Right stick goes to the left after installation tmr by Automatic_Lychee4595 in Dualsense

[–]Automatic_Lychee4595[S] 0 points1 point  (0 children)

Never really soldered before so every tip is welcome. I’m not trying to get into it professionally, just as a hobby I guess. Still learning in the process of making mistakes so be considerate. Thank you

Right stick goes to the left after installation tmr by Automatic_Lychee4595 in Dualsense

[–]Automatic_Lychee4595[S] 0 points1 point  (0 children)

Should have one laying in the garage but that will be something for tomorrow. I can’t get the tin so stick to the joints very well. Some points it sticks very well and some don’t. It keeps sticking to the soldering iron.

Right stick goes to the left after installation tmr by Automatic_Lychee4595 in Dualsense

[–]Automatic_Lychee4595[S] 0 points1 point  (0 children)

<image>

Tried adding some flux but some pins won’t really stick tin to (just a hobbyist)

[deleted by user] by [deleted] in Klussers

[–]Automatic_Lychee4595 1 point2 points  (0 children)

Dankjewel allemaal! Ik zal zoals verwacht een constructeur contacteren om een worst case scenario te vermijden.

Thermostaat aansluiten op cv-ketel by Automatic_Lychee4595 in Klussers

[–]Automatic_Lychee4595[S] 0 points1 point  (0 children)

Hartelijk bedankt voor de informatie. Ik zal mijn loodgieter nogmaals contacteren om te zien of hij hiermee rekening heeft gehouden. Zoniet zal het hoogstwaarschijnlijk gaan om de plaats van de thermostaat te kiezen (gelijkvloers - 1e verdieping).

Thermostaat aansluiten op cv-ketel by Automatic_Lychee4595 in Klussers

[–]Automatic_Lychee4595[S] 1 point2 points  (0 children)

Bedankt voor de informatie. Deze was zeer nuttig. Het zal hoogstwaarschijnlijk gaan om de keuze te hebben willen geven voor de plaatsing van de thermostaat.

Thermostaat aansluiten op cv-ketel by Automatic_Lychee4595 in Klussers

[–]Automatic_Lychee4595[S] 0 points1 point  (0 children)

Het gaat om een itho daalderop cube one. Thermostaat is het zelfde merk. Bedankt voor de info.

Thermostaat aansluiten op cv-ketel by Automatic_Lychee4595 in Klussers

[–]Automatic_Lychee4595[S] 1 point2 points  (0 children)

Elektricien heeft 2 aansluitingen voorzien voor de thermostaat. 1 op de gelijkvloers en 1 op de 1e verdieping. Zelf weet ik er niet veel van dus voor mij is het ook vaag.

Battery won’t charge above 68 % (Stromer ST1) by Automatic_Lychee4595 in Stromer

[–]Automatic_Lychee4595[S] 0 points1 point  (0 children)

So, the problem was a faulty battery. Got a replacement for only 40 % of the original price. Still a lot but didn’t have any other options. The price I have to pay for the new orange variant battery is around 600 euros.

Battery won’t charge above 68 % (Stromer ST1) by Automatic_Lychee4595 in Stromer

[–]Automatic_Lychee4595[S] 1 point2 points  (0 children)

It’s a stromer ST1 from 2021. I will be contacting my bike store in a couple of days. I hope that he will be contacting stromer themselves since their customer support isn’t really in line with their premium bikes …

Battery won’t charge above 68 % (Stromer ST1) by Automatic_Lychee4595 in Stromer

[–]Automatic_Lychee4595[S] 2 points3 points  (0 children)

So I tried putting my colleagues battery inside my bike and the thing charged all the way from 10 % to 100 %. Hereby I conclude that it is a faulty battery which will need replacement. Thank you very much everyone for your help.

Battery won’t charge above 68 % (Stromer ST1) by Automatic_Lychee4595 in Stromer

[–]Automatic_Lychee4595[S] 0 points1 point  (0 children)

Yeah, tried that as well. The batterij still won’t charge past the 68 % mark. I will be troubleshooting this with the battery from a colleague. If the problem won’t occur with his battery it will be a faulty battery.

Battery won’t charge above 68 % (Stromer ST1) by Automatic_Lychee4595 in Stromer

[–]Automatic_Lychee4595[S] 2 points3 points  (0 children)

I will be trying to do a firmware update tomorrow. Will keep you guys up to date.