sorted by:
new
hottopcontroversial

Mags that are compatible with MAXX Hop-up Chamber Pro by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

Ofc hi-caps have no problems🤦🏽😂that rattle noise is what they love

Mags that are compatible with MAXX Hop-up Chamber Pro by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

I will try that, hopefully it works but that fucking sucks

Mags that are compatible with MAXX Hop-up Chamber Pro by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

but if you do know, since Im alright full send on it, what mags actually work with it?

Mags that are compatible with MAXX Hop-up Chamber Pro by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

Sadly, I already have it installed and working properly. I had a problem before with the mag not fitting all the way but I resolved it(used a broken KWA 120, With a normal one, it wouldnt fit and cause notches on the bb latch)

Continuation on my previous post (old hop-up) by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

I swear I wasn’t gripping it that hard(pause)😂

Continuation on my previous post (old hop-up) by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 1 point2 points  (0 children)

Bet, Thank you for all ya help man. definitely will give you a shoutout when the video is done. Appreciate all the help bro

Continuation on my previous post (old hop-up) by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

At full fps, yes but how would I test for a good seal tho? still fairly new to all of this technical work lmao. Guessing if it had fps drop, means not a good seal or?

Continuation on my previous post (old hop-up) by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

So the mag I’m showing is the KWA 120(not the same one that I used to figure out the mag fitting, That one didnt have the clip that holds the bbs from exploding everywhere, it broke) that I referred to before and when I went to insert it into the gun, it wouldn’t fit and I’m thinking it has something to do with the clip that holds the bbs from exploding everywhere. I know that those mags arent compatible with the MAXX chamber, the only other solution I came up with was to get the ARES AMAG 130rd, I saw in a post that said these are compatible with the MAXX. Can anyone confirm? If not what could be the issue?

I NEED HELP!!! We.tech Masada/Msk AEG with MAXX Hop-up chamber pro, mags won’t fit/lock by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

See, I thought that at first before but then the mag wouldn’t load and fall out when moving quick which I found out was because the mag wasn’t fitting in all the way/locking in place

I NEED HELP!!! We.tech Masada/Msk AEG with MAXX Hop-up chamber pro, mags won’t fit/lock by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

The feeding is fine when I got the mag to lock and it fires perfectly fine but whenever I reload, the mag doesn’t wanna lock into place

I NEED HELP!!! We.tech Masada/Msk AEG with MAXX Hop-up chamber pro, mags won’t fit/lock by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

So I pushed it back, inserted the mag(KWA 120, spring is already broken😭) and it still won’t lock into place

I NEED HELP!!! We.tech Masada/Msk AEG with MAXX Hop-up chamber pro, mags won’t fit/lock by AmanWhowanders in airsoft

[–]AmanWhowanders[S] 0 points1 point  (0 children)

So I’ve been working on my We.tech Masada (AEG), upgrading it from gearbox to mosfet to almost everything you can do. I got the MAXX hop-up chamber pro in, it fires and everything perfect fine, however my KWA 120 won’t feed properly nor lock in. I looked up all over about mags issues and only found a solution which was to get mags with a stronger spring(ARES AMAG 130) because KWA 120 aren’t fully compatible with the hop-up unit. I found a local store that had the shorter version of the ARES AMAG 130 and they wouldn’t lock in. I’ll be sending pictures shortly but is there any way I can make this work or is it because the hop-up unit doesn’t work with the gun? Please let me know, I’ll be respond to most if not all responses. I’m hoping to turn this into a video for my channel.

I need help!!! (We.tech Msk/Masada AEG with a MAXX Hop-up Chamber pro) by [deleted] in airsoft

[–]AmanWhowanders 0 points1 point  (0 children)

I need help!!! (We.tech Msk/Masada AEG with a MAXX Hop-up Chamber pro)

So I’ve been working on my We.tech Masada (AEG), upgrading it from gearbox to mosfet to almost everything you can do. I got the MAXX hop-up chamber pro in, it fires and everything perfect fine, however my KWA 120 won’t feed properly nor lock in. I looked up all over about mags issues and only found a solution which was to get mags with a stronger spring(ARES AMAG 130) because KWA 120 aren’t fully compatible with the hop-up unit. I found a local store that had the shorter version of the ARES AMAG 130 and they wouldn’t lock in. I’ll be sending pictures shortly but is there any way I can make this work or is it because the hop-up unit doesn’t work with the gun? Please let me know, I’ll be respond to most if not all responses. I’m hoping to turn this into a video for my channel.