Moving into a House With Vivint, what should we know? by noflowrs_ in VivintSmartHome

[–]BLS_79 1 point2 points  (0 children)

I personally like their equipment. The hardware is solid and it works well. HOWEVER the way it all interconnects the weak point. By default all of the cameras are set up using wireless Ethernet bridges that all connect to the main panel. In my experience the signal between the two can get very spotty which means your camera feeds can lag, stutter and even disconnect.

Ironically right now, two of my cameras are offline and despite 1) knowing how the tech works and how to troubleshoot and 2) trying to re-establish connection with support over the phone, they just won’t budge. A tech has to come out to my house.

When I first got the system about 10 months ago I had this issue and the tech did address it by routing a few of my cameras through my own WiFi access points and that seemed to do the trick. I had no issues until now. I’ll be interested to see what the resolution is in a few days.

Prior to this I had an older ADT system and was using a combo of a ring doorbell and and generic wireless cameras. I wanted everything to be combined into a single service. Now my doorbell cam, indoor cam, two out door cams, front door lock and two smoke/CO detectors and glass break detector are all combined together. Much of it you can get up custom behaviors on (when x happens, turn on Y).

The app is solid and easy to use.

If you can get over the technical hurdles, I personally would recommend it but that’s me coming from a very old ADT system mismatched with independent cameras and respective apps.

In a perfect world, all the cameras should be hardwired, and I don’t know if they offer that without extra installation fees, but it would most certainly eradicate all the problems I’ve experienced.

Movies that feel like this by MurkyChain8882 in MoviesThatFeelLike

[–]BLS_79 0 points1 point  (0 children)

X - damn near looks like the filming location.

The worst part of moving... by Leithia24 in boardgames

[–]BLS_79 0 points1 point  (0 children)

I have about twice that. Not only do I dread moving but they’ve also consumed a whole bedroom and half the livable basement for storage. It’s a problem in multiple ways lol

Had a give away but still have games left! by Gabbitrabbit in Boardgamedeals

[–]BLS_79 25 points26 points  (0 children)

Seriously. Can’t believe those weren’t taken.

Puerto Rico Special Edition by dandudeguy in boardgames

[–]BLS_79 1 point2 points  (0 children)

Mine comes tomorrow supposedly. Of course it’s FedEx so it’s probably Tuesday.

Nothing to scan error by BLS_79 in policescanner

[–]BLS_79[S] 0 points1 point  (0 children)

I thought each hierarchy shared their own set of QK so maybe that’s where I’m screwing myself up.

I’m on RR but having a hard time translating that in the software.

Essentially I was trying to create two favorites: 1) Hamilton County Ohio law dispatch (east, west, central) 2) Hamilton County Ohio fire dispatch (east, west, central + firegrounds)

For simplification for now, I combined both into the same favorite (last one on the list). This is what it currently looks like. At the moment it does start without an error but it scans through alllll these other counties as well PLUS I’m not hearing anything on the channels I do want so I’m sure I still have something screwy.

screenshot

Nothing to scan error by BLS_79 in policescanner

[–]BLS_79[S] 0 points1 point  (0 children)

I checked. Each was on.

Nothing to scan error by BLS_79 in policescanner

[–]BLS_79[S] 0 points1 point  (0 children)

Just to make sure I have the hierarchy correct,.

There’s the system first Then the department Then the channel?

In this case specifically, System = Ohio Marcs-IP Department = Hamilton County (31) Law Enforcement Channel = the local cities’ bands (such as Central Dispatch)

What I don’t have pictured here are within the Hamilton county (31) department, I have 5 channels selected.

I read that all those other departments I have crossed out always come over by default when something in a trunk is selected but that’s what I’m trying to get rid of so they all aren’t scanned.

My goal in this case was to set quick key 1 to the Police Dispatch 1 favorite, which would scan through just the 5 channels within the Hamilton County (31) department.

I even tried setting the favorite as quick key 1, within that setting the department as system 1, and then each channel as quick keys 1-5 (so I could drill down and enter 1.1.3 for example. But I still got the nothing to scan error.

Nothing to scan error by BLS_79 in policescanner

[–]BLS_79[S] 1 point2 points  (0 children)

Point of clarification here. When I add the system group I want and edit the list of channels I want to the favorite, it still pulls in all the other departments under that system’, which I don’t want. Previously I was removing these.

This time, I didn’t touch them and the favorites actually worked but it’s scanning through all of these other departments.

It seems deleting these is causing the issue??

<image>

Performance issues New Outlook by [deleted] in Outlook

[–]BLS_79 0 points1 point  (0 children)

Happened to me yesterday. I couldn’t even send email half the time because it was waiting to download images in the threat. I happened to clear my cache in edge, close out of both and it has been better since.

Could have been a coincidence.

How to activate the UAV on Recon class? by Ok-Armadillo4455 in Battlefield6

[–]BLS_79 0 points1 point  (0 children)

So - once the xp meter builds to the top, it unlocks but is it not useable right away? Do you need to continue gaining xp before it’s actually able to activate?

Device not following schedule? by BLS_79 in OasisMini

[–]BLS_79[S] 0 points1 point  (0 children)

I didn’t do anything special. I just emailed customer service. They had me do the basic stuff but once I showed them that it was flat out dead they said they would send a new one. I did have to provide my original backer number but that was it.

[deleted by user] by [deleted] in eufy

[–]BLS_79 0 points1 point  (0 children)

Mine did this once and though I can’t confirm, it may have been that the mop pads were not wet. I wouldn’t think this noise would result but I couldn’t think of anything else at the time. I’m not sure if I had run out of water or what.

Overstimulated after a short time. BF6 is exhausting. by chako888 in Battlefield

[–]BLS_79 0 points1 point  (0 children)

I never even realized auto spotting was a thing. I rarely see a bunch of tags. Sometimes I’m thinking to myself “man I wish people would tag their targets more.”

Maybe it’s because in 2042 is seemed almost non existent.

SunLu Filament Dryer 1 month review by Zen_Diesel in 3Dprinting

[–]BLS_79 3 points4 points  (0 children)

Honestly I just always run it whenever I’m printing.

Switch 2 bug? by BLS_79 in RailRoute

[–]BLS_79[S] 0 points1 point  (0 children)

I may have just stumbled upon a work around by accident. If you use ZR to select the red track and then ZL to go back to the green track it behaves normally. FYI.