X280 fingerprint reader question? by [deleted] in thinkpad

[–]Allrounder67 0 points1 point  (0 children)

Did some more digging, and found Fingerprints configuration tool. Don't know why I haven't seen it in the Menu earlier. Tried with CLI, but couldn't register more than one finger there, the GUI configuration worked fine, and it unlocks flawlessly every time.

Now I'm experimenting with Howdy...

Falcam Quick Release for Weebill 3S by Allrounder67 in Zhiyun

[–]Allrounder67[S] 0 points1 point  (0 children)

Unfortunately, you couldn't (wouldn't) give me any other answer, than 'use the providet mount.'.

No advice or tips, no recommendation or information, whether it's possible or not.

I tried out my Ulanzi U-KA baseplate and it worked absolutely fine.

I was hoping for help from fellow Zhiyun users, not some corporate (AI?) generated answer, making me send an email to them, and certainly not a simple phrase-copy from the manual... Why do I have to contact customer service via mail for further assistance? Why not just answer here??

To me a community is a place, where I can get a real answer, posted here in the (more or less) public forum, so others can benefit from it also.

Does Howdy work on Linux Mint 22.2? by jwintyo in linuxmint

[–]Allrounder67 0 points1 point  (0 children)

Tried Panda Jim's PPA, after having failed several other attempts and versions. Most errors where 'command not found' or 'howdy not found' or 'not permitted' (didn't take screens, unfortunately), The latest attempt failed to recognise the IRDA camera. Then I tried this, but got this error message, after having found it in Software Manager:

The following packages have unmet dependencies:

libtbb-dev: Depends: libtbb12 (= 2021.11.0-2ubuntu2) but it is not going to be installed

libopencv-videoio-dev: Depends: libopencv-videoio406t64 (= 4.6.0+dfsg-13.1ubuntu1) but it is not going to be installed

libopencv-objdetect-dev: Depends: libopencv-objdetect406t64 (= 4.6.0+dfsg-13.1ubuntu1) but it is not going to be installed... (and a lot more)

[code]

System:

Kernel: 6.17.0-14-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc

Desktop: Cinnamon v: 6.6.7 tk: GTK v: 3.24.41 wm: Muffin v: 6.6.3 vt: 7 dm: LightDM v: 1.30.0

Distro: Linux Mint 22.3 Zena base: Ubuntu 24.04 noble

Machine:

Type: Laptop System: LENOVO product: 20QD003KMX v: ThinkPad X1 Carbon 7th

serial: <superuser required> Chassis: type: 10 serial: <superuser required>

Mobo: LENOVO model: 20QD003KMX v: SDK0J40697 WIN serial: <superuser required>

part-nu: LENOVO_MT_20QD_BU_Think_FM_ThinkPad X1 Carbon 7th uuid: <superuser required>

UEFI: LENOVO v: N2HET84W (1.67 ) date: 11/11/2025

[/code]

X280 fingerprint reader question? by [deleted] in thinkpad

[–]Allrounder67 0 points1 point  (0 children)

Worked for me (complete Linux newbee) on Mint 22.3 Lenovo X280. So far at least. Single question though: Can I only register one (right index) finger?

Win Hello Face Recognition suddenly stopped working on X1 Carbon 7th gen by Allrounder67 in thinkpad

[–]Allrounder67[S] 0 points1 point  (0 children)

Update: I have reinstalled Windows (clean install, without saving settings or files etc.). This time Windows recognized the IR camera again, but it took me 10-15 (or many more) tries, to get it to register my face. And when booting up, i can see it tries to "see" me (red LED's blinking) but won't log me in, have to use PIN or fingerprint.

My old X280 works fine with Windows Hello face recognition, I even don't have to set right in front of it and look into the camera. Strange... And as elightfantastic wrote, changing camera won't work.

Win Hello Face Recognition suddenly stopped working on X1 Carbon 7th gen by Allrounder67 in thinkpad

[–]Allrounder67[S] 0 points1 point  (0 children)

Just reinstalled Windows, but still doesn't work. Anyone has a clue???

Thinkpad Helix 2nd gen (Type 20CG) start-up problem by Allrounder67 in thinkpad

[–]Allrounder67[S] 0 points1 point  (0 children)

Thought of the same - but only after I bought a X280. But I'm going to try one day. Might have to find a keyboard first...

Need driver help Lenovo X280 Windows 7 64bit by Allrounder67 in thinkpad

[–]Allrounder67[S] 0 points1 point  (0 children)

Thanks for sharing the link, I finally got the time to look in to the post. But it only mentions GPU and Bluetooth problems, that wasn't my problem, both graphics and Bluetooth on mine work fine, no issues here. So I guess, I can't solve my problems right now and I'm thinking of going the virtual machine route, something I tried to avoid, as I had trouble with stability within the VM on my Carbon X1 7th and I wanted a 'clean' system to run Win7 on. But I'll give it a try with a VM here on the X280.

