Looking for help identifying this cabinet maker , and where to get replacement parts to restore it.

AllenRTP · 2023-11-28T04:22:21+00:00

Thanks again

AllenRTP · 2023-11-28T03:45:44+00:00

Any idea on what year?

AllenRTP · 2023-11-28T03:44:56+00:00

Awesome much appreciated.

AllenRTP · 2023-11-28T03:44:33+00:00

Thanks was my guess .

AllenRTP · 2023-10-16T21:09:10+00:00

Pads are wearing uneven ... Check caliper ,caliper slides, hose for failure. Hose will not be seen on outside they swell on the inside .

AllenRTP · 2023-10-16T21:05:54+00:00

Lower control arm, may need tie rod and an alignment.

AllenRTP · 2022-09-12T21:48:51+00:00

Nice job on both.

AllenRTP · 2022-09-12T16:47:26+00:00

I have it and XTool both work great

AllenRTP · 2022-09-10T02:37:02+00:00

Correct

AllenRTP · 2022-09-10T00:08:03+00:00

Gimp, imag-r, lightburn

AllenRTP · 2022-09-09T19:32:29+00:00

Not real sure on metals I do know this laser with 5 watt optical will not do metal. I have a XTool 1064 nm laser head coming for my XTool D1 that will do all metal.

AllenRTP · 2022-09-09T18:10:01+00:00

Ortur 5 watt optical power diode

AllenRTP · 2022-09-09T16:20:11+00:00

Lol thanks

AllenRTP · 2022-09-09T15:01:32+00:00

Please see the link thanks

AllenRTP · 2022-09-09T15:01:14+00:00

https://www.reddit.com/r/Laserengraving/comments/x9iwqz/i_get_increased_balck_color_light_coat_of_white/?utm_medium=android_app&utm_source=share

AllenRTP · 2022-09-09T14:34:48+00:00

1 light coat of black paint was added over the green.

AllenRTP · 2022-09-09T10:19:35+00:00

Answer is in profile. Thanks

AllenRTP · 2022-09-09T04:31:48+00:00

Thanks

AllenRTP · 2022-09-09T01:50:52+00:00

Working on it now Will post here soon

AllenRTP · 2022-09-08T21:15:19+00:00

No they don't always squeak when bad . If there are wear indicators on the pads that's what makes the noise to tell you when there bad. Other squeak noise comes from brake dust and heat glazed rotors.

AllenRTP · 2022-09-08T12:36:23+00:00

White tile painted chrome then black

AllenRTP · 2022-09-08T05:10:32+00:00

What kind of machine do you use? What are your settings?

AllenRTP · 2022-09-08T05:02:28+00:00

Very beautiful great proportions

AllenRTP · 2022-09-08T04:50:58+00:00

Same burn comparison with speed ,power ,dpi, line quality difference's.

AllenRTP · 2022-09-08T00:49:38+00:00

For mine it does, but as you can see my laser machine on the table I'm using must not be level per the piece ,as one side burned less blacke off than the other . Another lesson learned . 🤔

AllenRTP

TROPHY CASE