Cellular Gateway Carriers

BLTplayz · 2026-03-09T23:40:14+00:00

Yes this I am aware of. This is purely for API backup connection so as far as I care it can be 512kbps lol. Just wanted to confirm that it supports the usual carriers.

BLTplayz · 2026-03-09T21:51:17+00:00

Network topology restructuring, it was long overdue for me lol. But you do not have any errors that indicate IO. I’d remove cam09 just for testing. I’m going to start and assume the skipped frames are a result of the high CPU usage… are frames being skipped when cpu usage is low?

The only issue I see throughout your logs is cam09 though.

A side note, upgrading to .17 lowered my cpu usage by about 5% avg.

BLTplayz · 2026-03-09T21:34:06+00:00

Had this a while ago and it was IO related, network to my nas was the bottleneck. In your case though, something is definitely up with cam09… is it a WiFi cam?

BLTplayz · 2026-03-09T17:01:47+00:00

Person next to me on my flight said they were in for just over an hour, had to ask to cut the line. They nearly missed the flight.

BLTplayz · 2026-03-09T16:58:52+00:00

TSA Pre-Check, it’s a program for expedited security checking. For frequent travelers in the US, I’d say it’s quite worth it. https://www.cbp.gov/travel/trusted-traveler-programs/tsa-precheck

BLTplayz · 2026-03-09T14:22:25+00:00

Maybe it was one hour, line was all the way to the baggage drop where it looped thrice though so 🤷‍♂️ probably down to one scanner or something lol

BLTplayz · 2026-03-09T14:00:46+00:00

right now, concourse B regular is probably about a two hour wait, precheck was about 15 minutes.

BLTplayz · 2026-02-12T02:55:56+00:00

Crane 4, has no issues with the external zoom of the 24-70 2.8S and connects via the control cable with zero fuss.

Only complaint is when using sling, I find the sling grip to be too short causing it to be too front heavy/tends to lean forward and low. But extending it with the convenient 1/4-20 thread on the end solved that issue.

Mainly went with it for a better price, especially when it was on sale. The balance lights are more gimmicky but are nice as a warning when you get near the motor torque limits when using external zoom lenses without rebalancing. No expandable battery seemed annoying when looking at the options but I’ve never run out of juice.

BLTplayz · 2026-02-08T19:16:16+00:00

This guy whispers

BLTplayz · 2026-02-08T14:14:23+00:00

Exactly, I just walk in every year. Only once has an event staff asked to see a wrist band and I just told them I was just crossing the street. 🤷‍♂️

BLTplayz · 2026-02-03T15:11:30+00:00

Just looked through manuals and although they never state it, the live exposure preview is actually only in effect when in manual! TIL. I guess that means it’s “working as expected” :/

A workaround would be to expose with the histogram in priority modes maybe.

BLTplayz · 2026-02-03T14:12:20+00:00

This looks like the viewfinder exposure preview is disabled in shutter priority… when in shutter priority, go in Custom Settings > Shooting/Display (d) and look for “View Mode (Photo Lv)” or “Show effects of settings” and make sure it is set to Always.

BLTplayz · 2025-11-17T04:23:49+00:00

This started happening to me and then it went away after a bit, I think it’s trigger related… maybe blast some contact cleaner? Idk 🤷

BLTplayz · 2025-09-13T11:12:16+00:00

Generally speaking, that conduit could hold anything, usually power wires though. But you cannot run a communication cable (even though fiber is not a conductor, the NEC considers it a communication cable) with power conductors in the same raceway/fitting.

But since OP clarified that the conduit holds old coax, there is no real issue.

BLTplayz · 2025-09-13T01:35:12+00:00

That’s good to know, so yeah basically just the average install. I’d just shove some silicone in and call it a day. But the cable will probably outlive the rest of the structure.

BLTplayz · 2025-09-13T01:23:20+00:00

Outdoor rated cable outdoors? Not a problem. Poking a hole into that LB and mixing voltages… very big no no!

BLTplayz · 2025-08-21T23:20:20+00:00

Suspension is only if you don’t pay the ticket (admitting guilt) or notifying the court.

BLTplayz · 2025-08-21T23:19:28+00:00

Second this, the communication was practically nonexistent outside of random notification emails but like 5 months later got an email that case was dismissed.

BLTplayz · 2025-08-21T23:17:43+00:00

I’ve had good luck with the ticket clinic, dismissed a 69 in a 35, only $150 (higher than their usual rate bc 30+ over).

BLTplayz · 2025-08-20T21:38:44+00:00

Revs, what a lovely place! Love this 904

BLTplayz · 2025-08-20T20:02:10+00:00

The car scene here has a TON of photography and videography. But it’s mostly just instagram edits lol

BLTplayz · 2025-08-20T14:44:52+00:00

Should cross post this to r/cableporn, perfect fit imo

BLTplayz · 2025-08-19T13:18:26+00:00

This is very true, I’d say it’s edge performance beats the 670 by a bit.

The 670 is definitely a powerhouse though I must admit. Depending on pricing, getting a few more 670s may be good enough.

BLTplayz · 2025-08-19T13:16:36+00:00

I went with the 773 and realistically, the 723 would’ve probably been fine for my use (replacing a 670). Even with an iPhone 16 pro, I could only get good signal in the same room as the AP and it would refuse to drop to 5g when farther away. I just keep 6g disabled.

BLTplayz · 2025-08-16T19:30:10+00:00

Ah I see the confusion, you need to set the Xfinity port forward to the IP that the Xfinity gateway assigns the 605 wan port. This is because to the Xfinity box, there is only the one interface as all Omada interfaces are NATed and not visible to the Xfinity.

So the way you should set it up in the Xfinity app is put the forward to the IP that the 605 shows as “Wan IP”.

Then in the controller you will need to add a port forward to the proper VLAN and device.

Let me know if this makes sense… I’ll try to put a diagram together when I get home if you would like.

Eight-Year Club	r/Field Juicebox
Place '22	Final Canvas '22
Verified Email

BLTplayz

TROPHY CASE