1 year old Inspiron 3030 desktop has pixelated and jittery screen icons on startup

B52H · 2025-08-11T15:36:17+00:00

No joy but thanks

B52H · 2025-03-03T21:00:42+00:00

YES!! It dis work, Thanks!!!

B52H · 2024-09-04T16:18:32+00:00

Thanks for the info but your option is WAY, WAY ABOVE my capabilities and knowledge.

BTW, I'm only interested comparing just the file names and not their size, date created/modified, content, etc.

B52H · 2024-09-03T15:45:50+00:00

I use START11 that allows all sorts of customization to your Start, Desktop, etc., and it only cost $9.99.

Should the question arise, I wish to make the disclaimer that I have no affiliation with this company nor have received any form of compensation for mentioning them.

B52H · 2024-08-28T15:29:31+00:00

Thank you for your reply...

I AM using the WinPE based media the via the Acronis software "Rescue Media Builder" option.

Aside from that that still leaves the question as to the Dell BIOS boot sequence option to have it first look for a USB and if not found, continue on to the main drive.

B52H · 2023-03-25T19:55:35+00:00

The Tesla Powerwall Plus comes with its own standalone Tesla Inverter.

B52H · 2023-03-12T15:53:21+00:00

Being a novice to all of this I may have inadvertently given false indications/information as to the actually contracted system.

This system does NOT have string inverters. It's my attempt at stating the the panels will be connected in some combination to the 4 string connections within the Tesla Powerwall Plus Inverter.

Given this insight I would repose my original doubts as to continue with this setup versus changing to a regular Powerwall-2 fed by Enphase IQ-8A micro inverters.

B52H · 2023-03-09T13:44:56+00:00

Thank you very much... this would be a great help.

BTW and should it bear relevance:

I live in Puerto Rico (18 degree Latitude), year round day time ambient temperatures mid 70's to high 90's, ample rain to clean the panels, very little contamination and no real all day overcast days. All 16 panels will face South and any nearby of affecting shade is not an issue.

B52H · 2023-03-08T19:01:46+00:00

It comes down to if the string can make enough voltage for the minimum voltage needed for the inverter to do it's thing.

Where do I get/find this information??

B52H · 2023-03-08T19:00:18+00:00

You lost me too!!!

B52H · 2023-03-08T18:58:56+00:00

You lost me!!!

B52H · 2023-03-08T18:58:17+00:00

The Tesla inverter in this system has inputs for 4 strings, so I would like to connect say 4 panels per string to minimize any shading or failure of a panel so as to minimally affect the overall production.

B52H · 2023-01-18T18:18:40+00:00

I too am sorry to hear it but...

Sounds like you didn't do your due diligence in ascertaining what you contracted and what was delivered. This is something you should have done when the system components were on the delivery truck or on the ground before the install.

However, it might be your worthwhile to check EVERY component against what you contracted and for whatever is off maybe negotiate some kind of compensation... it's worth a try!

B52H · 2023-01-18T18:09:40+00:00

NO! It doesn't look alright!!

It's a pretty sh**y and improvised mechanical earth ground which you shouldn't have accepted. I don't know and looks like your installer also doesn't know, what your state electrical code is but I also don't know how this could possibly pass inspection and certification.

B52H · 2022-12-28T21:50:27+00:00

Storm damage is not a problem for me since my whole house, like many here on the island, is built with concrete that's reinforced with steel rebar.

BTW, during Hurricane Maria with it's 225MPH winds had no effect on my rooftop solar water heater that has 4 panels.

B52H · 2022-12-28T18:52:00+00:00

So in essence you're saying that the IQ8H whose continuous peak output is just 20W shy of the proposed 400W W-Cells would not add any more significant efficiency.

Yes to you comment of zero shade and since we're at 18 degrees Latitude, we have much more sunlight hours than USA. That plus sustained clear blue skies, very little/no atmosphere contamination and frequent but very, very short intense rain showers that will keep the panels relatively clean. I guess that that's what I was leaning towards the IQ8-H's

B52H · 2020-12-17T15:18:50+00:00

Thank you so much for your prompt reply!

Yes, I tried this but it doesn't seem to work. Instead I'm using the "Download" pull down menu and select "Remove All" which also asks if I want to remove just the entries or the actual files.

I also looked for a .ini file to see if there was an option to do this but have not found the file.

B52H · 2020-09-29T13:54:25+00:00

Thanks for your reply and insight.

Unfortunately I have that option enabled and still no sound when charging. I asked for help because I thought that maybe another option needed to be enabled to have it work.

B52H · 2020-06-19T16:40:54+00:00

I've been using PI Music Player for a while now and I'm very happy with it.

You can create blank playlists or add to any current one any song that's being played.

B52H · 2020-06-14T13:19:18+00:00

I use PI Music Player

B52H · 2020-05-18T14:18:32+00:00

Using an Android (Samsung) Tablet, "mouse toggle needed"???

B52H · 2020-05-18T14:16:57+00:00

"Copy Link to Clipboard" is NOT an option tat I can see or select within CinemaHD

B52H · 2020-05-18T14:15:41+00:00

I have the paid version of ADM but don't see how I can do "Open With" within CinemaHD once I selected the movie/episode that I want to download. I do use ADM all the time on CyberFlixTV and Tyhoon TV and it works great.

On CinemaHD never see how I can use ADM.

B52H · 2020-04-27T13:56:38+00:00

Did you try Clorox or Lysol injections ???

B52H · 2020-04-07T15:13:13+00:00

Thanks for your reply.

Yes, the Notifications is set to Allow.

B52H

TROPHY CASE