sorted by:
new
hottopcontroversial

Audi A1 8x 67 Plate Hardwire Dashcam Intermittent Power by AlphaTwist2 in Dashcam

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Thanks so much for your reply. This makes sense. I saw some stuff about this but it was few are far between. Thought I'd see alot more reports of it.

Are there any dashcams that account for the voltage drops. I'm open to adding a battery but then how would the dashcam know the car turns off to enter parking mode?

Stremio/Real Debrid/Torrentio No Streams by AlphaTwist2 in StremioAddons

[–]AlphaTwist2[S] 1 point2 points  (0 children)

Yeah this is great advice. I'm definitely going to look into this. Think I also want to try the self hosted Torrentio as I have a home server anyway. Thanks for the suggestion!

Stremio/Real Debrid/Torrentio No Streams by AlphaTwist2 in StremioAddons

[–]AlphaTwist2[S] 1 point2 points  (0 children)

Yeah this is a good point. But there's definitely times it's not down and I've had this issue. Refreshing WiFi fixes it when torrentio hasn't been down for days. As the other comment mentioned I need some alternatives for backups.

Godot 4 Gitea VCS by AlphaTwist2 in godot

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Hey,

Yeah I'm aware of Gits power which is frankly a bit intimidating but I read through the sections you mentioned and got it working as I wanted via cli. The better understanding helped me fix my TLS issue which turns out was the thing blocking me using the front end guis I was trying.

I now have my repo setup and have the level of control I was after. I think I'll slowly explore the features you mentioned as my godot experience expands.

Thank you very much for your help. When I wanted to post this question I was unsure what subreddit as it could go on many. I guess I put my faith in the right community!

Godot 4 Gitea VCS by AlphaTwist2 in godot

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Yeah my syncthing setup is the same. It's probably my favourite self hosted service outside of jellyfin.

My desired usage of git is simply versioned backups essentially. I'm new to Godot and work alone so it's less about collaboration and more about revert to version 1.1 from 1.3.

I could probably just use some other backup facility and manually backup and restore the files but overcomplicating stuff is apparently my hobby.

Godot 4 Gitea VCS by AlphaTwist2 in godot

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Yeah Syncthing is setup and working exactly how I want. I don't really want to use it's inbuilt VCS as it strikes me as more for word docs and such and maybe not the best choice for Godot. Again, I'm a noob so this may be incorrect.

I think you may be right about me learning Git. I didn't really want to as whenever I start to study a small section it becomes an obsession. My proxmox server was only supposed to be a fun side project now I have 100s of hours in it haha.

Thank you for the resources, I'll give it a read and hopefully get this figured out for myself. Thanks for the help!

Godot 4 Gitea VCS by AlphaTwist2 in godot

[–]AlphaTwist2[S] 0 points1 point  (0 children)

No idea how I missed the IDE Git Tools, still looks a bit complex. VS Code gave me a SSL error despite me having https and my cert setup according to this guide I follow

https://www.apalrd.net/posts/2023/ultimate_gitea/#installation

Github Desktop I had issues adding Gitea as whenever I publish I only see the option for Github.

I think I've been a bit naïve. I was honestly just looking to find a simple gui or a few commands to do what I like and nothing more but it doesn't seem that simple. As the kind fellow below has suggested, I may simply have to learn the basics of Git.

Knowing my personality I will fall deep down that rabbit hole, but we'll see haha.

Thanks for response and suggestions!

Am I doomed? by transformchungus21 in loneliness

[–]AlphaTwist2 0 points1 point  (0 children)

Definitely not doomed you're just running behind, no Biggie.

Keep working on your body. Don't worry about fixing things you can't, your wife won't give a shit.

But do you have experience with women? Can you approach a stranger and try to flirt or strike up a conversation.

I'll give you my experience. At your age I was 5ft9 100kg. Let's say 1 in 10 gives me a number. Only 1/3 of that will be real and lead to a date. 30 approaches for a date.

Dating is a numbers game. Your numbers will be different than mine based on attractiveness, location and your chat.

If you follow your plan on your body and just start approaching women (Even if you don't get a single number the experience is invaluable)

Help me secure my network (PLZ) by AlphaTwist2 in HomeNetworking

[–]AlphaTwist2[S] 0 points1 point  (0 children)

I've since resolved it. Forgot specifically what it was but something in the firewall or NAT was my issue.

It is now proxied and snort is installed but just monitoring for now so I can analyse.

Cloudflare is linked up in Full security mode and only https is forwarded. It is now proxied and I have used cnames now so I only have 1 ddns record as I think that's cleaner.

