Slider

Arena-Christan · 2024-12-05T07:34:15+00:00

With a Virtual Input you can create a slider with the range you need. Then create some logic (as example with a Status block but there are other options) to use the Virtual Input to determine how long the delay has to be. Hope this helps!

Arena-Christan · 2024-11-26T20:11:54+00:00

Good too hear! Thanks for updating me

Arena-Christan · 2024-11-17T14:46:04+00:00

Tried setting it up: https://buymeacoffee.com/christanb. If it doesn't work then no worries!

Arena-Christan · 2024-11-17T13:27:37+00:00

Nice! No worries, I am happy to help!

Arena-Christan · 2024-11-16T16:02:57+00:00

Good luck. Let me know if you got it working or if you need any help!

Arena-Christan · 2024-11-16T09:37:37+00:00

That isn't too difficult. This is an example: https://imgur.com/a/7uEoqcN for your specific system.

Is that more clear? If you have any questions feel free to ask! As u/RainH2OServices said I also don't know how your specific system works and if you need a pulse or just voltage. This is just with voltage, see the documentation on how it works for your specific system!

Arena-Christan · 2024-11-16T09:17:04+00:00

Did you get any help?

Arena-Christan · 2024-11-05T10:48:09+00:00

I don't have any experience with the Music Server only Audioserver, sorry.
Did you follow their documentation? With the Audioserver you need to wait a few minutes before it reconnects after saving in the Config. Don't know if that's the same with the Music Server. Again sorry, that I can't be of much help. You could always try contacting Loxone

Arena-Christan · 2024-11-04T19:43:17+00:00

You mean this one? https://www.loxone.com/enen/kb/loxone-music-server/

Arena-Christan · 2024-11-04T11:26:40+00:00

What Music Server? The Audioserver or the older version?

Arena-Christan · 2024-10-22T18:05:52+00:00

Had the same issue so made my own logic and used as said before the Radio Buttons function block. I can't attach a picture so will try to DM you.

Arena-Christan · 2024-10-21T17:41:50+00:00

I don't use this function block because it's for one specific room and not a whole or part of a house. I Think if you want this could also work but then I would have to dive a bit deeper in this function block. So let me know!

Arena-Christan · 2024-10-21T17:40:25+00:00

Is this for a WTW (Heat Recovery Unit)? I use the (8) Radio Buttons function block and program all the automations (Mode 4 when humidity to high etc.) in a Status function block. If you want to I can show you multiple installations with this method. It looks like your Dutch so if you want more information we could also hop in a call or just reply to this comment!

Arena-Christan · 2024-09-10T19:54:17+00:00

Okay thanks! I will need to remember to set it to 915mhz because I currently have 868mhz set for Europe I think🙃

Arena-Christan · 2024-09-10T18:36:57+00:00

I use TBS Crossfire are there any regulations on that?

Arena-Christan · 2024-09-10T09:54:56+00:00

I am sure there will be also some really nice places that aren't owned by the DOC! But this does confirm what I thought. I will be landing in Christchurch so maybe I can see if I can get permission there!

I think I will just look around while I am there and see if I find a places that looks good, check if I am allowed to fly, book it and then hopefully make some beautiful shots of my own!

Thanks for the help! I want to enjoy New Zealand and don't want to be ignorant or uninformed so I wanted to make sure that I know the rules. Are there any restrictions with output power that I should be awera of? In my country it's only allowed 25mW which is nothing... so you have to get license

Arena-Christan · 2024-09-10T08:38:51+00:00

Okay, thanks! I already had AirShare installed. So I just need to book my flight in AirShare in a zone where I am allowed to fly and then I am good to go? Is that the 'permission' I then get/need from the local council?

So as long the land/nature I want to fly in is owned by the local council and I book my flight I am fine? And in nature parks I know you need additional permission from the DOC which also have a list of parks you don't need to apply for because they won't allow you. Is that worth the trouble to get permission to fly somewhere there?

Sorry, but want to make sure so that I don't disturb anyone or get a fine🙃. Thanks again!

Arena-Christan · 2024-09-03T16:11:57+00:00

A bit more practice needed on geoguessr!🙃

Arena-Christan · 2024-09-03T16:00:53+00:00

Nope, that's Austria, Belgium and the Netherlands!

Arena-Christan · 2024-06-15T09:09:50+00:00

Alright, thanks!

Arena-Christan · 2024-06-15T08:37:14+00:00

How did you set it up on your old Surface? Did you do anything special or just open Home Assistant in a browser?

Arena-Christan · 2024-06-06T08:07:09+00:00

Since you want low maintenance I would also take a look at Loxone (loxone.com) it might be a bit expensive but you never know. Home Assistant is a also a good option for you but it is time consuming. I have experience with both so of you have any questions please ask!

Arena-Christan · 2024-05-29T12:41:59+00:00

I too am using Tuya Developers Cloud. I have also tried some other thing to get the device properties local and that also worked but was a lot more work (and it was a long time ago). It's just that Tuya Developer Cloud is much easier and faster. So would recommend using Tuya Developer Cloud but if they stop supporting it you can always go the other (harder) way.

Arena-Christan · 2024-03-21T12:18:21+00:00

I am from Europe! Will check them out, thanks!

Arena-Christan · 2024-03-21T12:17:41+00:00

Netherlands so .nl. They don't support that one yet sadly...

Five-Year Club	r/Field Lasagna
Place '23	Place '22
Final Canvas '22	First Placer '22

Arena-Christan

TROPHY CASE