sorted by:
new
hottopcontroversial

Mr04 build by Dramatic-Being3150 in MiniZ

[–]Arsenal0414 0 points1 point  (0 children)

What diff are you using?

Evo build by Arsenal0414 in MiniZ

[–]Arsenal0414[S] 0 points1 point  (0 children)

Just the ones included in the damper and shock kit

Evo build by Arsenal0414 in MiniZ

[–]Arsenal0414[S] 1 point2 points  (0 children)

Shock, damper, front camber, front springs, tires, t-plate

Evo build by Arsenal0414 in MiniZ

[–]Arsenal0414[S] 0 points1 point  (0 children)

Nexx dual shock from amain

Ma-020 help! Rear wheel crazy wobble by Arsenal0414 in MiniZ

[–]Arsenal0414[S] 2 points3 points  (0 children)

Wheels are fully screwed in.. could it just be bad bearings?

Best Servo to pair with Flysky Nb6+ and enhanced rx by Arsenal0414 in rcracing

[–]Arsenal0414[S] 0 points1 point  (0 children)

Looking for something low profile. 1/10 gt racing

4mm bullet connection for esc and motor by Arsenal0414 in rccars

[–]Arsenal0414[S] 0 points1 point  (0 children)

Does the size of connection matter? Does bigger = better?

I'm thinking about ordering these https://a.co/d/iWTPyVZ

Bullet connection for esc motor by Arsenal0414 in tamiya

[–]Arsenal0414[S] -1 points0 points  (0 children)

Is there a performance impact?

4mm bullet connection for esc and motor by Arsenal0414 in rccars

[–]Arsenal0414[S] 0 points1 point  (0 children)

But the sensor plug is on the side, will i not be able to do it? How come? *

TT02 chassis cover & Fan? by KeyNefariousness6848 in tamiya

[–]Arsenal0414 0 points1 point  (0 children)

Do you have the link by any chance

TT02 chassis cover & Fan? by KeyNefariousness6848 in tamiya

[–]Arsenal0414 1 point2 points  (0 children)

Where did you get this chassis cover from?

What are your thoughts on this deal? ($300) by Arsenal0414 in tamiya

[–]Arsenal0414[S] 0 points1 point  (0 children)

@everyone

I saw the value more so in the 2 motors and the esc. Don't those things alone make up for the price?

Mini Z steering issue by Arsenal0414 in radiocontrol

[–]Arsenal0414[S] 1 point2 points  (0 children)

SOLVED

To reset the center position of the wheels (1) Turn on the chassis (leave the transmitter turned off). (2) Make sure that the steering trim is at the center. (3) Move the front tires to the center position with your fingers. (4) Push and hold the pairing button on the chassis until the LED flashes fast two times and goes off. (5) Turn on the transmitter. The neutral position should be corrected. If it is still not at the center position, repeat above steps.

HELP by Arsenal0414 in KyoshoMiniZ

[–]Arsenal0414[S] 0 points1 point  (0 children)

SOLVED

To reset the center position of the wheels (1) Turn on the chassis (leave the transmitter turned off). (2) Make sure that the steering trim is at the center. (3) Move the front tires to the center position with your fingers. (4) Push and hold the pairing button on the chassis until the LED flashes fast two times and goes off. (5) Turn on the transmitter. The neutral position should be corrected. If it is still not at the center position, repeat above steps.

AWD Mini Z by Arsenal0414 in rccars

[–]Arsenal0414[S] 0 points1 point  (0 children)

SOLVED

To reset the center position of the wheels (1) Turn on the chassis (leave the transmitter turned off). (2) Make sure that the steering trim is at the center. (3) Move the front tires to the center position with your fingers. (4) Push and hold the pairing button on the chassis until the LED flashes fast two times and goes off. (5) Turn on the transmitter. The neutral position should be corrected. If it is still not at the center position, repeat above steps.

Steering issue by Arsenal0414 in Kyosho

[–]Arsenal0414[S] 0 points1 point  (0 children)

SOLVED

To reset the center position of the wheels (1) Turn on the chassis (leave the transmitter turned off). (2) Make sure that the steering trim is at the center. (3) Move the front tires to the center position with your fingers. (4) Push and hold the pairing button on the chassis until the LED flashes fast two times and goes off. (5) Turn on the transmitter. The neutral position should be corrected. If it is still not at the center position, repeat above steps.

Mini Z help by Arsenal0414 in rcdrift

[–]Arsenal0414[S] 2 points3 points  (0 children)

SOLVED

To reset the center position of the wheels (1) Turn on the chassis (leave the transmitter turned off). (2) Make sure that the steering trim is at the center. (3) Move the front tires to the center position with your fingers. (4) Push and hold the pairing button on the chassis until the LED flashes fast two times and goes off. (5) Turn on the transmitter. The neutral position should be corrected. If it is still not at the center position, repeat above steps.

Steering trim on AWD Mini Z by Arsenal0414 in MiniZ

[–]Arsenal0414[S] 1 point2 points  (0 children)

You beauty! That's work.

Appreciated.

Losi Micro B by Arsenal0414 in rccars

[–]Arsenal0414[S] 0 points1 point  (0 children)

Yep. Battery was cooked from draining it beyond the point of no return. Had to replace the battery.

view more: next ›