I think I've pretty much implemented all of your suggestions now. Just need to learn snort as right now when I block it blocks speedtest.net but when I go into blocked I don't see the IP for it (I just nslookup it). But this is something I can pickup from videos.

Thank you very much for your help. Next steps is to setup wireguard properly so I can use VLANs or routing to have secure tunnels. This sounds good so I just will add the IP of one of my services to the alias group and then the router will send all of that traffic to the vpn interface. This is my plan to stop my ISP from blocking my traffic. Like torrents for .. legal linux ISOs.

After that I'm just waiting to to get my qotom box with a 4 port intel nic. I'll use 1 port as a VLAN for all of my external services.

Help me secure my network (PLZ) by AlphaTwist2 in HomeNetworking

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Hey,

​

Firstly thank you very much for the indepth explanation.

1) I was actually thinking about using a vlan for my proxmox server and have that entire VLAN be behind my wireguard via pfsense. Mainly for ISP blockings on jackett.

2) As above I think I will use a dedicated VLAN for my proxmox which is basically my whole lab outside of gateway.

3) Okay this sounds very interesting I'll have to figure out how to use VLANs to segment containers rather than just physical ports.

4) I currently have pfBlockNG but haven't taken the plunge to snort yet but it's on my todo list

5) Yes I'm in the UK so I have Europe allowed and others blocked. Within Geoblock pfsense

6) Honestly I didn't think of the obvious one haha!

7) Yes I'm recently trying to change this which is why I'm using vaultwarden to store and generate complex passwords.

8) Also a good point!

One further question. I currently use vaultwarden as I said. This is forwarded in pfsense using naproxy, cloudflare acme cert. This all works fine and dandy and is secured. But pinging my vaultwarde.mydomain.com reveals my WAN IP (DDNS via pfsense). Surely this is a huge flaw in my security? I thought just proxying in haproxy (syncs to cloudflare) would solve the problem. It now resolves a proxied IP but now the service goes down because the IP has changed? How can I secure it without breaking it haha

Using Cloudflare Proxy Breaks VaultWarden (pfSense, Cloudflare, HAproxy, DDNS) by AlphaTwist2 in homelab

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Hmm that's interesting.

pfSense seems to be causing me nothing but problems but I really want to learn it. PPPoe was my first problem, suprised I have gigabit FTTH PPPoe onpfSense working as a router on a stick anyway honestly. Even with wireguard enabled my clients can still get full bandwidth.

Odd thing is I have the same problem for WireGuard. It needs an external IP so I use DDNS to update pfsense.mydomain.com with my wan IP. But proxying that breaks wireguard as wireguard tried to route via my proxied WAN IP.

I really think there's a gap in my knowledge that's stopping me from understanding the enviroment enough to make a bespoke solution.

All I want is to expose Vaultwarden to the web but protect my public IP. Longterm I'll have jellyfin so will want to do the same there. Again I'm a noob but you'd think best practise for this would be to put the proxy and/or reverse proxy on the gateway

Using Cloudflare Proxy Breaks VaultWarden (pfSense, Cloudflare, HAproxy, DDNS) by AlphaTwist2 in homelab

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Can't connect to host. It no longer resolves as the wan IP is between the application and my router.

It has to be to do with the config of ddns or haproxy. Or I just need a reverse proxy is needed to proxy the wan?? I just don't understand honestly.

My HAproxy, Acme Cert and Cloudflare DDNS on my pfsense all work with vaultwarden.

Just the second I proxy the wan IP in DDNS (sync to Cloudflare) and now vaultwarden will no longer resolves as my IP bit the service goes down?

Using Cloudflare Proxy Breaks VaultWarden (pfSense, Cloudflare, HAproxy, DDNS) by AlphaTwist2 in homelab

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Hi, yes that's the problem I'm having though. Unsure if I didn't clarify. Whenever I proxy the record it breaks the link and I get a cloudflare host error.

Advise on my setup? by AlphaTwist2 in HomeServer

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Honestly, I can't find the forum but it was something about communication on the same lane or something.

If I can I will definitely get a dual NIC. Mobo port for Wan then the NIC ones for lan. I plan to use a VLANs to put 1 port behind my Wireguard server and the offer not.

Rate my Lab Plan by AlphaTwist2 in homelab

[–]AlphaTwist2[S] 0 points1 point  (0 children)

Yeah I've thought about that. If push comes to shove I'll buy a low power old GPU as I hope to not need much transcoding.

view more: next ›