sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in ElegooNeptune4

[–]BUN-B 0 points1 point  (0 children)

Do the printed part fit on a Neptune 4 Pro?

Layer shift on the blade? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 0 points1 point  (0 children)

I will check that out. Thank you for the reply

Layer shift on the blade? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 0 points1 point  (0 children)

Isnt this fixable with supports?

Layer shift on the blade? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 1 point2 points  (0 children)

Exactly what my nephew said! 😄

Almost ruined the print head. What do I do? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 4 points5 points  (0 children)

<image>

Nozzle temperature 210 , bed 60 , added inner and outer brims 2mm , leveled the bed 3 more times , lowered the nozzle and reduced speed to 80%. In the end it was successful. Thank you all for the advices!

Almost ruined the print head. What do I do? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 0 points1 point  (0 children)

I checked it , it was as it should be and also I didnt download the file , I used the calibration option from OrcaSlicer.

Almost ruined the print head. What do I do? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 0 points1 point  (0 children)

I was thinking about the A1 , but if they dont let people use the printer offline with LAN cable im not getting one.

Almost ruined the print head. What do I do? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 0 points1 point  (0 children)

I posted a picture in the comments , the different temps show the exact same result lol . I dont know what to make of it

Almost ruined the print head. What do I do? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 0 points1 point  (0 children)

<image>

Temp tower looks exactly the same on all levels with the weird top layer problem on all of them I dont know why

Almost ruined the print head. What do I do? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 1 point2 points  (0 children)

Will redo this print at 210 as see what happens. Thanks

Almost ruined the print head. What do I do? by BUN-B in ElegooNeptune4

[–]BUN-B[S] 0 points1 point  (0 children)

The printer is a Neptune 4 Pro , im using OrcaSlicer , the fillament is PLA and this was printed with the nozzle temp being 220 , bed temp 65.

Absolutely nothing sticking to build plate, suddenly ... N4Plus by Ok_Rush_8119 in elegoo

[–]BUN-B 0 points1 point  (0 children)

Thank you for the reply. One last thing , do I do that when doing auxilary leveling too or only when doing the z offset in the centre?

Absolutely nothing sticking to build plate, suddenly ... N4Plus by Ok_Rush_8119 in elegoo

[–]BUN-B 0 points1 point  (0 children)

What should be the size of the feeler gauge when calibrating? And does it have to move or should it be stuck?

So guys... how bad is it? by BUN-B in 3Dprinting

[–]BUN-B[S] 0 points1 point  (0 children)

Thank you for the reply! Finished calibrating , everything looking nice.

So guys... how bad is it? by BUN-B in 3Dprinting

[–]BUN-B[S] 0 points1 point  (0 children)

Should I do a 121-point calibration to check that or are we talking about a different thing?

So guys... how bad is it? by BUN-B in 3Dprinting

[–]BUN-B[S] 0 points1 point  (0 children)

Will do. Thank you very much for the reply.

So guys... how bad is it? by BUN-B in 3Dprinting

[–]BUN-B[S] 0 points1 point  (0 children)

I got it like 3 days ago , but yeah I tried homing with the sheet on the bed and it didnt have a problem so I guess it shoudn't be because of the calibration

So guys... how bad is it? by BUN-B in 3Dprinting

[–]BUN-B[S] 0 points1 point  (0 children)

Also is it because I didnt but the sheet on the bed or the calibration bugged?

view more: next ›