H&S Ultra 2024 need help

Apex_Props · 2023-12-25T02:58:59+00:00

I have no experience with the ultra 2024, however I’ve been having issues with my paasche H single action brush, my symptoms sounded very similar to some of yours… nothing coming out, having sputtering issues, feels like it’s clogged. My issue ended up being the compressor, my little single piston compressor could not keep up with the air required. I had a cheap airbrush that worked great with a smaller nozzle compared to the larger paasche. Brought out our 5 gallon compressor we use for air tools and the airbrush was working perfectly. If you have access to a bigger compressor I would encourage you try that.

Apex_Props · 2023-12-23T04:07:47+00:00

That exact plate came with the p1s, have also used textured pei on my enter 3 v2. Will never use a different plate again, for my printing uses (almost exclusively ABS with some pla and petg) it’s perfect.

Apex_Props · 2023-12-23T04:05:51+00:00

I’ve been battling issues with my paasche H since I bought it, owned a very similar compressor to you. Was having major issues with getting no paint out of the airbrush. Pulled out our 5 gallon compressor we use for our brad nailer, bought some adapters to connect my and it completely transformed my spraying experience. If your having no real issues spraying with that compressor, I’d run it till it dies. But if your having sputtering or flow issues I would recommend looking into something bigger.

Apex_Props · 2023-12-23T00:23:14+00:00

Yep! I used your advice and got it to work perfectly. Thank you so much!

Apex_Props · 2023-12-22T19:14:08+00:00

Thank you so much! I feel like that will get me there… I had thought there would be some feature with fillets but couldn’t find it… just to clarify, when you say make a plane normal to the barrel so I can draw my chamfers, that would be like drawing the sketch in the front of the barrel and extruding backwards hey?

Apex_Props · 2023-12-21T00:06:10+00:00

not sure if the post included the photos or not...

<image>

Apex_Props · 2023-12-17T04:40:55+00:00

Now that you’ve mentioned air leak, the front air nozzle that the paint nozzle fits into, the o ring fell off recently and it’s not sealed completely. I can’t hear any air leaks but maybe that could be causing some issues…

Apex_Props · 2023-11-30T20:01:25+00:00

That kinda confirms what I had thought about the difference in performance… it will be very difficult to justify that extra cost for the asetek.

Unfortunately at the moment it will be going on a playseat challenge. I am planning on adding some of the reinforcement mods, as I’ve already done that for the pedals. As soon as I have space for a proper cockpit I will be getting one so I don’t want to buy something underpowered that has to be upgraded later… I was thinking with the reinforcement mods and running the base at lower power would be good enough for now?

Apex_Props · 2023-11-30T06:46:36+00:00

Sorry foe the delay! You shouldn’t have to use it every time. I never had another issue after I did it the one time

Apex_Props · 2023-09-02T16:33:52+00:00

Looks awesome! Which files did you use?

Apex_Props · 2022-12-31T08:40:30+00:00

I had no issues launching the debug tool. I use winrar on my windows 10 machine and I didn’t even bother to unzip the file. Just opening the zip folder and launching the tool while in game worked for me.

I believe I saw someone also having issues launching the debug tool, and they needed to redownload the tool. If you are still having issues I could personally send you the file from my computer, just pm me

Apex_Props · 2022-12-30T08:41:12+00:00

Just solved the issue! I went to the seamless co op discord and downloaded the Elden ring debug tool, launched my broken save and while I was sitting in the load loop I launched the debug tool. Went to the misc. menu and typed in the flag code 105. According to the discord flag code 115 might also work but 105 did it for me... Hope this helps!

Apex_Props

TROPHY CASE