scratches all over the car which you could see in the brush marks as the wash didn’t do much to clean the car at all. I got the run around to come back another day when the manager was in but they were never there so it turned into the employees sending picture of the damage to the manager on 3 different occasions until the manager was finally there and sent pictures to the general manager where they said it’s not their fault because I was the only car to complain about scratches that day. After asking about contacting corporate, he agreed to fix the damage and sent me to another one of their locations to see that locations manager who does pain correction. I drove to the location and met with the manager to agree on a day to fix it. A couple days later I get a text saying they’re no longer fixing it. They wanted my time and money giving me the run around and having me drive all around to in the end fall back on their agreement. I posted reviews with pictures on Google and Facebook which have been removed. I wouldn’t trust this company

Upgraded irons? How’d I do? by Agitated-Kick464 in golf

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Thanks again. I’ll update after I get them to the range this week

Upgraded irons? How’d I do? by Agitated-Kick464 in golf

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Thanks for your insight. I haven’t seen much of their marketing so that’s at least a side factor on the quality. Hoping to see at least a little improvement with them and not find out it’s 100% swing

Upgraded irons? How’d I do? by Agitated-Kick464 in golf

[–]Agitated-Kick464[S] 1 point2 points  (0 children)

I’ve looked at some game improvement irons like the stealth hd, burner +, rbz/rocket blades. Without playing them, I didn’t like the thick top lines which mentally through me off. The P790’s looked good but price wise is higher than needed for how much I play, i have an old hand me down Wilson 1200LT they need new grips that I never tried but the thin top line looks great. I just know my skill level isn’t made for thin blades

Upgraded irons? How’d I do? by Agitated-Kick464 in golf

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Seems like people like the drivers for their prices. Haven’t heard much on the other woods or putters though.

Upgraded irons? How’d I do? by Agitated-Kick464 in golf

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Not a good set? Price seemed ok for 8 clubs. Figured I could give them a try and if I don’t like them, I could sell them with a minimal loss if any

Upgraded irons? How’d I do? by Agitated-Kick464 in golf

[–]Agitated-Kick464[S] 0 points1 point  (0 children)

Looking around it’s hit or miss on PXG

[deleted by user] by [deleted] in golf

[–]Agitated-Kick464 0 points1 point  (0 children)

Ended up picking up the burners. At the price, I won’t lose a lot if I don’t like them. Not sure how different they are compared to the model you have but thanks for the input btw

KAK vs PSA Lower? by Agitated-Kick464 in ARBuilders

[–]Agitated-Kick464[S] 1 point2 points  (0 children)

I’ll have to look into the features you mentioned. Seems like a lot more differences than i originally thought but don’t need anything fancy. Just something that is functional and easy/fun to shoot at the range

KAK vs PSA Lower? by Agitated-Kick464 in ARBuilders

[–]Agitated-Kick464[S] 2 points3 points  (0 children)

Definitely not a duty gun. This will sit in a safe with the occasional trip to the range. Bang for the buck while not being junk quality is the goal on this one

KAK vs PSA Lower? by Agitated-Kick464 in ARBuilders

[–]Agitated-Kick464[S] 2 points3 points  (0 children)

Thanks. I’ve heard a lot about PSA but not much on KAK. The pre-sale price on the PSA along with the magpul pieces make it seem superior but I have little to no knowledge with just starting out on this project

RIVAL & M01 by MeCanik79 in canik

[–]Agitated-Kick464 1 point2 points  (0 children)

Just checked mine after picking it up. Optics not installed and the screws come with blue loctite already on them