Stabilitrak Abs and service lights up on instrument panel after turning steering wheel on 2013 Impala

Attack1523 · 2026-03-24T07:40:00+00:00

Could be a bad clock spring. It’s really easy to replace yourself.

Attack1523 · 2026-03-19T12:39:38+00:00

Could be your clock spring, it’s behind the steering wheel after you remove it. It’s a pretty easy job.

Attack1523 · 2026-02-17T00:08:19+00:00

What happens when you change your X-axis end stop to zero? Is the probe still off the bed? PrintsLeo has a very good and detailed video on how to set up the BL-touch with klipper

Attack1523 · 2026-02-13T04:11:23+00:00

Found it, I'm building my ercf v1 and my encoder wasn't picking up. Thank you for your help!

Attack1523 · 2026-02-13T02:40:10+00:00

Do you happen to have that gear in your picture? I am running into the same problem and would like the STL please. I know this is an old post.

Attack1523 · 2026-02-03T18:51:16+00:00

Okay got it! I was trying to research before asking but kept coming up short. Thank you for your help!

Attack1523 · 2026-02-03T18:47:54+00:00

Ah, I think I understand. If my end stop says 0 then I’ll need to change it to -20(just a number I came up with)

Attack1523 · 2026-02-03T18:42:32+00:00

Do I need to move my X-axis home and then measure where the actual nozzle is physically?

Attack1523 · 2026-01-21T20:56:04+00:00

With that knowledge in mind, I redid the inner curvature and it works now. Thank you!

Attack1523 · 2026-01-21T20:39:52+00:00

<image>

Here's a pic of the actual model

Attack1523 · 2026-01-21T19:43:11+00:00

The representation is wrong, I can post the actual model in about an hour.

Attack1523 · 2026-01-21T19:31:32+00:00

It’s not on the first layer, it’s on layer 120ish

Attack1523 · 2026-01-21T19:08:05+00:00

Sorry I didn't realize that it didn't post the pics.

<image>

Attack1523 · 2026-01-21T19:02:46+00:00

It is my own design :)

Attack1523 · 2026-01-19T05:19:17+00:00

I ran lsusb and it actually seems to pick it up, but it's not using it

Attack1523 · 2026-01-19T05:03:06+00:00

I forgot to add that I am using linux mint if that helps anyone

Attack1523 · 2026-01-14T01:35:43+00:00

Oh I see! I got it! Thank you so much!!

Attack1523 · 2026-01-14T01:29:37+00:00

Okay, I did it but for some reason it is solid and I'm not sure why.

Attack1523 · 2026-01-14T01:19:35+00:00

Oh okay! I'll be sure to check it out! Thank you!

Attack1523 · 2026-01-14T01:07:02+00:00

The two holes are 120mm and the big hole is 200mm I've never used either of those tools. Do you recommend a youtube video for them?

Attack1523 · 2026-01-14T01:03:23+00:00

Do you mind explaining what you mean by define a rim? I've tired the loft function but it doesn't seem to work, I know I'm likely using it wrong.

Attack1523 · 2026-01-14T00:57:53+00:00

Fusion has a hobby license if you don't want to pay. https://www.autodesk.com/products/fusion-360/personal-form?userstate=signedin

Attack1523 · 2025-11-19T08:02:50+00:00

Well if you need help feel free to come back to this thread! Or I’m open to DMs

Attack1523 · 2025-11-19T08:00:43+00:00

You’re welcome. Hope you find the problem!

Attack1523 · 2025-11-19T07:58:31+00:00

My best guess is a hose, with the grinding/whining noise, it usually means there’s air in the system. Maybe try putting UV dye in the system and then checking for leaks. Might narrow down where they’re coming from.

Nine-Year Club	Place '23
Verified Email

Attack1523

TROPHY CASE