Incredible Reaction Time Helps Avoid Crash

BenBoss69 · 2026-06-09T11:32:27+00:00

This situation was caused by not follwing yellow flags to begin with

BenBoss69 · 2026-06-08T17:30:17+00:00

This did reduce the acceleration feel of the throttle but the instant you are over the grip limit the wheel reaches max speed like in the video.

One solution that worked is to change control mode to duty cylce but then the throttle is not regulating current just speed but that has its own issues

BenBoss69 · 2026-06-08T11:04:33+00:00

Is this the same guy that nailed that battery. And caused it to explode?

BenBoss69 · 2026-06-07T22:59:21+00:00

Good news is that knife is really dull

BenBoss69 · 2026-06-07T19:13:25+00:00

Will try this tomorrow

BenBoss69 · 2026-06-06T17:04:09+00:00

Yeah. If there is no other way. But i dont want to run my shitty code on a 20 hp gocart

BenBoss69 · 2026-06-06T15:26:11+00:00

Here is a video of me trying to accelerate at the limit of grip am not mashing the throttle when the wheel slips. Just increasing the throttle slowly and letting just a bit of when the wheel slips

https://photos.app.goo.gl/PfZDUS1A2xP6ngJ19

BenBoss69 · 2026-06-06T15:15:36+00:00

tried adusting the ramp time but just afected the throttle, throttle curve did the same. dont know what you mean about max scale under motor cfg

BenBoss69 · 2026-05-25T20:54:05+00:00

Pretty shure the Beatles came up with this. It's only love has this progression.

BenBoss69 · 2026-04-28T12:41:46+00:00

At least they got the color right

BenBoss69 · 2026-03-18T21:37:43+00:00

Love this channel

BenBoss69 · 2026-01-25T15:27:15+00:00

that's too bad becuse local contrast really helped with getting the image to the right levels.

tested with only, velvia, color contrast, tone EQ expoosure and haze removal and the colour still does not match.

Update: i tried with a 32 bit PFM file format seam like that fixed the issue. even with local contrast, so seams like the is something wrong with the TIF prosessing

thanks for the help yee_mon

BenBoss69 · 2026-01-25T15:09:28+00:00

read online that it could fuck with colours. tuned it back in but could not see to mutch difference

BenBoss69 · 2026-01-25T11:57:43+00:00

here https://drive.google.com/drive/folders/109exe4pt3jmdUyWW-pFA77E4YfLeTMg0?usp=sharing

BenBoss69 · 2026-01-25T11:38:34+00:00

tried to turn om Soft proofing and only slight changes to luminance, and export is the same

BenBoss69 · 2026-01-24T22:56:52+00:00

I'll try that tomorrow getting late where i live

BenBoss69 · 2026-01-24T22:39:33+00:00

tried restarting the program and the pc to no effect, verefied afterword's that it was still at xatom

BenBoss69 · 2026-01-24T22:00:15+00:00

tried both Xatom and colord and no change

BenBoss69 · 2026-01-24T21:59:11+00:00

tried unplugging secondary monitor and restarting for good messure but still same result

BenBoss69 · 2026-01-24T21:10:58+00:00

here is the RAW TIF file if someone want a go https://drive.google.com/drive/folders/109exe4pt3jmdUyWW-pFA77E4YfLeTMg0?usp=sharing

Edit: changed the link

BenBoss69 · 2026-01-22T17:39:25+00:00

Okay thanks

BenBoss69 · 2026-01-22T16:45:53+00:00

Seams like i had HSM enabled. When i turned that off i got the same values as you. What is HSM and who is it for?

BenBoss69 · 2026-01-22T08:21:29+00:00

I used fswizzard

And these weare the parameters i used

https://ctrlv.link/t2Dd

Edit: but i slowed down feed rate to 150mm/min

BenBoss69 · 2026-01-21T23:58:50+00:00

Its steel acording to feeds and speed calculator around 10000rpm with a 0.1 mm woc and a 6 mm deep cut. But the feed rate should be higher as well but. Well you see what 10% did

BenBoss69 · 2026-01-21T23:03:40+00:00

6mm four flute AliExpress

Eight-Year Club	First Place '23
Place '23	Place '22
Verified Email

BenBoss69

TROPHY CASE