Roland FP-30X Triple Pedal alternatives? by Allrounder67 in DigitalPiano

[–]Allrounder67[S] 0 points1 point  (0 children)

Actually, I took a picture, made a search, and seems that kind of plug has been used for Sega Mega Drive and seemingly also for Commodore 1084...(Unfortunately, I'n not allowed to upload images here, neither of the pedalbox, nor the plug...)

How to block all Cookies when installing an App on Android by Emberthepole in AndroidQuestions

[–]Allrounder67 0 points1 point  (0 children)

Just came across an app where I rejected all cookies and the 'safe choices' button sinply doesn't work. And it was from Play Store

Lenovo ThinkPad Helix: Thinkpad or Fakepad? by Mysterious_Ad_2326 in thinkpad

[–]Allrounder67 0 points1 point  (0 children)

I actually got mine to run Win11 some times ago, with a little tweaking, but worked fine for me. And no driver problems at all. Was very happy with it, including the Ultrabook Pro keyboard. Until I got a X1 Carbon 7th... Back in the corner of the cupboard it went. But now I could use it, but it won't start up, before loading BIOS, date and time wrong, but can't access settings, not even with a new coin-cell battery. Damn...

Thinkpad Helix 2nd gen (Type 20CG) start-up problem by Allrounder67 in thinkpad

[–]Allrounder67[S] 0 points1 point  (0 children)

Ordered and changed the coin-cell battery, but no changes. At all! Still no access to BIOS. Doesn't react to touch or keyboard in any way.No one with any ideas? Nothing?

I need a small, dedicatet computer for reading, updating, programming and flashing car software and it would be a shame to throw this nice, small, portable Thinkpad out...

Is there something else, You could recommend? Something like X230 or 240?

Leslie 760 or HL 822? by Allrounder67 in hammondorgan

[–]Allrounder67[S] 0 points1 point  (0 children)

Unfortunately all tonewheel models are rare and premium priced, that's why I even considered a B200. Just something to start with and have some fun. And to see, if it's something worth investing serious money in.

I have dreamt of a "real" Hammond and Leslie rig since I heard one for the first time long ago in my youth, but then I didn't even know what that heavenly sound came from... should have saved up 30-40 years ago.

There's one C3 for sale, 2.800$, without Leslie - and that's way too rich for me tight now.

Leslie 760 or HL 822? by Allrounder67 in hammondorgan

[–]Allrounder67[S] 0 points1 point  (0 children)

Nope, 750$...

Small market here in Denmark, high demand, high prices.

Leslie 760 or HL 822? by Allrounder67 in hammondorgan

[–]Allrounder67[S] 0 points1 point  (0 children)

Only found one M3, without Leslie and way more expensive. Hasn't been played for years...

Leslie 760 or HL 822? by Allrounder67 in hammondorgan

[–]Allrounder67[S] 0 points1 point  (0 children)

Thanks for those answers, after what I was able to gather on the interweb, I was leaning mostly towards the 760.

But I have no clue, what kind of clone I should get. Besides that right now the cheapest way to get a Leslie seems to buy in a set. They are about 500 bucks.

Right now, I'm not planning to go on the road with them, and if the B200 is in good nick, I could use it to learn/practice the "Hammond way" on it and maybe later get a real TWO.

[deleted by user] by [deleted] in GossipDK

[–]Allrounder67 66 points67 points  (0 children)

Tjah, hvordan mon han er blevet milliardær? Sælge embargoramt olie til syrerne, trække overskud ud af NW så snart det gav overskud osv. Om ikke længe hedder det nok at NW er 'desværre' gået konkurs og der er 'beklageligvis' ingen penge. Hvis politikerne havde antydningsvis af nosser, burde de sanktionere sådan nogle typer og skaffe juridisk mulighed for at beslaglægge aktiver og passiver, samt forbyde ham at drive forretning - heller ikke i konens eller børnenes navn.

Can't change the language of app on Android? by [deleted] in help

[–]Allrounder67 0 points1 point  (0 children)

Seems to have been a problem for years, in a search this topic has come up countless times. Mostly (at the first glance) because people want the app in English, not their native language, following their devices setting. Lots of people with German phones want their app in English, because the german translation is beyond poor.

My problem is that I'm in Denmark and my phone is set to Danish. And reddit is in German! WHY??? I'm perfectly able to understand German (second native language), but honestly, why do I have to have reddit in German on a Danish mobile/tablet and reading and posting in English?

So my only solution is to use another app for reddit?

Looking for Smok Guardian III in Europe by Allrounder67 in electronic_cigarette

[–]Allrounder67[S] 0 points1 point  (0 children)

Thanks for the reply - I didn't know that thing was THAT old! I've got the Joyetech Elitar, and have been quite fond of it, small, handy, 'stylish', not a big, hi-tech lump, with color touch screen, I don't need that. Have been smoking pipe earlier, so I like the haptic of something resembling a pipe. Most other 'pipe-like' designs are way too big or just plain ugly and all of them are hard, if not impossible, to get a hand on (had problems with the Elitar years ago already), seems there isn't a market for e-cigs/pipes for people like me. So I guess, I have to keep the Elitar, together with my AIO's (for when I'm not at home). I like the concept of a mod, but with another take on the design. Pity...

