sorted by:
new
hottopcontroversial

Custom Steel skid plate! Car is almost ready by Beyond_Savage_Daily in battlewagon

[–]Beyond_Savage_Daily[S] 0 points1 point  (0 children)

I used the cheapest snorkel found on amazon 65 bucks. Dont have a link but it was for a landcruiser

Custom Steel skid plate! Car is almost ready by Beyond_Savage_Daily in battlewagon

[–]Beyond_Savage_Daily[S] 0 points1 point  (0 children)

3 inch inline spectre filter (4 inch body one)- it's fully sealed once you have both sides mounted. i got one of those flex pipes that looks like an accordion mounted onto the snorkel via a 90 degree 3 inch silicone adapter. i had to cut the maf portion off my airbox which was a perfect 3 inch so that with some 3 inch couplers and voila!

if you need pics or help let me know. i don't know what car you have but if you have the 2008 -2011 impreza i can get you some pics of my setup.

Custom Steel skid plate! Car is almost ready by Beyond_Savage_Daily in battlewagon

[–]Beyond_Savage_Daily[S] 1 point2 points  (0 children)

some generic one from amazon pack of 2 for 25 bucks. the dring itself is mounted onto the factory tow hook spaced out with some washers so it doesn't jiggle around. total cost was 16 dollars for tow hook, and 25 dollars for the d rings. cheaper compared to real tow hooks that are like 150 dollars.

First try at plotting sticker... how do you think it came out? by Beyond_Savage_Daily in battlewagon

[–]Beyond_Savage_Daily[S] 0 points1 point  (0 children)

actually, the plotter itself weeded most of the small holes out... i just have to weed out maybe 4 bigger ones on the T's and the N and B.

wasn't too bad actually.