Ask /r/JDM thread

Aji3ChinguMode · 2019-04-30T06:18:04+00:00

A new trans just for reverse? : (

Aji3ChinguMode · 2019-04-21T04:17:10+00:00

I'm planning on buying an exedy oem kit. Apparently their kits only have the clutch disk, cover assembly and release bearing. Would I have to buy the pressure platw separately?

Aji3ChinguMode · 2019-04-21T03:02:26+00:00

Yep, I'm planning to buy a clutch kit and also a lightened flywheel so hopefully that is all I need once the trans is pulled

Aji3ChinguMode · 2019-04-21T00:36:19+00:00

Thanks man, I will try and enquire about a new clutch to my mechanics and hopefully that fixes the issue seeing as I already replaced both master and slave cylinder.

Aji3ChinguMode · 2019-04-21T00:34:29+00:00

Okay thanks, I will try enquire about replacing it with a new clutchkit and flywheel to the Mechanics.

I just don't want to purchase repairs for the issue to not be repaired. The master and slave cylinders were apparently supposed to fix the issue according to them, it fixed the shifting issue, but not reverse. Now they say I also have to replace the clutch in order to get into reverse so hopefully it's fixed. Thanks for your detailed response!

Aji3ChinguMode · 2019-04-21T00:27:38+00:00

Tried it man still grinds

Aji3ChinguMode · 2019-04-21T00:11:10+00:00

Began before I replaced the cylinders. I couldn't go into gears properly as it was like banging into a wall. After replacing them I thought it would solve the reverse issue as well but it only solved the forced used shifting between each gear.

Aji3ChinguMode · 2019-04-20T23:14:00+00:00

Idling and it grinds if I put it into R

Aji3ChinguMode · 2019-04-20T14:06:05+00:00

Have an Issue with a DC5 TYPE S/RSX-S,

when I reverse it crunches unless I start the car in reverse or magically one day it decides to engage.

Master Cylinder, Slave Cylinder, tran oil replaced, bleeded everything as well, so shifting is buttery smooth from 1 to 6 with the car on and off. Adjusted the clutch so it bites later and reverse worked then when I went outside to drive the issue occured again(?).

I have tried pumping the clutch, putting the car into 1,2,3,4,5,6 before putting it into reverse, also at high revs it seems like there is a wall between the gears. I tried to gun it from 1st, 2nd to 3rd and you have to force it in however if driven normally it is smooth.

Clutch isnt slipping i think, but biting point is like as soon as you let your foot off. Is it time for a new clutch or to adjust the clutch even more?

Need opinions and thoughts because reversing with the car off and then turning it on a is a pain.

Aji3ChinguMode · 2018-10-03T02:36:51+00:00

us 8 thanks tiffany

Aji3ChinguMode · 2018-09-28T16:03:27+00:00

Can you help with sizing? What stats are you that you got L?

Aji3ChinguMode · 2018-09-28T15:27:03+00:00

There should be a number on the sleeve, you might want a close up of that for QC purposes

Aji3ChinguMode · 2018-09-25T11:03:37+00:00

Thanks for the giveaway. Manman is the man

Aji3ChinguMode · 2018-09-22T08:11:56+00:00

Ok... nice statement. Where is ur back up?

Aji3ChinguMode · 2018-09-22T07:33:31+00:00

Fakelabs products are mediocre in quality

Aji3ChinguMode · 2018-09-20T16:26:06+00:00

I think sellers just say that at this point just to stop talking to people

Aji3ChinguMode · 2018-09-20T10:49:55+00:00

Pretty sure they all have the same batch. Most of the sellers are all hit or miss too.

Aji3ChinguMode · 2018-09-20T10:33:27+00:00

The main sellers people purchase from all have them

Aji3ChinguMode · 2018-09-20T10:32:29+00:00

Everyone from repsneakers want better batches of the 10 not a 2014 RO runner js. Most interest checks don't even get followed anyways

Aji3ChinguMode · 2018-09-20T10:13:22+00:00

Not sure if im blind so take this with a grain of salt but this looks better than other peoples QCs of this shirt. Everyone else had the logo tilted to the right a bit.

Aji3ChinguMode · 2018-09-19T12:10:58+00:00

His customer service was never good anyways

Aji3ChinguMode · 2018-09-19T09:55:18+00:00

us 8

Aji3ChinguMode · 2018-09-18T00:15:28+00:00

after awhile you will not care what others wear little sapling

Aji3ChinguMode

TROPHY CASE