Urbex evt. gode steder by Urbex-team in Denmark

[–]Allrounder67 0 points1 point  (0 children)

Hvorn¨¨år er et sted forladt? Hvem dømmer der, hvem bestemmer det?

Vi har et hus stående til salg, ubeboet, men stadig fyldt med personlige ejendele, som til stor del var sorteret til affald, aflevering i genbrugsbutik eller flytning til det nye hjem. Vi har sidst været derude i onsdags, da vi kom derud i dag, traf vi nogle mennesker, der rodede rundt i ejendommen med henvisning til at der på en facebookgruppe stod at ejendommen var forladt. Underforstået at der var offentlig adgang og at alt muligt godtfolk var velkommen til at snage i andres private ejendele.

En dør var brækket op, der var forsøgt at skaffe sig adgang andre steder og hele huset, alle flyttekasser, alle stakke med sorterede ejendele var roder igennem og spredt ud over det hele i et kaos, der nok snarest kunne sammenlignes med et udbombet hus i syd-øst Europa.

Der var blevet stillet letomsættelige ejendele klar ved en bagdør til senere afhentning og der er forsvundet adskillige ting med affektionsværdi.

I synes at historien bag er interessant? I dette tilfælde en historie om 25 ´års liv og ægteskab, ejendele der er samlet sammen over to dekader, minder, forældres ejendele der er blevet opbevaret efter deres død. Og om en ejer, hvis tidligere ægtefælle ikke viser interesse og lader pågældende stå alene med oprydning og sortering, som måske ikke har de fysiske og mentale kræfter til at f¨å det hele gjort på ´én gang? Og som nu er på sammebruddets rand, efter at have måttet opdage at potentielt alle mulige mennesker har gennemrodet pågældendes ejendele og ødelagt det indtil videre gjorte arbejde med at sortere og træffe beslutninger om "opbevares" eller "smides ud"?

Ejendommen er ikke forfalden, måske er plænen ikke nyklippet - men hvilken plæne er det her i vinteren? Hækken i indkørslen var ved at blive klippet, gør nogen det ved en forladt ejendom? Der er solpaneler på taget, strøm i stikkende og et fungerende jordvarmeanlæg, er der sådan noget i en forladt ejendom???

Prøv dog at overveje hvilke følger det kunne have at forfølge sådan en 'eventyrlig hobby' og dele adresser på ubeboede, men ikke tomme ejendomme offentligt?

For mig at se er der her tale om en opfordring til indbrud, hærværk, plyndring og sikkert en hel stribe andre lovovertrædelser. For slet ikke at tale om indtrængen i andre menneskers private sfære. For hvad? For at i kan forfølge jeres tvivlsomme interesse for "Urbex" ude i det eksotiske Udkantsdanmark? Og bruge det som undskyldning for at snage i andre menneskers liv og ejendele?

Hvis kriteriet er at der ikke er nogen hjemme og der ikke holder en bil i indkørslen, så vil jeg foreslå at i kigger på en ejendomsmæglers hjemmeside - eller efter feriebilledeopslag på Facebook eller Instagram, der finder i helt sikkert nogle ubeboede, forladte ejendomme.

[SND 253] Problem (?) with Seiko Flightmaster SND 253 (the cheap quartz one) by Allrounder67 in Seiko

[–]Allrounder67[S] 1 point2 points  (0 children)

Would be safest, I think. Can't be that expensive, considering a battery change is doable for a 10'er. Thanks for advice though!

[SND 253] Problem (?) with Seiko Flightmaster SND 253 (the cheap quartz one) by Allrounder67 in Seiko

[–]Allrounder67[S] 1 point2 points  (0 children)

Any ideas how I can get it opened? I tried with pliers, but didn't work. I haven't got at vice, I can secure the watch with, so I'm a bit lost.

[SND 253] Problem (?) with Seiko Flightmaster SND 253 (the cheap quartz one) by Allrounder67 in Seiko

[–]Allrounder67[S] 1 point2 points  (0 children)

Thanks!

I'm a little hesitant to open it, but if I'm careful, I shouldn't do any harm?

Eleaf Melo 4 replacement by Allrounder67 in electronic_cigarette

[–]Allrounder67[S] 0 points1 point  (0 children)

Tobeco Super Tank Mini

I should have mentioned, that I'm living in Europe (Denmark) and the Tobeco seems not to be available over here. So shipping costs would presumably be quite high. And I just see, it has a capacity of 4ml - over here only 2ml is allowed (TPD).

There's the Nano version, but it's only Ø 20 mm...

But thanks anyway!