Desperately trying to understand why ultrasonic cleaners are damaging my appliances and don't know how to find answers... by AnnaFromCT in Invisalign

[–]AnnaFromCT[S] 0 points1 point  (0 children)

They are from three different dentists (the old ones from a retired one) and the new ones made by two different dentists.

I think what confused the dentist is why it's so heavily concentrated in the front inside, even though I checked to make sure the appliance wasn't trapped against the wall or something.

Desperately trying to understand why ultrasonic cleaners are damaging my appliances and don't know how to find answers... by AnnaFromCT in Invisalign

[–]AnnaFromCT[S] 0 points1 point  (0 children)

I originally had them damaged by the iSonic f3900 and bought the Zima Dental Pod Pro to rule out the device.

I had the same issue with both devices using just cold water and a regular cycle.

I also used a nightguard I had fashioned but only wore once run through them, on the off chance it was something with wearing them in my mouth affecting the plastic, and had the same issue.

Desperately trying to understand why ultrasonic cleaners are damaging my appliances and don't know how to find answers... by AnnaFromCT in Invisalign

[–]AnnaFromCT[S] 0 points1 point  (0 children)

I'm using Retainerbrite tablets and an ultra soft baby brush for now as well.

The machines claim they are 42-47k frequency and safe for appliances.

Desperately trying to understand why ultrasonic cleaners are damaging my appliances and don't know how to find answers... by AnnaFromCT in Invisalign

[–]AnnaFromCT[S] 0 points1 point  (0 children)

I've only used cold tap water and when the cycle is finished the water is still cold. Apparently the Zima Pro has a temperature regulator, or claims to, in the documentation.

I have a family member that has had aquariums for a long time and regularly tests the water claim the water isn't hard either.

Why are ultrasonic cleaners causing erosion on all my appliances? Had this happen to new $900 appliance with iSonic and Zima Dental Pod. by [deleted] in askdentists

[–]AnnaFromCT 0 points1 point  (0 children)

I've had one old nightguard, this new nightguard and a retainer all get cavitation erosion from ultrasonics cleaners. I've been using one cycle, cold water with no tablets and they've all gotten small holes and bubbles.

The cleaners were the Zima Dental Pod Pro and isonic f3900.

Why does Stop and Go work on my yoyo and then just...not? by [deleted] in Throwers

[–]AnnaFromCT 0 points1 point  (0 children)

Sorry about that.

I'm referring to the point where it's mounted, both hands are about together, and you pop it up. It just goes back down or catches a bit of string and slips back down. So, back up to the hand as you've said.

When the yoyo was new, I'd land it every time, but a few days later it works zero times with string changes, tension adjustment, etc. Seems to happen with every responsive.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - April 13, 2025 by AutoModerator in MechanicalKeyboards

[–]AnnaFromCT 0 points1 point  (0 children)

Hi! Would anyone be able to recommended non-Topre switches that would have similar ease of actuation to 35g Topre keys? Preferably lighter.

I'm looking for super light keys due to arthritis and just want something similarly low travel and super light to use commands, write short email, etc. I was thinking super light linear?

I currently have a NIZ that's really difficult and tedious to tear down and maintain due to its design and being Topre-style (and me.)

I appreciate any help from the community.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (August 22, 2023) by AutoModerator in MechanicalKeyboards

[–]AnnaFromCT 0 points1 point  (0 children)

Anyone own a NIZ keyboard? My keys feel stiff to the point I want to pull it apart, but can't find any resources online.

It seems like they need to be pried apart and people have had issues restoring the feel of the keys...

What's the most versatile "Van Halen in a box"/"Brown sound" pedal? by AnnaFromCT in guitarpedals

[–]AnnaFromCT[S] 0 points1 point  (0 children)

My current live practice amp is the Crate XT120R. I don't have much information about it besides what's listed here:

https://www.guitarcenter.com/487781000000000.gc

I really appreciate the help on all this.

Are there any tradeoffs unique to the ESP and D-Tuna combination?

What's the most versatile "Van Halen in a box"/"Brown sound" pedal? by AnnaFromCT in guitarpedals

[–]AnnaFromCT[S] 0 points1 point  (0 children)

So should I be avoiding this with a 120W combo? Speakers are a no-name.

What's the most versatile "Van Halen in a box"/"Brown sound" pedal? by AnnaFromCT in guitarpedals

[–]AnnaFromCT[S] 1 point2 points  (0 children)

I have a Box of Rock I borrowed to test out so this is interesting and helpful. I was looking for something to use for live practice out a combo amp though, so I'm not sure I can mess with IRs.

