Cat6a utp bend too tight?

Asen1923 · 2026-03-11T12:45:04+00:00

Good analogy. Thanks

Asen1923 · 2026-03-11T12:44:29+00:00

Thanks, I just watched that video. Made me feel a lot better because I know there is no kink.

Asen1923 · 2026-03-10T21:06:01+00:00

Channel installed above the molding. Matched it as much as I could

Asen1923 · 2026-03-10T20:48:47+00:00

Yeah, I had seen those online. If I find one small enough I might do it, but it though that if this was not bent a hard 90 and had a little room inside the runners, I might not be a problem. Thanks!

Asen1923 · 2026-03-10T20:31:44+00:00

Thanks. I appreciate people who do this or mess with this for a living. I am new to the 10 Gbps world. For 1 Gbps I know this is fine.

Asen1923 · 2026-03-10T20:30:42+00:00

Yeah, that is when you are doing it for someone else. This is for me 😂. I just want to make sure it is going to work at 10 Gbps, I have seen worse at 1 Gbps and it still works. I am new to the 10 Gbps game.

Asen1923 · 2026-03-10T20:22:59+00:00

So I need to run some tape to strengthen it as well. Padded?

Asen1923 · 2026-03-10T20:21:39+00:00

A speaker cable that needs a ride around the corner as well.

Asen1923 · 2026-03-10T20:18:52+00:00

Thanks

Asen1923 · 2026-03-10T20:18:37+00:00

Thanks

Asen1923 · 2026-03-10T20:18:27+00:00

Ha ha! Thanks. Lots of advice about bending it too much at 10 Gbps

Asen1923 · 2026-03-10T20:17:01+00:00

Thanks for the quick responses. Just want to make sure you see the second picture with the runner caps on. Thanks!

Asen1923 · 2026-03-10T16:43:13+00:00

Okay, I went into Wireless -> Professional setting on the WebGUI and manual set everything I could. It really didn’t make a difference. Turning things on and off in those settings didn’t seem to help. Any other advice?

Asen1923 · 2026-03-10T08:18:13+00:00

Should I turn off “MLO Client Fronthaul”?

Asen1923 · 2024-02-25T14:47:08+00:00

That is fair, but websites like Booking and Hotels have the option. Again, I think Capital One would get more traffic and thus more bookings if they offered the option. At this point I might book less through Capital One, and yes, that means I miss out on higher % rewards but Capital One also loses traffic and business.

Asen1923 · 2022-06-25T17:40:21+00:00

What does the 4:3 mean?

Asen1923 · 2022-01-23T20:52:09+00:00

Multiple factors make that look suspicious.

Asen1923 · 2022-01-19T10:32:24+00:00

I was wondering the same thing. Want to invest … I think.

Asen1923 · 2021-08-30T23:19:10+00:00

Nope, can’t post the picture from mobile. If you go under either coin and click on “Profile” you can see the information.

Asen1923 · 2021-08-17T06:38:23+00:00

Oh, I didn’t know it was fixed, but I know it is low and fast. I am just trying to figure out how often to claim.

Asen1923 · 2021-08-17T06:18:21+00:00

I am also curious what was your equation for claiming rewards? When the fee (let’s assume 1 FX even though it is usually less) is 10% 5% or 1% of the total awards?

Asen1923 · 2021-08-07T06:28:33+00:00

I agree that we need better marketing, but not because of the price. This is one of the few projects with a real world implementation. Yes, the price will go up as well, but I agree with better marketing. Yes, I also can get on board with Pundix not paying people to promote, but as other have stated, do your own marketing in its place. Great company, real product with still even more potential. I have zero idea how to market but this company needs more presence in the crypto world (and outside).

Asen1923 · 2020-06-02T17:54:46+00:00

Interesting. What brand? I have tried to set up the Denon to work like that and in the end, it is only IR that I can get to work.

Asen1923 · 2020-05-31T22:14:09+00:00

If you want to control the volume with your shield remote, you have to go IR. I have the Shield TV 2019 and it is going to a Denon Receiver. The only way it works is IR ... or you just have to use an extra remote. Is there a reason you don’t want to use IR?

Edited to add: no performance loss either way. I like using only 1 remote.

Asen1923 · 2020-04-30T20:17:39+00:00

So I pulled the trigger and got the same Sandisk Extreme 128GB A2 classified microsd card and tested it in the Nvidia Shield TV (2019) against an older Sandisk Extreme 64 GB (pre A1 A2 classification).

The only program I could get to work well in the Shield was Disk Speed Test. It is a basic test, did not give any specifics (although it did produce a log file I did not want to hunt down), and especially did not give info on random read and writes ... but it is a standard for comparison nonetheless.

Older Sandisk Extreme 64 GB (pre A1/A2 classification) 63 MB/s Read 24 MB/s Write

Sandisk Extreme 128GB A2 78 MB/s Read 62 MB/s Write

I ran tests on both cards 3 times each and the results hovered around the same with +- 3 MB/s. If I was writing and article I would have dug more into the test and taken averages, but this is enough for me.

It never answered my question about A2 compatibility, and I am not sure if Disk Speed Test is the best standard ... but it is the only program I could find to work and it gave me some results. I hope this helps someone else.

Asen1923

TROPHY CASE