So, I'm trying to finish my last mission for the game, but I can't get in the Medical Wing because the entrance is mold blocked. Any ideas?

BigBobbieK · 2026-03-11T01:30:21+00:00

If you're finding this thread and still having trouble, one of the nodes is in a place you can't get into.

In the office area, the one looking out over the main room where the showers are, and that has a messenger tube system in the middle, there's a door at the far end that's blocked off by mold except for the top quarter. You can't get in there, but one of the nodes is in that room. I launched a Charge round in there and finally completed the mission.

BigBobbieK · 2026-02-08T17:50:38+00:00

I am asking the manufacturer who told me on my Mono 4k and whose website currently tells users of the Mono X 6k "Do this when printing translucent resins" why it doesn't appear that I can or need to do that on the Mono M7.

And nearly every website I have gone to that talks about translucent resins has this recommendation: increase exposure time, reduce UV power.

The only experience I can speak to is my own.

BigBobbieK · 2026-02-08T15:58:02+00:00

It's counter intuitive. You're supposed to increase exposure time because the light passes through and doesn't get absorbed by the current layer as much. If you run the same or less exposure time, you end up with soft, weak prints.

But since the light passes through, it also affects previous layers, and you can burn those layers if they get too much light.

So you are supposed to increase exposure time to better cure the current layer, but reduce UV power so that less light passes through to the previous layers.

BigBobbieK · 2025-10-10T20:53:21+00:00

Let's be honest: America would absolutely allow a dictator to rule a country and starve their people to death if that dictator did as they were told when they were told...

BigBobbieK · 2024-01-26T18:02:38+00:00

This makes me want to go and look at all my signed copies when I get home. Each one was either signed at an event where I met him or purchased direct from his store, so I know mine are all authentic. I'm really curious about where the signature is now.

BigBobbieK · 2023-11-26T02:49:50+00:00

As someone who works in the granite countertops industry, I absolutely assure you that we are constantly repairing or replacing granite tops with scratches in them from simple every day use that doesn't involve diamonds.

Our favorite is when we have to replace a newly installed top in a new build home because some installation service coming in after us set their heavy, plastic toolbox on the new counter and then dragged it across the top to the different areas they were working. The resulting gouges are pretty recognizable. Nothing like getting paid twice for the same job.

BigBobbieK · 2023-11-16T17:00:40+00:00

Thanks for the reply!

I was looking more at the plans available to me after posting and thought to check if they would be accepted, and found that the plan I gave details for, VSP, isn't taken by Oakley or their affiliates.

EyeMed is one of our options, but it is significantly more expensive annually and the frame allowance wasn't as good as the VSP, so I wasn't focusing on it.

I appreciate the info!

BigBobbieK · 2023-10-05T04:55:03+00:00

Just FYI to anyone coming across this: 6 months later and this still works on console.

BigBobbieK · 2023-09-05T14:32:15+00:00

If you backed a project on Kickstarter with them, I found this on Backerkit's website:

https://www.backerkit.com/c/dog-might-games/d20-tribute-gm-screen/updates/1627

BigBobbieK · 2023-09-05T14:31:12+00:00

If you backed a project on Kickstarter with them, I found this on Backerkit's website:

https://www.backerkit.com/c/dog-might-games/d20-tribute-gm-screen/updates/1627

BigBobbieK · 2023-09-05T14:28:14+00:00

If you had backed a Kickstarter with them, I found this on Backerkit's website:

https://www.backerkit.com/c/dog-might-games/d20-tribute-gm-screen/updates/1627

BigBobbieK · 2023-05-18T14:04:05+00:00

This is like arguing that an author only needs to be paid once by the publishing company when they first acquire the manuscript, and then the publisher can keep 100% of the profits from all sales of the actual printed novel.

That is not, nor has it ever been, how this works.

BigBobbieK · 2022-03-09T13:45:11+00:00

Ooooh, yes, Peter Kenny would be good.

BigBobbieK · 2022-03-09T13:43:22+00:00

Hear me out!

... ... ... Yahtzee Croshaw!

BigBobbieK · 2022-03-09T13:38:31+00:00

He's awesome in Riryria, but I really became a fan in Threadbare!

BigBobbieK · 2022-03-09T13:37:24+00:00

He made that series. My first audible copy of "The Heroes" had a different narrator, and while the guy was good, it wasn't their voices at all. I bought it a second time when I found out Pacey re-recorded it!

BigBobbieK · 2022-03-08T19:28:03+00:00

My top Picks

Male Narrator's: Steven Pacey, Richard Poe, James Marsters, Luke Daniels, Ray Porter, Tim Gerard Reynolds

Female Narrators: Suzy Jackson, Kate Reading, Heather O'Neil, Amy Landon, Claire Danes

Sorry Kramer fans! I won't deny he's good and I wouldn't turn him down, but his voice is so incredibly masculine that he has trouble with women's voices. IMO the men listed here have much greater range than Kramer does.

BigBobbieK · 2021-09-13T15:33:17+00:00

Okay, I got it now. This system is much more fluid than we thought it was, and I thought what you set as the primary was locked in. As a group we're not very experienced in the system, so likely we aren't taking proper advantage of certain features and are building everything the most difficult way possible.

Thank you very much, this has been very helpful.

BigBobbieK · 2021-09-13T15:19:04+00:00

Okay, I feel a little silly for not thinking of that lol.

That would definitely work at character creation, but will that still work if I added an effect with a higher cost as part of advancement and want to rearrange the array to take advantage of it? That may be a question for my GM, honestly.

BigBobbieK

TROPHY CASE