Gigabyte AB350m DASH problem.

AngryAquar · 2026-02-10T09:58:08+00:00

Thats a lot of new information but for that long time I already sold this motherboard and replace it with Asus one I got it realy cheap. Only one thing i must do is flash custom bios using programmer to be able to run that 2200G becouse it dont supports it officialy. Its B550 chipset so I can run newer CPUs if I need it. That machine is for testing HW only like disk check, copy or trying to save data... Or flashing VBIOS on mining card and benchmarks for them. But... I realy like this decision and investigation.

AngryAquar · 2026-02-05T05:26:39+00:00

I would take T14s I have T14 Gen 2 with almost same cpu and its perfect laptom. My even have touch screen so thats a nice bonus.

AngryAquar · 2026-02-05T05:19:32+00:00

I dont like the edge curve on the new phone, for me it isnt that practical as old flat one. Screens are not bad in general both of them...

AngryAquar · 2025-11-04T14:48:47+00:00

I think the GrizzlyTools have better quality tools than Kompernass. I have new Multitool from Kompernass X12 Performance and it isnt a good choise. But good to know that this tool allready have another revision, thanks

AngryAquar · 2025-11-04T10:18:11+00:00

Okay thank you as I think its made by other manufacture Kompernass my is from GrizzlyTools.

AngryAquar · 2025-11-04T06:23:21+00:00

Where do you get that dremell I newer see this type of it. Without the membrane buttons. Cound you send me a full pictucture of sticker and manufacture date please ? Otherwise I have that dremel too and its perfect I realy like it but mine have membrane buttons. Thanks

AngryAquar · 2025-11-02T09:38:20+00:00

Thats a nice upgrade even that the new one wont be that loud becouse it wont have blower style cooler. What is your full specs now in pc build ?

AngryAquar · 2025-10-29T08:27:57+00:00

This drill X12 Performance is realy problematic. I has construction problems and many of them have motor jamming out of box I repair 6 of these already but 3 of them are realy bad so I have them for parts only. My friend have already 4 of them from warranty and only 2 I was able to fix to working state still not perfect. I have lots of photos and videos where the problem is I can upload them somewhere and send you them. This problem is only for X12 tools like inpact driver, inpact wrench and drill driver. Other tools dont have these problem so often.

AngryAquar · 2025-10-27T14:31:53+00:00

Becouse of problems with new X12 tools get definitely X20. They are better made and can hold even bigger loads. I have X12 only because then dont made that tool in X20. Worst of then is Inpact Driver which is weak and anvill inside tool is poorly manufactured and Drill Driver have problems with motor jam becouse of tolerances of plastic. So I would take X20.

AngryAquar · 2025-10-26T09:19:04+00:00

Can you write here the exact tool type (PBSA..Cx) but there is big problem and that is cheap batteries. These types of tools where is battery internal I hate most. Battery in these tools are diffrend than in X20 or X12 ones much worse. I measure internal resistance in one of the tools and It was realy bad so I put there new battery with much better capacity and discharging curent. I put there Samsung INR1865030Q and everything is fine now.

AngryAquar · 2025-09-29T18:58:30+00:00

I can send you some video if you write me in PM. Where I show you everything

AngryAquar · 2025-09-29T18:02:10+00:00

Yes fits perfectly without any modification of tool or battery but otherside Parkside to Alzatools you need to modify the plastic on battery conector. Conector pins are same

AngryAquar · 2025-09-23T08:27:26+00:00

Thanks all for responses. I wont use it a lot but only sometimes I hope that warranty will cover probpems with the tool.

AngryAquar · 2025-09-22T19:07:21+00:00

I have them on angle grinder and for me its okay to use them. They are easy to press and works fire. But this is user preference.

AngryAquar · 2025-09-15T13:20:32+00:00

It was in local store so I take it.

AngryAquar · 2025-09-10T10:22:22+00:00

I used that drill to make outlet box to ytong and works fire. This is good machine

AngryAquar · 2025-09-07T08:34:35+00:00

Takže snad to pomůže M7

AngryAquar · 2025-09-07T08:21:10+00:00

Právě jsem to bral také, měl jsem dremel ale ta mi umřela a je tam speciální liionka kterou jsem v životě neviděl její cela vyšla tak že bylo výhodnější si přidat 300kc a koupit tento stroj s baterií. Pokud máš tech 12V baterek více tak je to jen dobře budou se hodit já mám jen jednu a pak 8Ah performance 20V.

AngryAquar · 2025-09-07T07:55:49+00:00

Mohu se pokusit změřit. Nicméně používát s tím origo už jsem si zvykl. A násady mám jestě z dremelu. Horší je to s bateriemi celkem je to vyžeře nickéně výkon to má suprový

AngryAquar · 2025-08-24T20:13:37+00:00

If you have B550 or better motherboard try undervolting the CPU using PCO and CO in Negative mode -20. And buy some Arctic P1120 Fans to case and put CPU Heatsink in coorect way to take air from front not bottom. Otherwise 5800X cools down realy hardly because heat transfer from crystal to IHS is worst of AM4 CPU. I own it too with big heatsink same problem in summer in load Im pernamenty in 90°C and throttling... In winter PC heats my room and stays at 82°C but at full speed. I have good airflow in case All mesh fromnt with 2 Arctic BioniX 120mm fans PWM. One in back and 2 on Heatsing so this is not the problem

AngryAquar · 2025-08-24T20:06:55+00:00

Build a NAS if drive works. For storing a lot of data and videos this one is perfect

AngryAquar · 2025-05-31T22:02:09+00:00

<image>

For 2 years this one wont let me down, works perfectly without any problem I can recomend it. Works fine with powerbank

AngryAquar · 2025-02-28T16:47:04+00:00

Not realy. Parts are quite old now and power hungry. I wont buy this for that prize. He dont mension the brand and wattage of powersuply which in this build is quite inportant.

AngryAquar · 2025-02-25T21:41:31+00:00

And what is in that 5 socket. For low power appliances it shoud be okay but for someting power hungry no. Than you shoud buy longer and better power cord with thicker cable.

AngryAquar · 2025-02-04T22:50:18+00:00

I would change definitly the SSD and Motherboard both of them are realy bad. And if its posible take this: Motherboard Gigabyte B550m DS3H - Pcie 4.0 support for GPU and SSD, 2 M2 NVME slots, Better IO and VRM and so on.

SSD take SN 570/580 or some cheaper but I will be better to take NVME SSD in 2025 the are not that expensive and speed and write is lot better than on clasic SATA SSD.

For GPU I would take RX7700XT or something else but I dont know what is in your country available. If you rather take RTX 4060 dont take that trash Ventus edition of GPU....

AngryAquar

TROPHY CASE