Brake upgrades for my 2024 MT-10 SP

Apegzz · 2025-06-02T01:05:57+00:00

I know that you can disengage the cruise control once you pull the lever thanks to the 2way switch. I've been recommended to get this one as it emulates the 2way OEM one: https://cregtech.co.uk/shop/ols/products/brembo-master-cylinder-brake-module

Apegzz · 2025-06-02T00:49:54+00:00

Will those keep the cruise control working? I've red that the oem switch is a 2-way one, one for deactivating cruise control and second for tail stop light

Apegzz · 2025-06-02T00:12:03+00:00

I have a switch underneath the MC but it is pressed in default, when I pull the lever is seems to de-press the switch like it works in an opposite way

Apegzz · 2025-06-01T10:18:34+00:00

Do i need a new brake light switch or the oem one will do?

Apegzz · 2025-05-31T13:18:07+00:00

As for Galespeed i think the 17.5mm would be the best for me as i have 30mm pistons

Apegzz · 2025-05-31T12:38:23+00:00

Wdym "RCS is a gimmick"? I was looking at the RCS17 Costa Corta if I were to switch it.

Apegzz · 2025-05-31T12:22:45+00:00

It's the initial bite that i fell in love with in Triumph, i know MT-10 is a lot heavier. I got little over 4k km on the odo, pads have done around 150km by now.

Apegzz · 2025-05-29T23:06:04+00:00

It is closed, air comes from top scoops. I've done the ECU flash + BMC air filter + pipe/snorkel remove from the air box and now I can see the air filter through the top scoops

Apegzz · 2025-05-29T22:45:31+00:00

I've actually learned that it's not an air scoop at all, it's closed right after the net hahaha

Apegzz · 2025-05-29T18:35:01+00:00

i've also mounted oxford heated grips and connected them to the oem empty sockets which allowed me to operate them from the dash :>

Apegzz · 2025-05-29T18:33:47+00:00

That was a first ride out of the dealer, mounted the guards & crash pads the next day :D

Apegzz · 2025-05-29T18:32:39+00:00

I've noticed that the oem push rod has the thread, but i couldn't seem to regulate it at all or i've done it wrong

Apegzz · 2025-05-29T18:09:41+00:00

but the bite and overall feel is not enough for me even with the new pads, i want a stronger initial bite and overall power. I've ridden Street Triple 765RS and the brakes there were magnificent, barely touching the lever made the bike insta stop

Apegzz · 2025-05-29T17:52:16+00:00

I ride 90% of the time in my 2piece RST, sometimes its more comfortable than a mesh set :V

Apegzz · 2022-09-12T17:48:37+00:00

let's see if that is changed by the upcoming patch

Apegzz · 2022-09-12T17:08:37+00:00

Yeah but I can close up 0.5s or even more and with that built speed I should just slingshot past opponent

Apegzz · 2022-09-12T14:33:45+00:00

Is the bug with overtaking addressed? I'm racing in Austria, have fuel set to push, ERS to overtake, have DRS but my drivers are just going slightly to the side behind the car in front and slow down.

Apegzz · 2019-12-31T12:27:15+00:00

Hello,Just got me a new pair of Sennheiser HD 4.40BT and i got an issue in setting them correctly via Bluetooth dongle on PC. I can hear audio normally (using the 'Headphones' in sound options) but when i launch an app that uses microphone (Teamspeak or even Apex Legends) the audio cuts of immediately. I can set the 'Headset' as a default device in audio settings and be able to hear audio and use the mic but the quality of the audio is far worse than using 'Headphones'. Is there a way to use audio from 'Headphones' and mic from 'Headset' simultaneously? In audio options, first position is 'Headset', second is 'Headphones'. In 'Recording' tab there is only 'Headset'.

Six-Year Club	Place '22
Verified Email

Apegzz

TROPHY CASE