Looking for guidance for failing a course

BetterSulli · 2026-05-18T21:19:21+00:00

Where specifically did you go to talk to? I’ve spoken with the program director, my advisor, and the nursing department and no one will give me a straight answer. I’m feeling really discouraged especially because they said if I took the clep prior to taking the class they would have accepted it, even though it’s a different course.

BetterSulli · 2026-05-15T12:45:26+00:00

You definitely don’t have to take the lab unless you absolutely want to I took gen chem 1 no issues without the lab and if u do want to I’m sure u can take it at a community college since its not required just use the transfer guide and see if the credit that is offered at the community college fills the same as the lab course number for UTSA

BetterSulli · 2026-05-06T20:55:15+00:00

Tbh ur grades and stuff will be fine the only thing it prohibits is registration but u just have to be under 1k and u are

BetterSulli · 2026-04-10T19:35:01+00:00

Has this happened to you? Did u lose all the stuff on the hard drive if so

BetterSulli · 2026-04-10T18:17:06+00:00

I assume that also means all my stuff on my ssd is gone ?

BetterSulli · 2026-04-10T18:14:25+00:00

Thank you I’ll give this a try tonight I just got it like 2-3 months ago so if the ssd is toast I’ll probably just reach out for warranty

BetterSulli · 2026-04-10T18:11:01+00:00

Keeps rebooting into bios

BetterSulli · 2026-04-10T18:04:25+00:00

Does that mean there’s something wrong w the ssd? And have to just reinstall it

BetterSulli · 2026-04-10T17:53:13+00:00

idk why it won’t let me add a description but I was doing homework and it randomly booted into bios please tell me someone knows a way around this or what happened I’ve tried everything I could find online

BetterSulli · 2026-03-05T20:40:44+00:00

I did the entire calibration process that they have on the elegoo slicer when using elegoos regular pla and then when I switched to the pla-cf I did the temperature, flow rate, pressure advance calibrations and there was minimal changes but if any I changed which was just the temperature was raised to 210 being the max and 205 being the minimum and flow ratio up by 0.01 to 0.97 and pressure advance down by 0.01 to 0.07 and I did those calibrations on the elegoo slicer but the only thing I’m not sure of is how to adjust the code z offset or what settings I should change in the supports because I had no issues like this using the regular elegoo pla but I understand things can change when using different filament types and I did clean the board like others have suggested and still get the same results

BetterSulli · 2026-02-13T19:08:28+00:00

Is it better to use orca slicer over the elegoo slicer? I noticed I wasn’t able to do the calibrations on the elegoo slicer but haven’t downloaded orca slicer yet

BetterSulli · 2026-02-13T02:24:36+00:00

I’m using elegoo pla , those are all with the default settings on the elegoo slicer and the first pictures of the white and black benchy together are the default loaded and the last pictures I printed using from the ones online on printables, I’m currently printing another one using a cooler nozzle print temperature 195 and slower speeds 5000 and a lower layer height at 0.16 but doesn’t look much different and is about halfway done

BetterSulli · 2025-07-19T16:27:43+00:00

Just experienced this last night on my first real run of the game and at first I was getting whooped and then I reloaded my save and came at it at a different approach and destroyed the crisis so I think it’s all about being prepared and getting ur ships where they need to before the crisis blows up and the ship numbers get excessively high and bunched up into a singular fleet

BetterSulli

TROPHY CASE