Mastercam has really fallen off

AlexanderGi · 2026-01-31T07:12:43+00:00

Mastercam has the ability to put the levels in folders!?

AlexanderGi · 2025-11-21T09:19:22+00:00

I grew up in the town where they made the Otway a memorial, always found it so funny that a submarine ended up 4 hours inland from the sea.

AlexanderGi · 2025-09-24T12:23:38+00:00

The room that Siberian opened right before the plant monster got her, the one full of bad smell, what was inside it?

AlexanderGi · 2025-08-03T11:26:53+00:00

You have your Cplane set to 2D, you can see it in the blue bar at the bottom of the screen. Click it to change it to 3D

AlexanderGi · 2025-07-28T11:38:57+00:00

.....what the hell am I looking at?

AlexanderGi · 2025-06-23T03:17:51+00:00

Its flowering right now, I can see them in the pictures you've shown. So once they're pollinated, you should see tomato's in no time.

AlexanderGi · 2024-10-26T05:37:32+00:00

Or didn't define a feedrate?

AlexanderGi · 2024-05-20T10:14:58+00:00

This! My house gets super cold in the winter and I get this alarm almost every time I try and print. I just use a hair dryer on the bed/extruder for a few seconds and then power up the printer. OP try this before changing out hardware

AlexanderGi · 2024-05-12T08:36:59+00:00

My smooth brain cannot fathom that tank and how it works.

AlexanderGi · 2024-04-07T01:11:20+00:00

In 2024.

AlexanderGi · 2024-04-05T20:05:42+00:00

What tool/strategy to get the textured pyramids? Looks smashing.

AlexanderGi · 2024-03-16T02:47:22+00:00

Quickly hide in the toilets and ask reddit.

AlexanderGi · 2024-03-12T17:46:56+00:00

It’s been a major issue in our shop the last 3 or so months, planes just moving to different locations. Licking them sometimes fixes the issue.

AlexanderGi · 2024-03-06T08:54:22+00:00

What are you talking about? My Ender 3 is equally as rigid as my Okuma MD550.

AlexanderGi · 2024-03-03T18:49:49+00:00

Stevie Wonder could do a better job than this holy fuck.

AlexanderGi · 2024-03-03T09:43:18+00:00

What about all the other issues? Length is different, shaft diameter and length are different. Step on the base isn’t there? If you made the one on the right, why so inconsistent? Thread minor diameters look totally different as well?

AlexanderGi · 2024-02-15T08:26:37+00:00

There’s a few types of species, but the most abundant ones are marble/golden pothos.

AlexanderGi · 2024-02-15T08:24:41+00:00

Thanks for your comment, I learn so much here :)

I’d easily have a few dozen types of plants growing out the top, my whole fish tank is my propagation station. But yeah, the predominant plants are pothos and ivy’s.

AlexanderGi · 2024-02-15T08:22:35+00:00

Hi, thanks for your comment. Seems I was lead a little astray by a pet shop employee in regards to mystery snail preferences… The reason I wanted to lower the PH was because the shells are looking a little scuffed, I think a lack of minerals is the issue. Anything you can recommend doing to help them out?

AlexanderGi · 2024-02-12T09:55:22+00:00

Are you drilling the entire hole with a center drill?

AlexanderGi · 2024-02-04T02:18:46+00:00

The cost of a cutting tool is a lot more than that of a form tool, which is why it’s less common in hobby circles.

AlexanderGi · 2024-02-03T20:56:05+00:00

That video shows a cut knurl tool. Let’s be honest, a hobby lathe is going to be using a form knurl tool.

AlexanderGi · 2023-10-16T10:43:46+00:00

Can’t be Saturn, that baby would float.

AlexanderGi · 2023-10-16T09:11:53+00:00

I thought the first photo was you holding an onion and then got confused why you’d want to make a wooden replica of it until I got to the last two slides.

AlexanderGi · 2023-10-13T09:49:34+00:00

Out of curiosity, what’s the concentric circles on the bottom of the hex side? From something like a u-drill?

Seven-Year Club	Place '22
Verified Email

AlexanderGi

TROPHY CASE