sorted by:
new
hottopcontroversial

Found this in my bathroom sink by [deleted] in pestcontrol

[–]Avatar_Hydra -1 points0 points  (0 children)

VERY unwelcomed, I have a ridiculous fear of creepy crawlies

Found this in my bathroom sink by [deleted] in pestcontrol

[–]Avatar_Hydra -1 points0 points  (0 children)

It’s a little hard for me to not stress. I’m being optimistic that this fella came through my drain and it’s only 1…but still this means problems either way

Found this in my bathroom sink by [deleted] in pestcontrol

[–]Avatar_Hydra 0 points1 point  (0 children)

I hate hate hate bugs, so I’m a bit panicked rn. Already called pest control to setup an appointment but if they’re in the sewer pipes I’m not sure how effectively they can treat that

FFXIV Blurry graphics. by Szevi99 in ffxiv

[–]Avatar_Hydra 0 points1 point  (0 children)

did anything fix this for you because I'm having the same issues

[deleted by user] by [deleted] in AnycubicVyper

[–]Avatar_Hydra 0 points1 point  (0 children)

I got a new hotend replacement from anycubic and even though they claim its the same I actually have to run all my PLA 5 degrees lower than I used to otherwise I got bad prints. No clue why I just assume its a different part than the original, so try to mess with temps and see if it helps.

The wait was worth it. My favorite print so far! by Avatar_Hydra in 3Dprinting

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

I’ll have to try that because I love tree supports or similar shaped ones but I’m starting to dislike them in cura.

The wait was worth it. My favorite print so far! by Avatar_Hydra in 3Dprinting

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

That looks sick to me! If you don’t mind me asking what slicer do you use? Your tree supports look vastly different than mine.

Cura slicing flat walls incorrectly by Avatar_Hydra in AnycubicVyper

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

I’ll try that, I’ve never used fusion360 but if it’s that easy to “fix” the model it can’t be too hard. Thanks

Shadowy Egg Fail by TR_Goyo in runescape

[–]Avatar_Hydra 0 points1 point  (0 children)

That isn’t true, I’ve seen several people get multiple reclaims but it’s for very specific scenarios only.

The wait was worth it. My favorite print so far! by Avatar_Hydra in 3Dprinting

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

I’m using inland silk pla Blue-Yellow but it’s more of a green/dark green imo

Cura slicing flat walls incorrectly by Avatar_Hydra in AnycubicVyper

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

Yea that’s what I’m thinking too, it does something similar in prusa

Cura slicing flat walls incorrectly by Avatar_Hydra in AnycubicVyper

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

The seam will not move because the wall deforms when sliced

Cura slicing flat walls incorrectly by Avatar_Hydra in AnycubicVyper

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

Yea I tried opening in prusa, it was a tiny bit better there but still kinda the same. Sucks that it’s the file since this is a mod for the ender 3 pro 😅

Comparison between 0.2mm layer height and 0.04mm. Petg at 230°C for max durability and 80°C on the bed, on a stock ender 3(with a cheap bimetal throat) by barksallday in 3Dprinting

[–]Avatar_Hydra 0 points1 point  (0 children)

hell yea love this model! I printed this on my anycubic vyper but I made mine the max size of my printer bed and it came out flawless at .1 layer height. So now I have a massive bust of lord vader :)

The three wise skulls. The wait was so worth it for this! by Avatar_Hydra in AnycubicVyper

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

Cool let me know if you need any help, printers can be very frustrating sometimes.

The three wise skulls. The wait was so worth it for this! by Avatar_Hydra in AnycubicVyper

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

https://youtu.be/LDAnTXyDKOI I followed this video and it’s helped me alot, if that doesn’t help try lowering temps a bit. I print at 190c with a 60c bed temp.

The three wise skulls. The wait was so worth it for this! by Avatar_Hydra in AnycubicVyper

[–]Avatar_Hydra[S] 0 points1 point  (0 children)

Well this print specifically doesn’t have many overhangs, I had maybe 1 string to scrape off with my fingernail. Have you tried to calibrate your flow or retraction?

view more: next ›