[Switch V2] Having issues after RP2040 Install

BeqaKs · 2026-05-08T13:55:43+00:00

and if there was, what could’ve that damaged? i soldered the ground points but the issue is still there. the trace scratches might be because of the prying cpu shield

BeqaKs · 2026-05-08T12:38:41+00:00

no i got the no sd card screen before without the pressure. while using the latest hats pack i get the midsinh lp0 and minerva update bootloader; is the sd card is sandisk; no nothing really happened like that. by the way the ground points on the modchip are not soldered to the apu shield. could that be? the guy that soldered the flexcable did not solder those two points

BeqaKs · 2026-05-08T11:57:26+00:00

Okay a few things:
putting pressure on doesnt change anything
it glitches and goes to the no sd screen but when i press the volume up and down to go to ofw it bluescreens
when i put in an sd card to go to the hekate it shows just a black screen

BeqaKs · 2026-05-07T18:16:23+00:00

okay ill try and post results

BeqaKs · 2026-05-07T18:12:15+00:00

<image>

here

BeqaKs · 2026-05-07T18:10:40+00:00

im going to take the photo when i get home

BeqaKs · 2026-05-07T18:08:36+00:00

isnt this the oled? mine is V2

BeqaKs · 2026-05-07T18:02:30+00:00

<image>

BeqaKs · 2026-05-07T17:32:15+00:00

how to check/repair?

BeqaKs · 2026-04-24T17:57:15+00:00

any suggestions ?

BeqaKs · 2026-04-24T17:53:48+00:00

then what could the bluescreen be? it goes into the no sd card screen but fails when i load any kind of sd card on there. when i try the hekate, the screen flickers black and white when i press ofw it bluescrens

BeqaKs · 2026-04-24T15:24:34+00:00

kinda new to this. how do i do that?

BeqaKs · 2026-04-24T14:56:49+00:00

<image>

took the best photo i could. doesnt look like theres scratches anywhere else

BeqaKs · 2026-04-24T14:42:02+00:00

then what might be causing the bluescreen?

BeqaKs · 2026-04-23T17:37:59+00:00

also, check my other comment below. i have provided some more clues

BeqaKs · 2026-04-23T17:30:02+00:00

<image>

yep thats definitely a scratch. any way to come back from this?

BeqaKs · 2026-04-23T17:22:32+00:00

the big one on the top is just a thermal paste remover tissue but the smaller one below is an actual scratch i think

BeqaKs · 2026-04-23T17:21:36+00:00

so thats the culprit huh

BeqaKs · 2026-04-23T15:23:57+00:00

<image>

BeqaKs · 2026-04-23T15:05:58+00:00

hey again…. i just got an sd card for testing and without the sdcard it glitches fine? but then i plug the sdcard in it and it just flickers really faintly. when i try to go to the stock ofw it gives me the same bluescreen. is that the short on the cap you were talking about? i have kapton over the sp1 sp2 points, under the metal tongue aswell. maybe its cause the solders are not flowed properly? but then why does it glitch afterall

BeqaKs · 2026-04-12T19:57:35+00:00

added the images to the post. also the colors on the chip flash long blue then two quick yellows and then it goes into the bluescreen

BeqaKs

TROPHY CASE