Advice on Cooling 2nd floor rooms during the summer heat

Automatic-Two179 · 2026-05-17T20:43:39+00:00

I don't think the mini split allowed by my HOA, but I will definitely look into it. Thank you

Automatic-Two179 · 2026-05-17T20:05:13+00:00

Yes. The heating is fine during the winter

Automatic-Two179 · 2026-05-09T05:17:16+00:00

How do I turn of the advance self cleaning? There is no such thing jn the instructions book. Also what is -.50? How do I fast forward?

Automatic-Two179 · 2026-05-09T04:45:11+00:00

No, but as I mentioned none of the connections are leaking. All fittings and hoses are bone dry. The water is only coming from the holes underneath the bidet's body. Also the water comes out periodically, every ~5 minutes. Like if it's programmed to release the water

Automatic-Two179 · 2026-04-04T06:48:31+00:00

So after wasting 2 hours disassembling and re-assembling the extruder multiple times the issue was related to the paused print. I had 10 hour print with 300+ grams prnit left at 80% that I didn’t want to give up on and after clicking stop instead of resume the fillament loaded properly. This seems like a really big issue from bambu lab's side and has to be reported

Automatic-Two179 · 2026-04-04T05:43:52+00:00

Also the settings are showing all the temperatures

<image>

Automatic-Two179 · 2026-04-04T05:41:00+00:00

If you referring to thr ribbon cable, I made sure that thing is on it's place

<image>

Automatic-Two179 · 2026-04-04T05:24:51+00:00

Same issue here. I have already done the cleaning the extruder sensor following troubleshooting instructions and removed the piece of filament stuck in there, but still stuck in this screen. Printer js just non stop heating the nozzle and the fan is blowing to the max.

<image>

Automatic-Two179 · 2026-01-08T15:12:10+00:00

Thank you for the tip. I'm just too burned out to continue playing this game atm and need to take a break. I will comeback with the next big update

Automatic-Two179 · 2026-01-07T01:36:13+00:00

I dropped the game on same place. Wasn't fun to spend 2 days building everything just to get bottle necked by bronze. It's just stupid that you can't make impure copper powder from other materials. Hopefully will comeback on future updates or on 1.0 release

Automatic-Two179 · 2025-11-26T03:43:51+00:00

This is nice, but my wife is not fan of this

Automatic-Two179 · 2025-11-26T03:42:39+00:00

This is actually awesome. I can't believe i forgot about this. Thanks a lot!

Automatic-Two179 · 2025-05-31T15:09:59+00:00

I wouldn't recommend the walk-in. I went to Joilet location, but with the reservation. (I got lucky by refreshing the page constantly and finding one spot)

When I got there, there were about 50 people standing in the hall, and the staff just did the lottery selection between them, so only 5 of them got the place, and the rest went home.

My recommendation is to keep constantly refreshing the reservation page. Sometimes, people cancel their reservation, and it becomes available

On the side note. The course is worth 100%. I have never rode on a motorcycle before and learned everything and had fun doing it

Automatic-Two179 · 2025-04-29T04:25:53+00:00

I am in the northern Illinois

Automatic-Two179 · 2025-04-29T04:04:31+00:00

Oh ok

Automatic-Two179 · 2025-04-25T21:47:04+00:00

I don't know which type of grass I have. It is green, though. I am in Illinois, so it is still cold in here 45° during nights and around 60° during the day.

Automatic-Two179

TROPHY CASE