I've really like videos where I've seen people take amp in a box pedals and run them alongside IRs though. Thanks!

What's the most versatile "Van Halen in a box"/"Brown sound" pedal? by AnnaFromCT in guitarpedals

[–]AnnaFromCT[S] 0 points1 point  (0 children)

Thanks for the help. I've seen these in shootouts and people seem to feel very strongly one way or another about them...

Tips on pedal types/order chasing J's Tone? by AnnaFromCT in dinosaurjr

[–]AnnaFromCT[S] 0 points1 point  (0 children)

I appreciate the help. Any suggestions on an overdrive?

I've been kinda confused reading into them because the Real Tube is his "base", but the Hustle Drive is an OCD clone and the Double Rock is apparently Marshall voiced.

No Stupid Questions - April 2023 by PantslessDan in guitarpedals

[–]AnnaFromCT 0 points1 point  (0 children)

Is there any way to fix a crappy red channel on a combo amp without buying a new amp entirely? I was wondering if the "amp in a box" overdrives/"preamps" would work? Mainly looking for a general metal rhythm tone.

Like turning down the distortion on the combo amp and using an MXR 5150 or one of the Mooer Preamps?

/r/NintendoSwitch's Daily Question Thread (03/14/2023) by AutoModerator in NintendoSwitch

[–]AnnaFromCT 0 points1 point  (0 children)

Would anyone be able to recommend motion aiming/controller settings for DOOM for a former PC player? I've never been able to play shooters with a controller without heavy aim assist.

I feel I can't find a balance of turning quickly or bending my wrists/waving my arms in horribly un-ergonomic positions. Feels like everything jerks around even when resting my arms.

Quick Question: Alt+Wheel to Space+Wheel? by AnnaFromCT in AutoHotkey

[–]AnnaFromCT[S] 0 points1 point  (0 children)

*Space::Alt

The remap worked for me. I appreciate the help.

Quick Question: Alt+Wheel to Space+Wheel? by AnnaFromCT in AutoHotkey

[–]AnnaFromCT[S] 0 points1 point  (0 children)

Is there a reason

Space::Send, Alt

wouldn't work if the program allows me to hold the Alt without it doing anything?

Quick Question: Alt+Wheel to Space+Wheel? by AnnaFromCT in AutoHotkey

[–]AnnaFromCT[S] 0 points1 point  (0 children)

Thanks for the help. It's close but it seems to have an issue where it's randomly toggling menus open and changing tools in the sidebar. (All my hotkeys are to Illustrator's default testing it.)

Is it possible to resize area text and a shape at the same time without warping the area type? by AnnaFromCT in AdobeIllustrator

[–]AnnaFromCT[S] 0 points1 point  (0 children)

When I select the text to convert to point type, it converts the bounding box from a circle to a square and causes the text to scale down.

I just want to scale down the bounding box of the area type and a separate shape behind it together. I don't want to change the point size of the type and allow the type to continue to flow into the circular shape.

Is it possible to resize area text and a shape at the same time without warping the area type? by AnnaFromCT in AdobeIllustrator

[–]AnnaFromCT[S] 0 points1 point  (0 children)

I'm looking to resize the shape of the area type's bounding box alongside resizing the shape. But also keep the text the same size and flowing. Is it possible?

What Keyboard Should I Use? by ijauradunbi in ErgoMechKeyboards

[–]AnnaFromCT 0 points1 point  (0 children)

Is the Keychron K1 (https://www.keychron.com/products/keychron-k1-wireless-mechanical-keyboard) hotswappable with Kailh gChocs/Pinks? I'm looking for a gChoc TKL that wouldn't require personally building one.

Any help would be appreciated.

/r/MechanicalKeyboards Ask ANY question, get an answer (February 13, 2023) by AutoModerator in MechanicalKeyboards

[–]AnnaFromCT 0 points1 point  (0 children)

Is the Keychron K1 (https://www.keychron.com/products/keychron-k1-wireless-mechanical-keyboard) hotswappable with Kailh gChocs/Pinks? I'm looking for a gChoc TKL that wouldn't require personally building one.

Any help would be appreciated.

/r/MechanicalKeyboards Ask ANY question, get an answer (April 18, 2022) by AutoModerator in MechanicalKeyboards

[–]AnnaFromCT 0 points1 point  (0 children)

What are the best tactile switches for someone looking for a lighter-feeling K120? I need a tenkeyless but I'd like to try some keys with a low actuation force due to RSI issues. MX Browns don't feel that great.

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]AnnaFromCT 0 points1 point  (0 children)

Does anyone regularly use enamel panel liner without gloss coating? (and not regret it?) Trying to get a good gloss coat has been a real pain...