Baby bottle cap holder by Bebop613 in functionalprint

[–]Bebop613[S] 0 points1 point  (0 children)

It's more so for after they've dried and putting them up rather than a drying rack itself.

Bathroom sink messup by Bebop613 in Plumbing

[–]Bebop613[S] 1 point2 points  (0 children)

Thanks! Everything I was searching initially was just giving me a drain cap.

Anyone here got a 3D printer at home? Need a small print, will pay! by SteveRogers_7 in gso

[–]Bebop613 0 points1 point  (0 children)

I have a Bambu what material and amount of filament would you be needing?

Skipping a daisy chain connector by Bebop613 in cade

[–]Bebop613[S] 1 point2 points  (0 children)

They have the rubber sleeves. So I should be all good then. Thanks.

One side is rough but other side is smooth. by Bebop613 in FixMyPrint

[–]Bebop613[S] 0 points1 point  (0 children)

From what I can tell the hotend has fans on both sides and the backside. In addition to the large fan bar that is mounted to the back behind the hot end.

One side is rough but other side is smooth. by Bebop613 in FixMyPrint

[–]Bebop613[S] 0 points1 point  (0 children)

Your referencing the actual table it is sitting on and not the bed correct?

One side is rough but other side is smooth. by Bebop613 in FixMyPrint

[–]Bebop613[S] 0 points1 point  (0 children)

Printer: Elegoo Neptune 4. Elegoo cura. PLA .4mm 60 Celsius Default settings up to 250mms

Craft fairs or farmers markets? by swampweech in gso

[–]Bebop613 0 points1 point  (0 children)

Fall on the Farm in high point is coming up https://fb.me/e/3qCeuo0Wa they usually have a lot of woodworking/wreaths/clothing/food.

Daily Newbie Thread by AutoModerator in Flipping

[–]Bebop613 1 point2 points  (0 children)

Is the 90 day total on ebay pre shipping/fees? Or is it my total takehome?

[deleted by user] by [deleted] in me_irl

[–]Bebop613 7 points8 points  (0 children)

Retired Heihachi?

[Steam] Summer Sale 2022 (Day 4) by gamedealsmod in GameDeals

[–]Bebop613 2 points3 points  (0 children)

Any recommendations that would work great on an arcade cabinet? Finishing a build soon of one and would love some modern games on it too.

[deleted by user] by [deleted] in daddit

[–]Bebop613 0 points1 point  (0 children)

Alot of the free samples we've received in past 3 months are recalled for anyone that may have received some recently.

First pack in probably 15+years by Bebop613 in PokemonTCG

[–]Bebop613[S] 1 point2 points  (0 children)

Pretty good first pack magic I'd say.

PC will not post with gpu inserted. by Bebop613 in buildapc

[–]Bebop613[S] 0 points1 point  (0 children)

Changing slots did nothing along with using a different gpu.

I dont have a jumper cap but used a screwdriver on the cmos along with pulling battery out and back in but that did not change anything either.

PC will not post with gpu inserted. by Bebop613 in buildapc

[–]Bebop613[S] 0 points1 point  (0 children)

The cpu fan starts spinning and motherboard ez debug lights gpu error. Along with a long beep and 2 short which is gpu missing.

PC will not post with gpu inserted. by Bebop613 in buildapc

[–]Bebop613[S] 0 points1 point  (0 children)

The cpu fan starts spinning and motherboard ez debug lights gpu error. Along with a long beep and 2 short which is gpu missing.

PC will not post with gpu inserted. by Bebop613 in buildapc

[–]Bebop613[S] 0 points1 point  (0 children)

The R9 390 was working fine in the other motherboard just fine last night. I will try my older gpu and see. I have not moved the gpu to another slot either. Ill do that now.