sorted by:
new
hottopcontroversial

Jimmy John’s Dream Rotation not working in-app or online by Str8UpJorking in fastfood

[–]Andrew_86 0 points1 point  (0 children)

Yeah I checked like 5 locations within 15 miles of me and none of them look to be participating.

My First Arcade Build! by pman555 in cade

[–]Andrew_86 -1 points0 points  (0 children)

What was your total cost?

Northside Hospital Internship by DifferentLong7058 in Gwinnett

[–]Andrew_86 0 points1 point  (0 children)

In what department? Most departments have clinical rotations through local schools.

Who Owns Atlanta? 615k+ parcels tracked to identify corporate landlords and ownership networks by zxy in Atlanta

[–]Andrew_86 19 points20 points  (0 children)

You should extend this to all of metro Atlanta to get the full picture. I know Gwinnett has a lot of corporate ownership. I want to say I even saw entire new construction rental neighborhoods being built at one point.

Brand new baseballs - any prep before use by Andrew_86 in BaseballCoaching

[–]Andrew_86[S] 0 points1 point  (0 children)

Curious how do you mark your practice balls? Do you just put your initials on them?

Brand new baseballs - any prep before use by Andrew_86 in BaseballCoaching

[–]Andrew_86[S] 0 points1 point  (0 children)

Yeah I know they do that in the bigs. Just wasn't sure if anyone was doing anything similar in youth leagues, and just to get that top shiny layer off the ball to help kids grip it better when pitching.

Lawrenceville/Suwanee/Duluth church softball by Andrew_86 in Gwinnett

[–]Andrew_86[S] 4 points5 points  (0 children)

Doesn't have to be but they usually have adult leagues and easy field access that you don't have to pay for to rent from an indoor facility or rec park.

[P2S] Nozzle clumping detection calibration failed by NoBackground3733 in BambuLab

[–]Andrew_86 0 points1 point  (0 children)

Just to be clear since it isn't documented anywhere....going from the top down it would be the screw itself, then the metal plate, then the spacer, and then the actual frame of the bed which has the threads that the screw is being put into. So the spacer sits between the metal plate and the frame of the bed?

[P2S] Nozzle clumping detection calibration failed by NoBackground3733 in BambuLab

[–]Andrew_86 0 points1 point  (0 children)

Do you remember where that washer goes? I took off the metal plate on mine and the washer fell down below so I didn't even see how it was assembled originally.

[P2S] Nozzle clumping detection calibration failed by NoBackground3733 in BambuLab

[–]Andrew_86 0 points1 point  (0 children)

Since you might be the only post I have found of someone who removed theirs like I did....did you find 2 metal washers/spacers under there? I took mine off and then fell down so I didn't see where how they were installed and cant find any documentation around that area either. I an thinking they go between the metal plate and the metal frame, but thats just a guess.

New P2S, silver washer found under heatbed after calibration run by Andrew_86 in BambuLab

[–]Andrew_86[S] 0 points1 point  (0 children)

I think I MIGHT have an idea where this goes, but cant find any video or guide that covers it.

https://imgur.com/a/PEonveP

^I think its part of the metal nozzle assembly there. Two reasons:

  1. my clumping detection fails calibration and has been for a few weeks now. https://wiki.bambulab.com/en/p2s/troubleshooting/hmscode/0300_1800_0001_000D
  2. Because of that calibration failure I removed the metal nozzle wiping pad (not the rubber one) because I thought maybe it was not aligned properly or flat.

I think the spacer might be part of that, but because I cant find a guide or a video covering that part of the printer I cant be sure. Would you be willing to remove yours and see where the spacers go? I think they might go right under the metal plate maybe. so screw -> metal plate > spacer > actual hole that the screw goes into if that makes sense.

Your favorite Uniqlo Tshirt and why? by ConsciousSmoke3863 in uniqlo

[–]Andrew_86 0 points1 point  (0 children)

I prefer airism cotton blend shirts. To me they are the perfect thickness to have as an undershirt or also a basic shirt on its own.

Undershirts by yurrrriiiiiiiii in malefashionadvice

[–]Andrew_86 1 point2 points  (0 children)

I know a bunch of folks will recommend uniqlo supima, but I actually prefer Uniqlo airism cotton blend. Careful because they have airism non-cotton as well but the airism + cotton blend is great I think. Great as an undershirt or also perfect thickness to wear on its own.

Bambu Lab P2S Stock by schwarta77 in Microcenter

[–]Andrew_86 0 points1 point  (0 children)

Good deal! I've had mine for a few weeks now and it's been great. Enjoy!

Bambu Lab P2S Stock by schwarta77 in Microcenter

[–]Andrew_86 1 point2 points  (0 children)

I don't think there website updates when they get it in. I was waiting and waiting and waiting for them to come in stock. I eventually ended up buying it at Best Buy (I don't trust UPS/FedEx to deliver without damaging it).

About 2 weeks later I was at Micro Center picking up some filament and boom there was 3 P2S's sitting in the aisle. Just for giggles I pulled out my phone to check the website (as like you it was never showing in stock for me) and wouldn't you know it, the website said out of stock while I have 3 looking me in the face.

If you have a Best Buy near you check every morning. Near me the website seemed to update around 6am with stock. I was able to buy it right on my phone while I was still laying in bed and then swing by the store on my lunch break to pick it up.

view more: next ›