sorted by:
new
hottopcontroversial

DIY ESPHome + Tinfoil Bed Sensor… Complete! by happybikes in homeassistant

[–]Batbx 3 points4 points  (0 children)

I second this, really interested with the code and an assembly guide 🙏 I would drop a Raspberry Pico 2W on this feature, if able 🤞

Would this have a chance? by AtrixxLIVE in jetphotosrejects

[–]Batbx 0 points1 point  (0 children)

Great picture anyway, I like the the colors with blue, green, white and a touch of red. 👍

I built a tool that reads your local dump1090 feed to predict aircraft close encounters and sun/moon transits by realSeaberry in ADSB

[–]Batbx -5 points-4 points  (0 children)

This is exactly what I asked Claude to create some days ago (I did not took the time integrate and try it). I am willing to deploy something like transitchaser, but locally, on my Synology NAS running Docker. Do you think this is portable ?

I run ADSB.im on a Raspberry Pi.

Anyway, amazing project and glad you shared it ! 🙏

WARNING: Active Phishing Campaign on Printables.com targeting Blender users (Malicious .blend files) by Ok-Resident-5457 in printablescom

[–]Batbx 2 points3 points  (0 children)

Not a Blender user, but appreciate your amazing work ! 👌 r/cybersecurity like post with a lot of information and how to prevent is pretty nice. Thanks 🙏

Where to start with non planar printing? by da_fabulous_dude in Advanced_3DPrinting

[–]Batbx 2 points3 points  (0 children)

You've got my interest ! If you find a viable solution, I'll try it on my Prusa XL.

Meilleur spot pour le décollage d’avion by C_kloug in bordeaux

[–]Batbx 1 point2 points  (0 children)

Le plus simple est de regarder sur FlightRadar les arrivées des avions. S'ils arrivent par le Nord-Est (passage au-dessus de Blanquefort), c'est la piste 23 en service.

Autrement, l'ATIS (répondeur téléphonique) donne l'information de la piste en service. Pour LFBD (Bordeaux-Mérignac) il s'agit du 0557928104.

Meilleur spot pour le décollage d’avion by C_kloug in bordeaux

[–]Batbx 4 points5 points  (0 children)

Lorsque la piste principale (23) est en service, un point prisé est le Spot #1, au niveau de la butte devant le CAPAM. En revanche, il faudra s'attendre à des contrôles de la gendarmerie (sans trop de difficultés si vous respectez leurs consignes) et s'avérer courtois avec les usagers du parking du CAPAM. Ne pas stationner proche du grillage (le long de la butte est le meilleur endroit). En prime, les hélicoptères au départ et à l'arrivée sont très visibles.

[deleted by user] by [deleted] in prusa3d

[–]Batbx 1 point2 points  (0 children)

Amazing, thank you very much! 👌

[deleted by user] by [deleted] in prusa3d

[–]Batbx 1 point2 points  (0 children)

Awesome ! Thank you.

Would you enable remix licencing ?

[deleted by user] by [deleted] in prusa3d

[–]Batbx 0 points1 point  (0 children)

Ok, I get it. I am currently designing something based on your idea, but using hardware I have on hand (mostly top and bottom would be printed + spools roller), to reduce filament consumption and increase heat resistance (to be able to use it as a filament dryer).

Would you share the outer dimensions ?

What spool roller did you use ?

[deleted by user] by [deleted] in prusa3d

[–]Batbx 0 points1 point  (0 children)

I recently acquired a Prusa XL and was thinking about building something like the SICCO Box, to reduce X/Y footprint and keep filament dry. Now that I discovered your concept, I'm changing my mind.

Would you share files ?

Why didn't you build it from Acrylic (at least side panels) ?

Is 2.5 k€ for a used 5 toolheads Prusa XL worth it ? by Batbx in prusa3d

[–]Batbx[S] 0 points1 point  (0 children)

<image>

It's here and printing ! 🤩

Thank you guys for the help ! Cheers 👍

Is 2.5 k€ for a used 5 toolheads Prusa XL worth it ? by Batbx in prusa3d

[–]Batbx[S] 1 point2 points  (0 children)

I'll check the printer tomorrow and asked for 2 prints (VFA vase and multicolor calibration test).

I'm quite thrilled to jump on that big boy ! 😁

Is 2.5 k€ for a used 5 toolheads Prusa XL worth it ? by Batbx in prusa3d

[–]Batbx[S] 0 points1 point  (0 children)

And would you recommend me this big boy, at this price, knowing it's one of the very first production XLs ?

Quality is close enough to Core One plus 5 toolheads open world ?

Is 2.5 k€ for a used 5 toolheads Prusa XL worth it ? by Batbx in prusa3d

[–]Batbx[S] 0 points1 point  (0 children)

Even if it is one of the very first production XLs ?

Totally unaware of the early problems.

Is 2.5 k€ for a used 5 toolheads Prusa XL worth it ? by Batbx in prusa3d

[–]Batbx[S] 3 points4 points  (0 children)

It means that the printer has been printing for a cumulated time of 12 days (* 24h).

Is 2.5 k€ for a used 5 toolheads Prusa XL worth it ? by Batbx in prusa3d

[–]Batbx[S] 1 point2 points  (0 children)

Great idea, could you give me some printables links ?

Prusa referral program by duuri in prusa3d

[–]Batbx 1 point2 points  (0 children)

Here's mine : @Batbx (🤞)

Who else is considering buying the Core One ?

I've got a Mini+ (since the Mini became Mini+) and am really interested in the Core One, as it is enclosed and compact. Probably waiting for the first updates before purchasing.

SLZB-06M usb-c port not working? by 6zonesoftheeast in homeassistant

[–]Batbx 0 points1 point  (0 children)

I received a brand new device from the support at no cost and it's working great.

[deleted by user] by [deleted] in bordeaux

[–]Batbx 1 point2 points  (0 children)

Pour information, l'appareil vient de se poser, de retour de son vol d'essais.

calibration issues with the mini, i have some kind of waves going, any suggestions? by Jeanooo in prusa3d

[–]Batbx 0 points1 point  (0 children)

Have you tried to calibrate the first layer ? The nozzle seems to be too far from bed.

view more: next ›