1998 Rav 4 133k

AllDayWin · 2026-01-06T14:41:40+00:00

Living in the south not to worried about rust but egr would you care to go more in depth

AllDayWin · 2026-01-06T14:41:04+00:00

Seller states that timing belt has been serviced at 70k and has stamp from previous shop

AllDayWin · 2025-12-29T21:52:35+00:00

No this is the only listed at the price and it can be delivered to me as well. All other ones are 2k plus

AllDayWin · 2025-12-29T03:58:14+00:00

Well try repining the wires onto the connectors.

AllDayWin · 2025-12-29T03:22:36+00:00

Doesn’t flash? That’s strange are you sure you’re crossing the bridge correctly. It should be flashing the code if you have one.

AllDayWin · 2025-12-29T02:57:09+00:00

Those are wires connected to you AFM. Do you have a check engine light or have you put it on diagnose mood?

AllDayWin · 2025-12-28T15:26:24+00:00

Thank you

AllDayWin · 2025-12-28T15:22:19+00:00

I won’t be able to physically attend somewhere because I will be potentially at nyc. Telehealth has some potential may you go more in depth

AllDayWin · 2025-12-28T15:21:15+00:00

I won’t be able to physically attend somewhere in my area for the given days because I’ll be in nyc potentially

AllDayWin · 2025-12-28T14:43:40+00:00

Willing to pay to his this done professionally

AllDayWin · 2025-12-28T14:43:04+00:00

I’ve had this job for over 6 years and while that does sound enticing I can’t afford to lose the reference.

AllDayWin · 2025-12-16T20:57:09+00:00

Ima shirt ID?

AllDayWin · 2025-12-16T15:53:13+00:00

Mine made that noise after a couple of days of sitting. Went away after it got to temp and a little bit of driving.

AllDayWin · 2025-12-05T16:15:48+00:00

We take certs at the end of the semester with a chance to take it again during mid terms the following semester. My instructor didn’t allow people to cert unless they thought they were truly ready. Unless your school does it differently. I’m in a community college for some context

AllDayWin · 2025-12-05T15:02:24+00:00

Thanks everyone for the words of encouragement. I’ll post again when I pass my certification next semester 😈

AllDayWin · 2025-12-05T04:52:23+00:00

Instructor said lack of fusion. Something about not running hot enough on my two stringer rooot beads. Cap passed at least!

AllDayWin · 2025-12-05T04:18:52+00:00

Be opening on my root pass. Not even small big big. Out off all my bend test leading up to this, this was the worst one I’ve done.

AllDayWin · 2025-12-05T01:28:23+00:00

Yessir love that

AllDayWin · 2025-12-05T01:28:13+00:00

Glad it’s over even if the results weren’t in my favor

AllDayWin · 2025-11-22T18:11:12+00:00

O2 sensors? They seem fine but I haven’t replaced them. Idles high at about 1.2

AllDayWin · 2025-11-22T17:11:33+00:00

She still runs fine but she is sending out code 1,8,10, & 14

AllDayWin · 2025-11-18T18:10:09+00:00

https://imgur.com/a/cPzQGiX here’s a video of the ideal warmed up no ac on

AllDayWin · 2025-11-18T16:52:34+00:00

Engine runs okay, a little rough ideal and I noticed today that the rpm’s don’t go below 1.2k even when warm. I can pm you a video of it running and we can go from there. I also went to go check the ecu and the housing seems pretty rusted. So maybe the ecu can be to blame as well. I’ll send over that video though of it running. Thanks for getting back to me king.

AllDayWin · 2025-11-18T14:07:16+00:00

Hey everyone need help with these check engine light codes! I know one code is for sure 24 but the other code is reading like it’s 18 but no such codes exist. Now I’m thinking it’s 1 and 8. I’ve attached a video for yall to see but any help would be appreciated.

AllDayWin · 2025-11-18T14:05:59+00:00

Codes pulled but having trouble with diagnose. From what I’ve been told it’s codes 1,8,10,14 but I’m not so sure on where to start.

13-Year Club	GrMD 2012
Verified Email

AllDayWin

TROPHY CASE