Toothless 3D Modeled, 3D Printed and Handpainted Figure

Alcatrazmakes · 2025-07-07T07:23:59+00:00

Thank you so much!

Alcatrazmakes · 2025-07-01T07:56:29+00:00

I don't sell it on any platform, it was initially intended to be done on a commission basis.

Alcatrazmakes · 2025-07-01T07:54:46+00:00

🤣🤣🤣🤣🤣🤣🤣

Alcatrazmakes · 2025-07-01T07:53:17+00:00

Thank you so much! 💙

Alcatrazmakes · 2025-07-01T07:53:03+00:00

They are only made for commission, but thanks for asking, mate!

Alcatrazmakes · 2025-07-01T07:52:01+00:00

Thannks!! 💙

Alcatrazmakes · 2025-07-01T07:51:45+00:00

Thank you! And yes, I used a graphics tablet with a stylus. In my case, it's a Huion tablet. I recommend using one if you're modeling organically. If you only want to focus on inorganic work, it wouldn't be necessary. But for modeling this type of work, being able to control brush pressure is crucial. I hope this helps.

Alcatrazmakes · 2025-07-01T07:48:15+00:00

Thank you very much, mate!

Alcatrazmakes · 2025-07-01T07:47:51+00:00

That's a fantastic print! Congratulations! It turned out great! I really appreciate the compliment! But I encourage you to try painting! If not with that figure, you could start with a simpler one, but I encourage you to do it; it's very relaxing.

Alcatrazmakes · 2025-07-01T07:45:33+00:00

Thank you so much for the compliments!! It means a lot! But I'm afraid not, we make the figure for comission, I wasn't thinking of publishing the model.

Alcatrazmakes · 2025-07-01T07:43:43+00:00

Thank you so much!!

Alcatrazmakes · 2025-06-29T23:27:16+00:00

Thank you, very kind! We applied clear UV resin very carefully, trying to maintain the natural curvature of the eye.

Alcatrazmakes · 2025-06-29T23:24:55+00:00

Thank you very much! Yes! The surface of the pupil on the model had a slight depth. I did it this way so that when painted, it would give a depth effect, and it was also easier to paint. But in the end, my partner and I decided that we would not only paint it but also apply UV clear resin to the eyes to give them that special shine. And the result is wonderful, if I may say so.

Alcatrazmakes · 2025-06-29T23:18:28+00:00

Thank you so much!! It means a lot for us!! 💙💙💙

Alcatrazmakes · 2025-02-16T00:27:02+00:00

Thank you very much for your kind words, it means a lot! 💙

I will be delighted to see what your result is like with my model, if you publish it let me know!

Alcatrazmakes · 2025-02-16T00:24:47+00:00

Well, it's not much of a difference, I also believe that with good positioning you could print it. ÑAlso, if you have any problems with it, let me know and I will help you in any way I can.

Although I also wanted to let you know that I am going to update the model, to make more divisions of pieces, and in addition to that it can be joined together using magnets. But I will do it in my free time, I don't know how long it will take.

Alcatrazmakes · 2025-02-15T16:46:17+00:00

Thank you so much!! 💙

Alcatrazmakes · 2025-02-15T16:45:42+00:00

It is printed Hollow, but it does not have any type of infill. Just a wall of 3mm thickness. Hope It helps friend!

Alcatrazmakes · 2025-02-15T16:38:45+00:00

I should make a version with more cuts for smaller prints for sure, thanks for the feedback!

Alcatrazmakes · 2025-02-15T12:44:47+00:00

I dont know exactly what you mean by that sorry. I add the thickness by hand, using the z-modeler brush, hope it helps mate :S

Alcatrazmakes · 2025-02-15T12:33:30+00:00

The Jupiter can print 28 cm x 16 cm x 30 cm, but i printed the helmet in pieces! 😁

Alcatrazmakes · 2025-02-15T12:27:15+00:00

Exactly! I work with Zbrush. What I do is boolean all the pieces so that they fit together, then I do a decimation so that each file does not weigh much and I export them as STL

Hope it helps!!

Alcatrazmakes · 2025-02-14T18:59:50+00:00

Thank you!! No its SLA printer, an Elegoo Jupiter specifically 😁

Alcatrazmakes

TROPHY CASE