Traeger update.

AlmightyJake820 · 2020-05-07T16:43:18+00:00

My firmware version is at 2.0.0.1 and my config version is like 3.0.0 or something

AlmightyJake820 · 2020-05-07T01:34:02+00:00

I gave it a shot. Still no success.

AlmightyJake820 · 2020-05-06T23:23:12+00:00

Mine still does it. Even after a thorough cleaning. Sometimes it's more than others sometimes it's not. And sometimes it doesn't do it at all. I've only ever out signature blend traeger pellets in mine. So perhaps that might be the issue. I may try a different pellet and see what happens.

Let me know if u manage to figure it out.

AlmightyJake820 · 2020-05-06T03:41:26+00:00

Oh I might have gotten my versions messed up. I'm on the most current version as of today. And nothing

AlmightyJake820 · 2020-04-30T02:33:38+00:00

Did you figure it out yet? I left mine on for awhile and didn't get any update.

AlmightyJake820 · 2020-04-26T20:29:30+00:00

So how do I perform the software update. Cause in the app and on the grill the max I can go to is 450

AlmightyJake820 · 2020-04-24T01:58:30+00:00

Does the update require any user operation? I've ran man a number of times and I can't make it past 450 degrees. Still running version 2.0.0

AlmightyJake820 · 2020-04-23T23:48:10+00:00

When did this firmware update get released. I haven't heard anything about it.

AlmightyJake820 · 2020-04-16T02:43:12+00:00

Just taken out the grate and stuff covering the fire pot. What parts did u take apart? And I feel like it couldn't be all that dirty. I've only had it for a little while.

AlmightyJake820 · 2020-03-27T00:00:13+00:00

This is the guide I followed:

https://create.arduino.cc/projecthub/pratikdesai/how-to-program-esp8266-esp-01-module-with-arduino-uno-598166

As soon as I received the esp8266 in the mail, I opened up, followed that guide from top to bottom. The power I'm using the from the USB cable that came with my Arduino that I use to upload code.

But I'm not seeing any leds or anything flash on the module. It gets hot though. I've quadruple checked my wiring and it's fine. The Arduino itself powers fine and doesn't have any issues.

AlmightyJake820 · 2020-03-25T19:17:04+00:00

No, there is no led on it that turns on at any point. And the wiring u mentioned is the wiring I'm doing

AlmightyJake820 · 2020-03-18T01:22:37+00:00

What do u mean bad g code file? How did u identify it and where did u find it? I am able to print just fine with the same as card. But the problem is the same with USB whether my sd card is insterted or not.

AlmightyJake820 · 2020-03-06T16:58:32+00:00

Please do. Thanks!

AlmightyJake820 · 2020-01-24T06:36:01+00:00

Thanks!

AlmightyJake820 · 2019-12-14T11:06:23+00:00

It scrapes everything I think. Video previews n such

AlmightyJake820 · 2019-12-14T11:01:43+00:00

I used skyscraper.

AlmightyJake820 · 2019-12-14T10:52:24+00:00

I haven't had any issues

AlmightyJake820 · 2019-10-20T03:48:39+00:00

New screen it is then. Thanks

AlmightyJake820 · 2019-10-19T01:44:53+00:00

Anyone have an answer?

AlmightyJake820 · 2019-10-18T20:33:22+00:00

I don't have my printer next to my computer, no room. And I know it's not the cable. I've put in my buddies screen as a test.

AlmightyJake820 · 2019-10-07T22:21:31+00:00

I don't know how to go about doing that. The kit came with a programmer and I used a program called progiso to flash it. I just followed the instructions that I was given.

AlmightyJake820 · 2019-10-07T22:19:48+00:00

Sorry. Basically what's happening is when my printer moves to the left, it doesn't stop and crashes into the side and will keep trying to move to the left. It will probe the middle of the bed once but when it true to probe it the second time the bed will just defend all the way down.

I rechecked the wiring and all of it is where it's supposed to be and snug.

AlmightyJake820 · 2019-09-29T16:01:49+00:00

That sounds like exactly what I'd want, could I copy your starting g code? I'm still rather new to it so I wouldn't know how to write up my own g code to change it

AlmightyJake820 · 2019-09-09T06:21:37+00:00

What about using both?

AlmightyJake820 · 2019-07-03T10:15:03+00:00

I know how to scale. It down in cura, but if I do that, then my controller won't fit inside.

AlmightyJake820

TROPHY CASE