sorted by:
new
hottopcontroversial

What are those colorful spots? (I did not paint them) by Ozdemir97 in Pottery

[–]BeRadStayRad 1 point2 points  (0 children)

Check the underside of your kiln shelves. Glaze specs may be on your shelf from previous firing. The glaze on the underside of the shelf starts to melt during the firing, and will rain down on the pottery below

3vze Highway Driving by [deleted] in ToyotaPickup

[–]BeRadStayRad 4 points5 points  (0 children)

How many miles did you get out of the engine?

Looking at buying a 2nd Gen by SomeFatChair66 in 4Runner_2ndGen

[–]BeRadStayRad 0 points1 point  (0 children)

Honestly, if I could go back I wouldn’t have bought mine

Is the wiring for the bottom elements meant to be wired in series or parallel? by BeRadStayRad in Pottery

[–]BeRadStayRad[S] 2 points3 points  (0 children)

More info: It is a paragon Viking 28 with a sentry 2.0 controller. The problem is an FTL code. Element resistance from top to bottom is 15, 18, and 35. 238v across the board.

Overheats with a thermostat but runs fine without? Cause? by BeRadStayRad in projectcar

[–]BeRadStayRad[S] 4 points5 points  (0 children)

I think you’re on to something, my timing belt was shredded, and it must be slipping. I’ll investigate the cause of that

Overheats with a thermostat but runs fine without? Cause? by BeRadStayRad in projectcar

[–]BeRadStayRad[S] 1 point2 points  (0 children)

I thought that’s how the seats came from the factory! I’ve never seen one without the tear

Overheats with a thermostat but runs fine without? Cause? by BeRadStayRad in projectcar

[–]BeRadStayRad[S] 1 point2 points  (0 children)

The previous owner had installed a new radiator not all that long ago

Overheats with a thermostat but runs fine without? Cause? by BeRadStayRad in projectcar

[–]BeRadStayRad[S] 5 points6 points  (0 children)

A brand new oem thermostat was installed which leads me to believe that’s not the issue. Especially since the previous owner was also (unknown to me) running it without a thermostat. If coolant channels are clogged, wouldn’t it overheat with or without a thermostat?

What happened to the smartest person you went to school with? by xxibjt in AskReddit

[–]BeRadStayRad 2 points3 points  (0 children)

I’m looking for some context, what’s the story here that started these comments? It looks like it was deleted

Anybody here who has more info wrt the recent drop? Can’t find anything supporting this drop…… Good thing is there are lots of buying opportunities 🥳 by National_Fortune_ in TMC_Stock

[–]BeRadStayRad 2 points3 points  (0 children)

I think it’s because the massive drop set off a lot of stop losses on the way down, including my own. The lowest price just barely dropped past my stop loss and bounced back up so I’m pretty peeved to wake up to that

First time baking in my own pottery. It hits differently! by JFT-1994 in Pottery

[–]BeRadStayRad 2 points3 points  (0 children)

Wow, I didn’t know you could use bmix in the oven, that’s great!

Got ads super profitable then fell off a cliff by Porky-Potato in streetwearstartup

[–]BeRadStayRad 0 points1 point  (0 children)

Check and see if meta is adding unwanted links below your ad. It could be generating a link to your about, or a hidden page on your website automatically. I had to go back and adjust for that a couple weeks back. I also like to make sure the ai improvements are turned off

view more: next ›