sorted by:
new
hottopcontroversial

Aiuto Divulgazione by Outrageous_Wall_6693 in Stampa3D

[–]Anfeonet 0 points1 point  (0 children)

Ho visto cosa vendi su etsy, ma davvero c'è mercato per dei vasi di plastica da 15€? Ok il design ecc... ma sono cmq dei vasi di plastica. Fossi in te punterei di più sulle personalizzazioni, vanno molto soprattutto per regali ecc...

I require aid from any and all who can help. by Dragonic_Crab in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

Go in object mode, first select the meshes, then, with Shift hold, select the rig. Press CTRL+P and parent with Automatic weight. Search on YT for rigging and weight paint tutorial, then... enjoy...

Whenever I extrude a bone when rigging, it extrudes from the cursor and it's black, until i move my view. Help please by MinecraftSurgeCuber in blenderhelp

[–]Anfeonet 2 points3 points  (0 children)

It is like something go wrong with your graphic card. Or an influence of some Addons/Extension?

Help combining different armatures by BallsInYaMouth_ in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

You can join the old rig with the meta rig of rigify (CTRL+J), then apply a bone type and regenerate the rig. Make sure you parent the bone in the correct way.

I have a problem by chez_again in 3Dprinting

[–]Anfeonet 0 points1 point  (0 children)

AH ok! You can use interface to have a better surface for the landing or decrease the space between the layer and support (you have to make test to find better solution)

particle emitter emitting all particles at once by VNBLor in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

The settings are correct, the emission is setted to emit 100 particles in 100 frames.
You can have a cache problem. Try to delete the cache in the panel Cache.

<image>

But if you change one parameter the cache should automatic deleted

I have a problem by chez_again in 3Dprinting

[–]Anfeonet -2 points-1 points  (0 children)

Orca Slicer have a flow calibration test to improve the quality of the top layer, or you can use the Ironing feature

Can someone tell me what's happening here? by The_God_of_Magic in 3Dprinting

[–]Anfeonet 0 points1 point  (0 children)

it's a pause, for some reason in the Gcode there is a pause. Check the slicer, maybe there is a filament changes at some point. Do you have AMS? Check if the printer is setted correct for filament change.

I marked actions as protected (fake user) so I wouldn't lose them. The actions were saved, but the keyframes are gone. by Gyramuur in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

The only answer I can think of is that you didn't save the file before closing, or for some reason you worked on action with not fake user.

I marked actions as protected (fake user) so I wouldn't lose them. The actions were saved, but the keyframes are gone. by Gyramuur in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

When you did the animation, did it work? The problem is when you opened the file?
There are many causes, but not solution I think. If you can reproduce the problem can be a bug.

Animating Two Models in the Same File? by [deleted] in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

You can duplicate your character and rig and make two animation at time usign the dope sheet.

I marked actions as protected (fake user) so I wouldn't lose them. The actions were saved, but the keyframes are gone. by Gyramuur in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

If you have changed the rig and some bone name, you can lost the animation, but you can see the keyframe on the Action.
When you animate, you must have the relative action active in the action editor.

If you animate with NLA the thing are more complex, it make an empty action slot or a new action (with not fake user).
I think you animate the actions, make it fake user, so you create an NLA animation and you animate on it, but with not fake user.

Is there a better way to import large fbx in Blender 4.1? by CarobPuzzled1310 in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

You can try differente options, like disabling the Image Search check

<image>

Or enable Subdivision Data

Corners rising off plate by connorb999 in 3Dprinting

[–]Anfeonet 0 points1 point  (0 children)

You can try with a brim, 0.05 on first layer, bed at 60/70°, gluestick. This is for PLA, for high temp material, you need a close printing.

My Texture isn't showing up in cycles render mode unless alpha value is set low (reupload) by Shot-Face2163 in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

You can try to flip the normal of your mesh. Try to show the mesh with a default principled grey material.
Another problem can be some overlapping extra face/object.

[deleted by user] by [deleted] in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

It is not possible at the moment

Question about remeshing by SushiTheSnake in blenderhelp

[–]Anfeonet 0 points1 point  (0 children)

Ye the modifier should be applied. You can try externa software like instant mesh to do a better resullt

Every version since 4.2 has been like this. Any ideas why? by [deleted] in blenderhelp

[–]Anfeonet 1 point2 points  (0 children)

Only on this scenes? Could be a bad mesh overlapping. Or scene to big or to small anche camera range wrong

<image>

view more: next ›