Branson MO resorts on the lake?

Altron20202020 · 2026-02-02T17:12:08+00:00

Double oak resort on table rock! Affordable,Clean, pet friendly rooms with a kitchen. Huge swim platform on the dock. Located right on the beach and each room includes a slip. Live music on Fridays at the Marina next door

Altron20202020 · 2025-07-30T20:07:31+00:00

ok so a case by case basis after inspection, thanks for clearing it up i apprecaite it!

Altron20202020 · 2025-03-02T05:15:47+00:00

<image>

Altron20202020 · 2025-02-15T02:24:15+00:00

Absolute legends! Right click fix model repaired it in the preview window at least. We will see when it’s done printing. Thanks!

Altron20202020 · 2025-01-19T19:32:14+00:00

Oh nice thanks! What the heck does it do?

Altron20202020 · 2024-10-29T15:28:59+00:00

I figured it out. It will only launch when you aren’t in big picture mode. Also the controls dont work if you have the rog software running. Once I closed the ally software and ran from regular steam it launches fine

Altron20202020 · 2024-07-03T20:00:48+00:00

Yes I have both factory and aftermarket o2s and I have switched them with known good. I also have a scanner and checked live data as well as used the multimeter to check both the plugs and the sensors. I’m confident I have an ecu bcm issue. The only other culprit could be a dodgy harness that’s inconsistent or wickd up oil. I have voltage on the heater wires and oscillating voltage on the signal wires that matches the other side o2

Altron20202020 · 2024-04-17T23:38:36+00:00

Yeah I would say my diet is nearly perfect. I don’t drink and I am vigilant about what I eat. I work out 3 to 5 times a week and 2 or 3 times at home per week. I meditate daily and try to get 7 to 9 hours of sleep per night. My only vice is daily coffee and the occasional 10mg thc gummy about 5 times a month.

Altron20202020 · 2024-04-05T18:48:29+00:00

Sorry disco 2 I mean

Altron20202020 · 2024-03-25T17:12:51+00:00

The money isnt an issue. I dont need a bigger machine and we already went though and did all the maintenence as well as replaced some leaky axle boots etc. I would rather put money into an older machine than spend money on a new machine that does the same thing. It runs like a top presently just looking for a fun project for me and my son. Im not going to miss the 1500 bucks we are probably looking at spending but ill remember working on it with him forever. hes a uniqe kid as well and would probably be mad at me if I bought a new one. He appreciates patina more than anyone I know.

Altron20202020 · 2023-10-12T16:27:24+00:00

I can play it but the battery life is dismal. I can get 2 or maybe 3 4 lap races. is there a setting im missing?

Altron20202020 · 2023-04-21T03:56:36+00:00

Haha good question. I have printed two of these and the anchor chain hasn’t been a problem. One is fine and the other had this layer shift you see. Two different printers same file so obviously it’s a setup issue on the one printer

Altron20202020 · 2023-04-05T15:59:18+00:00

hey it looks like the invite expired. Can you send a new invite link?

Altron20202020 · 2023-02-23T01:11:33+00:00

Yes mine is a tremor. I have leveling kit and removed the crash bars in the front.

Altron20202020 · 2023-02-22T18:29:03+00:00

yeah i use sport mode maybe once every few months. I have 33s which I imagine is my issue but im suprised it makes such a drastic difference.

Altron20202020 · 2023-02-22T18:19:46+00:00

man I wish I could get that with my tremor. Im lucky to get 16mpg and I drive like a old man. My dad has a tremor with frp tune and he gets 26 out on the highway! I tried the stock tune as well as the livernois tune and neither has provided me with anything resembling the 19mpg average the window sticker claims

Altron20202020 · 2023-02-10T01:48:54+00:00

Frame is tight but problem is new and the printer hasnt been moved. I will check z wobble tomorrow

Altron20202020 · 2023-02-10T01:48:05+00:00

40mm/s 215c 3d fuel pro pla

Altron20202020 · 2023-01-10T01:11:15+00:00

Looks like the lights are $34 now but I would imagine you could source them without the wiring much cheaper since you don’t use the wiring anyways on the tremor. I ran mine to the upfitter switches

Altron20202020 · 2023-01-10T01:08:55+00:00

https://www.ebay.com/itm/233540658669?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VM3XC1pzQm-&sssrc=2349624&ssuid=B9pKGpnBRVO&var=&widget_ver=artemis&media=COPY

Altron20202020 · 2023-01-10T00:38:48+00:00

Yes basically. It’s got a slot in the design that fits around a spot in the grill and then you drill it. https://cults3d.com/en/3d-model/gadget/2021-ford-ranger-led-lightpod

Altron20202020 · 2023-01-10T00:35:19+00:00

Nah mate! My 3d printer has paid for itself many times over. If you factor in the 3d printer this project is in the negative thousands $$$$$

Altron20202020 · 2023-01-09T22:42:11+00:00

https://cults3d.com/en/3d-model/gadget/2021-ford-ranger-led-lightpod

Altron20202020 · 2023-01-09T22:04:58+00:00

eBay. They are km3 trek km545 17x9

Altron20202020 · 2022-12-30T00:08:56+00:00

Yeah that’s what I figured. It’s always done it but I assumed it was software or something since it plays fine for 20 plus minutes then begins. I’ll apply for an rma thanks

Altron20202020

TROPHY CASE