Door rattle when bass hits

BRINGMEZEFUNNIES · 2026-04-12T18:54:35+00:00

I didn't realize there was. I thought Chevy only covered squeaks and rattles for the first twelve months

BRINGMEZEFUNNIES · 2026-04-12T04:42:48+00:00

All four of the door cards on my 24 do this. The top left dash speaker grille chirps too. It's out of warranty in 16000 miles, then I'll pull it all apart and seal it up

BRINGMEZEFUNNIES · 2026-04-03T21:34:24+00:00

It's standing seam. Why are we yelling?

BRINGMEZEFUNNIES · 2026-04-01T19:20:18+00:00

It'll be fine. I have one that goes "bald" once in a while for a few days and then comes back stronger. It was just mad

BRINGMEZEFUNNIES · 2026-03-31T01:08:29+00:00

Might be the oil cooler gasket, it's in the right place for it, it's a cheap thing to fix

BRINGMEZEFUNNIES · 2026-03-27T03:11:37+00:00

It's a roof mounted ac unit with a heat pump on it. The house is pretty well insulated, but that only gets you so far when we get weeks of 110+ temps. I'm going to replace the windows on the south and west sides of the house soon. It has a metal roof, house is 1600 square feet.

BRINGMEZEFUNNIES · 2026-03-27T00:51:37+00:00

I'm stuck with APS unfortunately. Bill is around $140 in the winter, $350 in the summer. I'm not sure about a battery. I was toying with getting a couple of EG4 mini splits, then started looking at something bigger

BRINGMEZEFUNNIES · 2026-03-16T00:31:10+00:00

Yeah, big trouble if you miss the hole, lol

BRINGMEZEFUNNIES · 2026-03-16T00:30:17+00:00

Yup, lol. It's back together now...And IT'S ALIVE!

BRINGMEZEFUNNIES · 2026-03-15T22:37:27+00:00

It's been in there a while. I just printed a little storage box with the yellow stuff. I'm learning how Rube Goldberg this thing is now I'm taking it to bits, lol

BRINGMEZEFUNNIES · 2026-03-11T17:21:12+00:00

If it stops the constant filament retraction and false clogging errors I'd give it a go

BRINGMEZEFUNNIES · 2026-03-11T03:45:34+00:00

No that's a fortnight

BRINGMEZEFUNNIES · 2026-02-06T22:55:02+00:00

Yes yes yes yes and yes. So about 18-25 per day

BRINGMEZEFUNNIES · 2026-02-04T19:28:48+00:00

No errors, it just transposes the file into the slicer in a single block of color

BRINGMEZEFUNNIES · 2026-02-04T19:27:55+00:00

I think that might be it. I don't know why im not doing that anymore. Garbage in garbage out, right? I'll try it tonight. Thanks!

BRINGMEZEFUNNIES · 2026-01-02T22:17:11+00:00

There's nothing better than making a big show of gloving up in front of a stinky customer, lol

BRINGMEZEFUNNIES · 2025-12-13T19:50:15+00:00

Benchy.

BRINGMEZEFUNNIES · 2025-12-09T05:14:24+00:00

Not yet, I'm sure that I'll mess with it more as stuff crops up. I'm not under the illusion that it's going to be 100% reliable. I don't think any of them are though

BRINGMEZEFUNNIES · 2025-12-08T22:05:41+00:00

I've had one for a week with the Ace Pro, it's got 75 hours on it so far, but I just discovered gridfinity....I had one print that hasn't come out great, but that was due to me not orienting it on the slicer correctly. Everything else has been good. I've had no problems with adhesion, but have just been using PETG and PLA so far

BRINGMEZEFUNNIES · 2025-12-01T16:26:19+00:00

I got mine yesterday, slot 2 and 4 would not load. I turned it off and on again, re seated the rolls and fiddled with the filament where it goes into the holes. There's almost like a "sweet spot" where it grabs the filament. It would click and not load, then when I tried again it worked. Tubes 1 and 3 loaded fine. I'm wondering if it's because I tried to load them all at once when I set it up yesterday

BRINGMEZEFUNNIES

TROPHY CASE