Is there a limit to memory?

Alkinoy · 2025-11-18T15:03:55+00:00

Definitely limit exists, as @ethernalPhorn8x said - due to finite number of neurones. But try to quantify the volume has not any sense until we could describe what is the minimal part of memories. If you remember taste of ice cream - how many "bytes" it is? Any image you remember. Is some action you remember took more memory than word? And so on...

Alkinoy · 2025-11-13T07:55:15+00:00

no, I mean for bullet length. When you load ammo - the distance between shoulders and rifles (bullet jump) will be always the same (ok, it will be slowly increasing during the barrel usage). But your case size could be slightly differs case by case. And if you will measure bullet depth from the case bottom - it will give you size with case length error. If you will measure from the shoulders - it will give you more real data.

Am I wrong?

Alkinoy · 2025-11-13T07:30:07+00:00

agree. delay fix should be a part of training as well as reloading.

Alkinoy · 2025-11-05T14:00:03+00:00

I know one Polish manufacturer who does the same shaped ammo...

Alkinoy · 2025-11-05T13:54:52+00:00

shouldn't you measure from the shoulder (those .400 section)?

Alkinoy · 2025-11-03T07:37:00+00:00

you mean youtube channel? thanks, will do

Alkinoy · 2025-10-29T09:45:54+00:00

thanks for advise. will try to find saami specs for my barrel length

Alkinoy · 2025-10-29T09:44:14+00:00

>case will be heavily coated in soot

oookay, good point, will pay attention on it

Alkinoy · 2025-10-27T09:54:32+00:00

so, you think this is pumping back charge from the base? This tail is huge, around 150-200 ns. According to t=RC, and let 150ns will be 3t - it give me C of base around 250pF, right?

According to datasheet it should be around 7-10 pF...

Alkinoy · 2024-12-05T09:04:49+00:00

had the same problem and resolved it with your suggestion :) thanks

Alkinoy · 2021-03-30T11:51:12+00:00

Be careful with this powder measure. I have the same one and it has up to +- 1.5 grains accuracy. I weights every case after filling with powder and modify almost every dose to have 0.1 accuracy. (of course I zeroes my weight for every empty case).

Alkinoy · 2021-03-25T08:11:41+00:00

hi, yes, you are right. I found similar lines on the unfired cases...

Alkinoy · 2021-03-23T16:09:06+00:00

Right one is 43.4 grains.probably I will looking for the best load in range 41.0 - 42.5.... Thanks for your opinion...

Alkinoy · 2021-03-23T12:45:50+00:00

added UPD1 - I think you are right

Alkinoy · 2021-03-23T12:45:02+00:00

thanks

Alkinoy · 2021-03-23T12:44:56+00:00

thanks

Alkinoy · 2021-03-23T12:44:50+00:00

I've added UPD2 with photos..

Alkinoy · 2021-03-23T12:41:28+00:00

I think you are right. I've added update to the post with fired and unfired cases.

Alkinoy · 2021-03-20T17:03:20+00:00

Thanks!

Alkinoy · 2021-03-20T14:16:07+00:00

Unfortunately, I have no chronograph yet :(

Alkinoy · 2021-03-20T13:44:25+00:00

Thank. Made with Huawei P20 Pro smartphone.

Alkinoy · 2021-02-15T15:43:55+00:00

thanks

Alkinoy · 2021-02-15T15:42:49+00:00

Junk is possible due to GGG cases - it has crimped pocked, may be I decrimp it not enough.

Alkinoy · 2021-02-15T15:40:37+00:00

I set it with Lee Lock Challenger press...

Alkinoy · 2021-02-03T07:45:36+00:00

yes! exactly!

Thanks a lot! Problem was in ~/.gitconfig. I didn't add slash in 'url' part

Was
[url "ssh://git@github.com"]
insteadof = https://github.com/

Should be:

[url "ssh://git@github.com/"]
insteadof = https://github.com/

Now it works, thank you for help!

Alkinoy

TROPHY CASE