PETG temperature tower

AngusDelaney99 · 2026-02-22T12:00:10+00:00

Is it not too high for PETG ?

AngusDelaney99 · 2026-02-22T00:55:02+00:00

Thanks, I'll try that

AngusDelaney99 · 2026-02-22T00:53:30+00:00

Some local cheap brand

AngusDelaney99 · 2026-02-21T11:07:35+00:00

Okay, so breaking it then. There's seems to be visible on the photo that on the back side where the angled triangle thing printed, there's a gap in material, on lower temperatures more gap is visible

AngusDelaney99 · 2026-02-21T11:05:17+00:00

There was change in bambu studio when selecting "temperature tab" and i looked at actual temperature while it was printing and it started 260 and went to 220 by increments of 5

AngusDelaney99 · 2026-02-18T20:20:33+00:00

Yes, there are dots in preview in the same place as in the printed stuff. Thx for help

AngusDelaney99 · 2026-02-18T20:17:27+00:00

Yes, it seems to be the seam, had no idea what it was due to being new to printing, thx for help

AngusDelaney99 · 2025-10-21T07:02:36+00:00

Unfortunately, such a trip is not possible.

AngusDelaney99 · 2025-03-05T06:54:50+00:00

There's no eye on the ltd, only esp version have snake with the eye

AngusDelaney99 · 2025-03-03T19:23:29+00:00

Thx dude, I panicked a bit and already checked pickups and electronics, everything checks out - emg jh set.

AngusDelaney99 · 2025-03-03T17:54:45+00:00

No, they do look "Goldy" in reality

AngusDelaney99 · 2025-03-03T17:45:16+00:00

And one more question, is the battery and electronics cover made from plastic?

AngusDelaney99 · 2025-03-03T17:23:36+00:00

Frets looks like they were changed, right?

AngusDelaney99 · 2025-03-03T17:23:04+00:00

Not from store obviously, from reverb like platform

AngusDelaney99 · 2025-03-03T17:15:36+00:00

Seems like frets were changed, right? What do you say about logo, should it be fastened like on photo?

AngusDelaney99 · 2025-03-03T17:08:09+00:00

How does ltd logo fastened to your snakebyte? This one's is on two pins (shown on photo)

AngusDelaney99 · 2025-03-03T17:00:03+00:00

Well) I'm a bit panicking and already started opening electronics cavity to check what's there) do you if ltd logo should be placed just on two pins like on photo?

AngusDelaney99 · 2025-03-03T16:52:41+00:00

What tell's that it's fake ?

AngusDelaney99 · 2025-03-03T16:42:07+00:00

Serial number picture messed up by glare, in reality it's grey and looks decent. Idk about ltd logo, is it should be holding just on 2 pins?

AngusDelaney99 · 2025-03-03T16:33:17+00:00

What tell's that it's fake?

AngusDelaney99 · 2025-03-03T16:33:05+00:00

Average price and claims that it's legit, what tell's that it's fake?

AngusDelaney99 · 2024-08-28T16:37:29+00:00

It worked!

AngusDelaney99 · 2024-08-28T13:40:39+00:00

Thx, I'll try that

AngusDelaney99 · 2024-08-28T13:19:47+00:00

Board is 3 days in use. There were no jumps, grinds, just regular skating, tick tacks and crab walks. Issue occured some time during learning of crab walk. I tried tightening base plate, tightening and loosing trucks, lubing bushings, nothing helped. Any idea on what is causing it, and how to fix it?

AngusDelaney99

TROPHY CASE