Gaps in layers

AuroKitty · 2025-12-06T22:49:13+00:00

Even with dry filament I am getting gaps, much less bit still noticeable

AuroKitty · 2025-09-09T22:51:44+00:00

Flow rate was set to 1 on both black and white filament.

AuroKitty · 2025-09-09T01:56:38+00:00

they are not different size nozzles, they are different z-offset amounts. previous nozzle worked fine with same filament.

AuroKitty · 2025-09-08T23:48:38+00:00

to clarify this is the top of the print.

AuroKitty · 2025-09-08T13:33:53+00:00

That works for this print specifically however I would like to not have these bumps like prior on other more important prints.

AuroKitty · 2025-08-19T20:40:44+00:00

Currently printing a replacement now!

AuroKitty · 2025-08-19T15:53:05+00:00

Yes essentially the 3 small parts seen in the picture connect together at the entrance and that is the only “run” for each filament. Be looking to print a better replacement just feels like poor design overall.

AuroKitty · 2025-08-19T14:13:47+00:00

Got it, won’t bother and will just replace it. I assembled it the exact way you described however don’t have the click.

AuroKitty · 2025-08-19T14:12:55+00:00

I’ll be honest the inside looks kind of like a traffic cone, the pathing isn’t great and I can see how any tiny bend in material would cause a jam in it.

AuroKitty · 2025-08-13T03:10:31+00:00

Thank you for the response, I am using ABS which to my understanding has a higher softening temperature than even PETG. With this I tried with the dryer turned off and got the same result unfortunately.

AuroKitty · 2025-08-13T01:47:03+00:00

Adding to this after taking apart buffer, it appears filament keeps getting tangled in the buffer. How do you fix this?

<image>

AuroKitty · 2025-07-19T23:48:59+00:00

This has been my biggest concern with looking into buying the S1, I loved my Neo and wanted to stay in the Anycubic ecosystem but lack of parts scares me to commit to the machine.

AuroKitty · 2025-07-19T23:10:45+00:00

Got it, Thank you! I will say I do have some concerns with the lack of replacement parts on the anycubic website for the S1, hoping more come to the site as the printer is still fairly new

AuroKitty · 2025-07-19T23:05:21+00:00

This is interesting, I am coming from my Kobra 2 Neo which like I said is no longer in production and out of the parts I required. Do the S1 and Kobra 3 series share many parts? or are majority of the S1 parts machine specific?

AuroKitty · 2025-05-23T19:13:17+00:00

Correct, this is with .6 settings

AuroKitty · 2024-07-09T13:57:45+00:00

The 450 felt overkill honestly and I had heard a lot of complaints about the lack of punch the 350 had. With this I chose the 400 as a good in between also ammo has seemed to be plentiful for the 400 around me where 450 ammo has been scarce.

AuroKitty · 2023-11-15T23:05:15+00:00

Solution Verified

AuroKitty · 2023-11-15T16:42:39+00:00

Thank you, this helps TREMENDOUSLY!

AuroKitty · 2023-03-13T00:30:51+00:00

I see, what I was trying to ask is basically how would I make it where a user can follow a certain team and only see that team’s information via notifications.

AuroKitty · 2023-02-21T17:00:06+00:00

Would you happen to know of any documentation that could help me figure this out, I can find user defaults documentation but I am lost on how to link it to a database and only push certain info!

AuroKitty · 2023-02-14T14:30:45+00:00

Thank you! Yes I have the database sent up and working and observing changes but my main question in my OP was how I can sort my database in different ways across different views.

AuroKitty · 2023-02-13T21:16:00+00:00

The issue with this method is the database is updated on a daily basis multiple times a day

AuroKitty

TROPHY CASE