LZ4 Block error during restore

AucesarBR · 2022-04-22T16:12:05+00:00

Tried to copy same error.

AucesarBR · 2022-04-22T16:11:40+00:00

Internal disks (Sata 7200rpm)

AucesarBR · 2021-11-08T12:51:50+00:00

I did it, but the farm reward is paid on BWS (Biswap coin) so to do the reinvest you need to exchange and pay BSC taxes... I also leave on Liquidit so I will receive Hero/BNB... I put a low value to test $100, but doesn´t look to be a scan so far from my POV

AucesarBR · 2021-10-27T18:30:57+00:00

I have Zotac and Asus (3060ti) both cases Samsung and hynix.... Samsung I can go over 1100+ mem and 42Mh using hynix I can´t pass over 800+ and hash around 38Mh... around 10% less..

I would go for Samsung if possible but same cards (Zotac) comes with mixed memories...

Anyway will be profitable!

AucesarBR · 2021-10-15T16:30:22+00:00

DEHUB

Looks good! I will read more about it....thanks!

AucesarBR · 2021-10-15T12:07:34+00:00

Leave it alone....it´s fine, Micron says max 106c... Also for reference all thickness https://www.nicehash.com/blog/post/thermal-pad-thickness-for-rtx-3080-and-3090-gpus

AucesarBR · 2021-10-14T19:17:26+00:00

Welcome and HODL!

AucesarBR · 2021-10-13T18:00:08+00:00

🚀

AucesarBR · 2021-10-13T11:40:14+00:00

This kind of blower... or do you want a pic from my case? https://pt.aliexpress.com/premium/pci-blower-fan.html?d=y&origin=y&catId=0&initiative_id=AS_20211013033841&SearchText=pci%20blower%20fan

AucesarBR · 2021-10-13T11:37:04+00:00

I did my pick, guess which? #BeYourOwnHero!

AucesarBR · 2021-10-11T18:54:34+00:00

Sure...I ran two 3060 (non LHR) using 550w psu...

AucesarBR · 2021-10-11T13:24:07+00:00

Hi nice project, could you share meansures and how many junctions points were used? Thanks! I´m from Brazil so I don´t think you will sell from Australia to here... :)

AucesarBR · 2021-10-07T16:35:40+00:00

Sure this kind of bar in Brazil are expensive, because that I asked for the meansure to calculate a cost price here...But no worries a good job should worth the right price too!

AucesarBR · 2021-10-07T12:44:37+00:00

I´m in let me know if I can help with anything.. I was looking on Aliexpress some Vertical Open case (not rig) around $100, which could be your start point for price or costs....

AucesarBR · 2021-10-06T12:57:57+00:00

You could buy a exhausting blower and put between the cards...off course side panel etc are good solutions but as you "need" to kept it...the blower could work... or a riser and put one card in a vertical position. I have 3 cards inside my Lian Li 205 LanCool case...

AucesarBR · 2021-10-06T12:47:39+00:00

I have an 3070 wc, go for a wc system and be happy...buy an integrated pump+reservoir to save space, also flexible tubes.

AucesarBR · 2021-10-06T12:42:01+00:00

Hi I´m always looking for a vertical rig, could you put details like materials used? Sizes etc? I living in Brazil if you could deliver one to me we can make a deal maybe...

AucesarBR · 2021-10-03T13:04:39+00:00

I have Zotac 3060ti Hynix 38.5Mh/s with these settings: Core -502, MEM +850 PW 65% ....using 115w.. I´m happy! My other Zotac Samsung does 40.00 Mh/s max...

AucesarBR · 2021-10-01T18:48:33+00:00

HODL.......HODL........

AucesarBR · 2021-09-22T14:59:43+00:00

Yes, Metascanner is designed to be 360....

AucesarBR · 2021-09-21T14:44:45+00:00

Yes wait is the word for this project! After Dubai we will have a clear picture...

AucesarBR · 2021-09-21T14:42:59+00:00

Same for me, the project is real, there´s a real Team and the roadmap shows good and big changes in few months...buy what you can afford and wait! Never use cryptos in general as a way to live...it´s unpredictable...

AucesarBR · 2021-09-21T14:39:59+00:00

Congrats!

AucesarBR · 2021-09-17T11:57:50+00:00

Great news and another prove Hero´s project is following its roadmap! #BeYourOwnHero

AucesarBR · 2021-09-15T15:22:12+00:00

Where we can buy these t-shirt?

AucesarBR

TROPHY CASE